Some microrheological aspects of wood-pulp fibres subjected to fatigue loading

Wood-pulp fibres are recognized as concentrically-layered, laminated composite tubes of structural reinforcing material, the cellulose microfibrils, embedded in a cementing matrix of hemicellulose and lignin. When the single fibres are subjected to cyclic mechanical action, their morphological behaviour is characterized by the fatigue growth of micro-voids and surface damage which individually and collectively give rise to stress concentrations, and eventually crack development. The progressive damage phenomena, evinced by the surface imaging and optical sectioning techniques through utilizing confocal laser scanning microscopy, are understood to be consequences of the cumulative material micromechanical degradation and subsequent microstructural breakdown of the cellulose microfibrillar framework. This structural breakdown is believed to effect the fibrillation and flexibilization of the fibres This revised version was published online in August 2006 with corrections to the Cover Date.     

Crosslinked polystyrene with improved mechanical properties

The synthesis of some divinyl monomers—bis(vinylphenyl)ethane ( 2 ), bis(vinylbenzyloxy)hexane ( 3a ), and bis(vinylbenzyloxy)dodecane ( 3b ) is reported. Copolymers of the new monomers and styrene were evaluated as an alternative to divinylbenzene-crosslinked polymers for use as matrices and absorbents. The mechanical properties and the amount of residual double bonds in the copolymers were compared. It was found that the new copolymers, unlike the divinylbenzene-crosslinked polymers, retained their mechanical strength even at high crosslinking degrees. Stress at break values of 79, 68, and 18 N/mm² were found for the polymers crosslinked with 20 mol % of 3a, 2 , and divinylbenzene; 5, 25 and 45% of the divinyl units in these polymers were left as pendant double bonds. Porous styrene– 2 copolymers were synthesized and shown to have lower surface areas than the corresponding divinylbenzene-crosslinked polymers. The pore size distribution showed that this was due to the absence of the smallest pores which are found in the divinylbenzene-crosslinked polymers in between heavily crosslinked nodules. © 1993 John Wiley & Sons, Inc.     

The ion product of H2O,dissociation constants of H2CO3 and pitzer parameters in the system Na+/H+/OH−/HCO 3 − /CO 3 2- /ClO 4 − /H2O at 25°C

The ion product of water and the dissociation constants of carbonic acid have been determined in 0.1, 1.0, 3.0, and 5.0M NaClO₄ at 25°C. The ion product of water K _w ^' has been evaluated by emf measurements with a combined glass electrode in NaClO₄ solutions containing 0.001–0.1M HCLO₄ or NaOH. The product K _H ^' K _l ^' K ₂ ^' of the Henry constant for CO₂ and the dissociation constants for H₂CO₃ have been determined by titration of carbonate solutions equilibrated with pCO₂ =10^–3.52 atm, and K ₂ ^' has been evaluated by potentiometric titration and by measuring the H⁺ concentration at fixed HCO ₃ ^– and CO ₃ ^2- concentrations. The ion interaction (Pitzer) equations are applied to describe the constants K _w ^' , K ₂ ^' and K _H ^' H ₁ ^' K ₂ ^' as a function of the NaClO₄ concentration. The experimental data are used to evaluate the mixing parameters _{i/ClO 4} and _{i/ClO 4} ^-/Na⁺ fori = OH ^-,HCO ₃ ^- andCO ₃ ^2-     

STUDIES ON TUNG OIL COATED REGENERATED CELLULOSE FILMS WITH WATERRESISTANCE

Regenerated cellulose films with water-resistance were obtained by an improved method ofpreparing cellulose cuoxam solution from pulps of agricultural wastes (linters, wheat straw, reedand Bamao). Experimental results showed that the mechanical properties of both the dry. and wetfilms were excellent. Data from IR, SEM and tensile strength measurements implied that thesignificant improvement of water-resistance of the films was due to the cohesion between the thinTung oil covers with hydrophobicity and the regenerated cellulose films. The films werecompletely biodegraded after being buried in soil for 100 days. The transmittance of the filmsderived from linter and reed in visible band range were 80-90%.     

Structure formation and dynamics of water in strong external electric fields

We have performed molecular dynamics computer simulations of water in homogeneous external electric fields which were varied in a wide range of field strengths. The dielectric response is found to be linear up to fields E₀≈0.01 V/Å from where dielectric saturation effects become important. At fields of E₀≈3 V/Å a phase transition into an ordered, ice-like structure is observed, which is stabilized through hydrogen-bonds. With an increasing external electric field, the frequency spectrum of the water dynamics shows a remarkable red shift of the intramolecular modes and a blue shift of the librational motions, where the frequency varies quadratically with the field strength. A simple analytical model is discussed which reproduces the observed behavior.     

A potentiometric investigation of the hydrolysis of chromate (VI) ion in NaCl media to 175°C

The hydrolysis of chromate ion was studied potentiometrically in a concentration cell fitted with hydrogen electrodes by titrating basic NaCl–Na₂CrO₄ solutions with standardized HCl against a NaOH reference solution. The temperature was varied from 25 to 175°C at 25° intervals at the following ionic strengths (I): 0.1140, 0.2346, 0.5337, 0.9988, 2.940, and 5.239 (NaCl). Depending on the ionic strength, the molality of total chromium was varied from 0.001 to 0.100. The resulting titration curves could be resolved best in terms of three equilibria involving the formation of HCrO ₄ ^– (aq), Cr₂O^3– (aq), and CrO₃Cl^– (aq). The equilibrium quotients for all three reactions were fitted as a function of temperature and ionic strength, and the molal thermodynamic parameters that were computed from these relationships are tabulated at specific ionic strengths over the experimental temperature range.     

