单模光纤中模耦合微扰功率谱与偏振关系的研究

提出用测量光纤偏振耦合率来确定模耦合系数，从而得到耦合微扰功率谱与双折射关系。它给出了光纤拉制中微扰作用 的信息，是研制偏振光纤的一种有效方法。     

光纤的淬冷增强原理

本文从拉丝工艺技术的角度出发，讨论了高速、高温拉丝工艺方法对光纤的淬冷增强原理。     

自聚焦棒耦合性能的分析

本文采用光线光学的原理分析了自聚焦棒（ＧＲＩＮ）的光学性能，在折射率分布为抛物线近似的条件下，推导出较为简单的ＧＲＩＮ中的光线轨迹方程，并实验测量了ＧＲＩＮ的耦合效率，从而由理论和实验两方面讨论ＧＲＩＮ的聚焦特性。     

含氰基的酚醛树脂及其碳纤维复合材料

含氰基的酚醛树脂，具有优异的耐高温性能和高温下的机械强度，在３１５℃下性能变化甚小；不着火，发烟量低，有良好的加工成型性能。热固化过程中氰基成三嗪环而交联，没有小分子脱出，是一类具有广泛发展前景的新型热固性树脂。     

Carbon–epoxy composites based on fibers coated with nylon 6,6: hygrothermal ageing versus interlaminar shear strength

Carbon fibers were coated in situ with a thin film of polyhexamethylene adipamide by an interfacial polycondensation technique. The modified fibers were used for the preparation of epoxy-based unidirectional composites. Specimens of these materials were immersed in water until equilibrium conditions were attained. The weight gain at equilibrium was determined as a function of the immersion temperature, the fiber volume fraction and the polyamide content deposited on the fibers. Water penetration in specimens made with uncoated carbon fibers increases when the volume fraction decreases. Introduction of the polyamide interlayer initially increases the water absorption, but reduces it at higher immersion temperatures and/or higher polyamide contents. The treated specimens were subjected to the short beam test to determine the interlaminar shear strength (ILSS). The data show that the ILSS decreases with water penetration but increases when the immersion temperature increases from 40 to 70°C. The overall performance encountered is discussed in terms of the possible roles of the polyamide interphase while taking into account mechanisms concerned with matrix plasticization, interphase degradation and residual stress relaxation.     

高质量的一级光栅1．55μmDFB激光器

本文详细叙述了ＤＦＢ激光器的设计要点和新的工艺。采用一级全息光栅和二步液相外延法批量研制出高稳定单纵模工作的１．５５μｍ分布反馈激光器（ＤＦＢ—ＬＤ）。外延片成品率＞４０％。器件特性：２５℃时阈值电流２０ｍＡ，单面光功率＞１０ｍｗ，主边模抑制比ＳＭＳＲ达４３ｄＢ（λ／４相移光栅），谱线宽度△ν－２０ｄＢ＝０．３ｎｍ，调制速率＞１．８ＧＨｚ。可靠性测试显示：高温监测光谱稳定，２５°Ｃ时阈值退化率△Ｉｔｈ／ｔ＜０．３ｍＡ／ｋｈ，对应器件预估寿命将超过１０万ｈ。     

YAG激光打标机光笔中会聚出纤光的光学系统

智能化大幅面激光打标机中的光笔,采用本文叙述的光学系统会聚多模石英光纤出射的大功率YAG激光,通常能以小于0.2mm的线宽长时间连续地在工件上刻划,仔细调焦后线宽达0.1mm;手持此光笔可进行人工刻写、画及焊接电子元件等.     

Light Scattering by Cylindrical Fibers with High Aspect Ratio Using the Null‐Field Method with Discrete Sources

The problem of computing light scattering by cylindrical fibers with high aspect ratio in the framework of the Null‐Field method with discrete sources is treated. Numerical experiments for investigating the scattering properties of two fiber geometries are performed using distributed spherical vector wave functions as discrete sources.     

Littman光栅外腔可调谐Yb3+双包层光纤激光器

本文对LD泵浦的光栅外腔可调谐双包层Yb3 光纤激光器进行了实验研究．采用Littman外腔结构，研究了Yb3 光纤激光器的调谐特性．输出激光调谐范围42nm，谱线宽度0．08nm，最大输出功率达到了460mW，斜率效率约30％．并对其输出光功率随波长的变化进行了观测和分析．