An experimental study of dynamic tensile properties of glass fiber at low-temperatures

Tensile impact experiments of EC8.0−24×7 glass fiber bundles at different low temperaturesT(14°C, −40°C and −10°C) and strain rates ɛ were carried out, and complete stress-strain curves were obtained. Within the range of the experiment temperatures and strain rates, it is found that the initial modulusE, the ultimate strength σ_max and the unstable strain ɛ _b of the glass fiber bundles all increase with ɛ at an identicalT. At an identical ɛ, with the decrease ofT, E and σ_max increase; but ɛ _b increases when 10°C>T>−40°C and decreases when −40°C>T>−100°C. The strain-rate- and temperature-dependent bimodal Weibull statistical constitutive theory was adopted for the statistical analysis of the experimental results, and the Weibull parameters of single fiber were obtained. The results show that the bimodal Weibull distribution function is suitable to represent the strength distribution of the glass fiber at low temperature and different strain rates. The differences in the mechanical properties between EC8.0−24×7 and EC5.5−12 ×14 glass fiber bundles were also discussed. Project supported by the National Natural Science Foundation of China (No. 19772058).     

Influence of the Interaction between Two Neighboring Periodically Curved Fibers on the Stress Distribution in a Composite Material

A method is developed for a stress analysis in an infinite elastic body containing two neighboring periodically cophasaly curved fibers located along two parallel lines. The stress distribution is studied when the body is loaded at infinity by uniformly distributed normal forces in the fiber direction. The investigation is carried out within the framework of a piecewise homogeneous body model with the use of exact three-dimensional equations of elasticity theory. Numerical results related to the stress distribution considered and the influence of interaction between the fibers on this distribution are given.     

利用模式的对称性研究光子晶体光纤的色散

由光子晶体光纤的对称性可以得到模式分布的对称性，根据模式的对称性选择适当的展开函数，可以使计算量大大减少。计算了六角结构光子晶体光纤的色散特性，得到了波长在1．55pm处色散为零时，光子晶体光纤的结构参量所满足的方程。     

中国光纤通信技术的研究、应用和发展

主要从光纤光缆、光器件与组件、光传输设备与系统、光网络建设等方面论述光纤通信技术在我国的研究、应用发展历程，并对我国光纤通信技术的未来发展进行展望。     

光纤接入网步入快速发展期

光纤接入一直是多年来人们不断追求的梦想和探索的技术方向，但由于成本、技术、需求等方面的障碍，至今还没有得到大规模推广与发展。然而，这种局面最近有了很大的改观，出现可迅速发展的势头。主要是因为一些国家政策的扶持、运营商竞争的需要、对收入的追求，以及设备本身价格的下降，光纤接入技术由于各种原因，至今尚未在全球广泛应用，但在日本、美国、瑞典和意大利等国都获得了较多的应用。在中国，光纤接入也有了良好的开端，将在大城市广泛应用，并逐渐推广到全国。     

高入纤功率光纤通信系统的可靠性研究

掺铒光纤放大器(EDFA)和拉曼放大器(FRA)的使用,使得光纤通信系统中的入纤功率有了很大的提高.较高的入纤功率不仅会在光纤中引起各种非线性效应,对光脉冲的传输产生影响,也会对光纤本身的可靠性产生影响,为此介绍了高入纤功率对光纤系统的影响,分析了其产生的机理,并提出了应对措施.     

三包层WⅠ和WⅡ型单模光纤波导色散特性的研究

研究了三包层WⅠ和WⅡ型单模光纤的波导色散特性。结果发现在相同条件下，三包层WⅠ和WⅡ型单模光纤零色散点的调节范围比传统的双包层W型单模光纤明显增大。详细分析了几何参量P、Q和光学参量R1、R2对单模传输时的波导色散特性和低次模截止频率的影响。所得的研究结果为获得更为理想的色散补偿、色散平坦光纤及设计新型无源光器件提供了重要的依据。计算波导色散的方法可推广到多包层光纤。     

1400-1500 nm,Different Material-doped Raman Fiber Lasers Pumped by Nd∶YVO_4 Laser

Different material-doped Raman fiber lasers with very high efficiency operating in continuous-wave are presented.With 1 W Nd∶YVO 4 laser pumping at wavelength of 1 342 nm, single mode output power of above 500 mW (optical-to-optical conversion efficiency of 50%) is simulated in the range of 1 400-1 500 nm.Using high-germanium,high-phosphate and high-borate silicate fibers as the gain medium,laser output at wavelengths of 1 420,1 450,1 480 and 1 495 nm can be achieved with different geometries,which are just as pumping C-band and L-band distributed Raman fiber amplifiers.     

初论带状光纤缆结构设计

推导出了成叠带状光纤在松套管中余长的两个计算公式，此两公式是带状光纤缆结构设计需要用到的基本公式。此外，还对带状光纤缆结构设计作了初步讨论。