Substituent Effects on the C-C Bond Strength, 15[1] Geminal Substituent Effects, 7[2]. Thermochemistry and Thermal Decomposition of Alkyl-substituted Tricyanomethyl Compounds

The thermolysis reactions of the tricyanomethyl compounds 10a-c were studied in solution. 2,2-Dicyano-3-methyl-3-phenylbutyronitrile ( 10a ) and 2,2-dicyano-3-methyl-3-(4-nitrophenyl)butyronitrile ( 10b ) decomposed heterolytically into carbenium ions and (CN)₃C⁻ anions, while 9-methyl-9-(tricyanomethyl)fluorene ( 10c ) underwent about 11% homolytic C-C bond cleavage into 9-methyl-9-fluorenyl- and tricyanomethyl radicals. The rates of the homolysis were determined by a radical scavenger procedure under conditions of pseudozero order kinetics. From the temperature effect on the rate constants the activation parameters were determined [ΔH ( 10c ) = 155· 2 kJ mol⁻¹, ΔS ( 10c ) = 58· 5 J mol⁻¹ K⁻¹]. Standard enthalpies of formation ΔH (g) were determined for 2,2-dicyanopropionitrile ( 2 ) (422.45 kJ mol⁻¹), 2,2-dicyanohexanenitrile ( 3 ) (349.74 kJ mol⁻¹), 2,2-dicyano-3-phenylpropionitrile ( 4 ) (540.75 kJ mol⁻¹), 2-butyl-2-methylhexanentrile ( 5 ) (-133.20 kJ mol⁻¹), 2,2-dimethylpentanenitrile ( 6 ) (-45.78 kJ mol⁻¹), and 2-methylbutyronitrile ( 7 ) (2.44 kJ mol⁻¹) from the enthalpies of combustion and enthalpies of sublimation/vaporization. From these data and known Δ (g) values for alkanenitriles and -dinitriles, thermochemical increments for ΔH (g) were derived for alkyl groups with one, two, or three cyano groups attached. The comparison of these increments with those of alkanes reveals a strong geminal destabilization, which is interpreted by dipolar repulsions between the cyano groups. - From ΔH (g) of 10c and ΔH of its homolytic decomposition the radical stabilization enthalpy for the tricyanomethyl radical 1 RSE ( 1 ) = -18 kJ mol⁻¹ was determined. Thus, 1 is destabilized, in comparison with the RSEs of tertiary α-cyanalkyl (23 kJ mol⁻¹) and α,α-dicyanoalkyl (27 kJ mol⁻¹) radicals, which were recalculated from bond homolysis measurements^[4] and the new thermochemical data. This change of RSE on increasing the number of α-cyano groups is discussed as the result of the additive contributions by resonance stabilization and increasing destabilization by dipolar repulsion. The amount of the dipolar energies was estimated by molecular mechanics (MM2).     

液膜稳定性的研究

利用单滴法对三种表面活性剂的液膜体系的稳定性进行了研究，重点考察了载体的影响，讨论了介质与表面活性剂，介质与载体，载体与表面活性剂的相互作用对液膜稳定性的影响，并根据膜强度数据，给出了液膜稳定的条件。     

Solventless injecction for packed column supercritical fluid chromatography

The adverse effects of injection solvent strength on microbore packed column SFC band broadening are demonstrated and a solventless injection system that eliminates these effects is introduced. The injection system removes solvent in a GC-like manner using a retention gap and an on-column capillary GC syringe. The analyte is delivered to the analytical column in a solvent-free plug of supercritical fluid mobile phase.     

Production of high melt strength polypropylene by gamma irradiation

High melt strength polypropylene (HMS-PP) has been recently developed and introduced in the market by the major international producers of polypropylene. Therefore, BRASKEM, the leading Brazilian PP producer, together with EMBRARAD, the leading Brazilian gamma irradiator, and the IPEN (Institute of Nuclear Energy and Research) worked to develop a national technology for the production of HMS-PP. One of the effective approaches to improve melt strength and extensibility is to add chain branches onto polypropylene backbone using gamma radiation. Branching and grafting result from the radical combinations during irradiation process. Crosslinking and main chain scission in the polymer structure are also obtained during this process. In this work, gamma irradiation technique was used to induce chemical changes in commercial polypropylene with two different monomers, Tri-allyl-isocyanurate (TAIC) and Tri-methylolpropane-trimethacrylate (TMPTMA), with concentration ranging from 1.5 to 5.0 mmol/100 g of polypropylene. These samples were irradiated with a ⁶⁰Co source at dose of 20 kGy. It used two different methods of HMS-PP processing. The crosslinking of modified polymers was studied by measuring gel content melt flow rate and rheological properties like melt strength and drawability. It was observed that the reaction method and the monomer type have influenced the properties. However, the concentration variation of monomer has no effect.