Degree of hydration in cement paste and C<Subscript>3</Subscript>A-sodium carbonate-water systems

This research provides a fundamental understanding of the early stage hydration of Portland cement paste, tricalcium aluminate (C₃A) paste at water to cement ratio of 0.5 and C₃A suspension at water to cement ratio of 5.0 modified by 2 or 4 mass% of sodium carbonate. A high conversion of unreacted clinker minerals to gel-like hydration products in the cement-Na₂CO₃ pastes takes place rapidly between 1^st to 24^th h. Contrary the Ca(OH)₂ formation within the same time interval is retarded in the excess of CO₃²⁻ ions due to intensive rise and growth of CaCO₃ crystals in hydrated cement. Later, the conversion of clinker minerals to the hydrate phase is reduced and higher contents of calcite and vaterite relative to that of Ca(OH)₂ in comparison with those found in the Portland cement paste are observed. As a consequence a decrease in strength and an increase in porosity between hardened Portland cement paste without sodium carbonate and those modified by Na₂CO₃ are observed. C₃A hydrates very quickly with sodium carbonate between 1^st and 24^th h forming hydration products rich in bound water and characterized also by complex salts of (x)C₃A·(y)CO₂·(zH₂O type, whereas C₃A-H₂O system offers C₃AH₆ as the main hydration product. Higher content of the formed calcium aluminate hydrates in C₃A-Na₂CO₃-H₂O system also contributes to early strength increase of Portland cement paste.     

Optical spectroscopy of chromium doped (CH3)2NH2X(SO4)2·6H2O (X=Al, Ga) single crystals

Chromium doped (CH₃)₂NH₂Al(SO₄)₂·6H₂O (DMAAlS) and (CH₃)₂NH₂Ga(SO₄)₂·6H₂O (DMAGaS) single crystals were grown and investigated using the methods of optical spectroscopy. It was found that the Cr³⁺ ions in the two crystals are situated in a strong crystal field in which the ²E state is the lowest. The single narrow R-line associated with the ²E–⁴A₂ phosphorescence of Cr³⁺ in DMAAlS in a ferroelectric phase indicates an undistorted octahedral site, whereas important distortion of O_h symmetry and structural disorder was inferred from spectral data obtained with DMAGaS:Cr³⁺ in a low temperature phase. Results of optical investigation are discussed taking into account the structural data.     

The dissociation quotients of formic acid in sodium chloride solutions to 200°C

The dissociation quotients of formic acid were measured potentiometrically from 25 to 200°C in NaCl solutions at ionic strengths of 0.1, 0.3 1.0, 3.0, and 5.0 mol-kg^–1. The experiments were carried out in a concentration cell with hydrogen electrodes. The resulting molal acid dissociation quotients for formic acid, as well as a set of infinite dilution literature values and a calorimetrically-determined enthalpy of reaction, were fitted by an empirical equation involving an extended Debye Hückel term and seven adjustable parameters involving functions of temperature and ionic strength. This regressional analysis yielded the following thermodynamic quantities for 25°C: logK=–3.755±0.002, H^o=–0.09±0.15 kJ-mol^–1, S^o=–72.2±0.5 J-K^–1-mol^–1, and C _p ^o =–147±4 J-K^–1-mol^–1. The isocoulombic form of the equilibrium constant is recommended for extrapolation to higher temperatures.     

基于SPCE061A单片机的髋作用力测试仪设计

介绍了基于SPCE061A单片机的髋作用力测试仪的系统结构及部分软件编写流程,着重分析了测试仪的测力方法以及使用光电编码器进行测速和鉴相的原理.测试仪以SPCE061A单片机为控制核心,配有串行通信口,具备上位机实时监控、数据保存和复现、测试数据离线分析等功能.实验证明,该测试仪具有测量准确、稳定性高及操控界面友好等优点.     

μs级负充电时不同体积分数去离子水与乙二醇混合液电性能的实验研究

 以去离子水与乙二醇的混合液（体积分数分别为36.5%,48.7%,59.0%及71.2%，以下简称混合液）作为同轴传输线的绝缘介质，进行了μs级高电压负充电条件下的正电极击穿实验，研究了混合液的击穿电压、击穿时间、相对介电常数及电阻率与体积分数的关系。实验结果表明：在充电电压为20kV时，71.2%的混合液比36.5%的混合液的平均击穿电压提高25.1%，平均击穿时间延长10.49%，而相对介电常数减小868%。同时，随着充电时间的缩短，混合液的击穿电压提高。     

Electric field‐induced birefringence,optical rotatory power and conoscopic measurements of a chiral antiferroelectric smectic liquid crystal

Using a photoelastic modulator‐based novel set‐up, the electric field‐induced in‐plane birefringence and the optical rotatory power (ORP) were measured of an antiferroelectric liquid crystalline compound (12OF1M7) in its various phases using 30 µm homeotropic cells. Some specific signatures of the in‐plane birefringence and of the ORP for the various phases are being established. A relatively small threshold field is needed for the unwinding process of the antiferroelectric phase with a unit cell of four layers [SmC_A*(1/2)] compared with that for two layers [SmC_A*(0)]. On application of the electric field on the high temperature side of the SmC_A*(1/2) phase (80.1–81.5°C), a field‐induced phase transition is shown to occur directly to the SmC* phase, whereas on the lower temperature side (79.4–80.1°C) the transition takes place to SmC* via the SmC_A*(1/3) phase. The in‐plane birefringence exhibits a critical power law dependence for the SmC*–SmA transition. The ORP changes sign within the temperature range of the phase with a unit cell of three layers, reflecting a change in the handedness during this phase. Using tilted conoscopy, the results for the biaxiality and the apparent tilt angle for a smectic liquid crystal with a tilt angle greater than 18° in the ferroelectric phase are reported. The biaxiality implies the difference in the refractive indices between the two minor axes of the refractive index ellipsoid. The optical transmittance at visible and IR wavelengths for free‐standing films reveal characteristic reflection bands for these phases. The modulated structures of the reflected bands appear just above the SmC_A* phase and below SmC_A*(1/3); these are possibly due to an easy deformation of the phase by the surfaces.     

Photosensitivity,substituent and solvent-induced shifts in UV-visible absorption bands of naphthyl-ester liquid crystals: a comparative theoretical approach

The substituent- and solvent-induced shifts in UV-visible absorption bands of naphthyl-ester nematic liquid crystals, viz., 4-octylphenyl-6-octyloxy-2-naphthoate (NAPHE1) and 6-octyloxy-2-naphthylyl-4-octyloxybenzoate (NAPHE2), have been investigated using the DFT, CNDO/S and INDO/S methods. A correlation has been made between molecular charge distribution and phase stability based on Mulliken, Loewdin, AM1, PM3, MNDO, CNDO/S and INDO/S methods. The observed π→π* and n→π* electronic transitions have been reported. The substituent- and solvent-induced shifts in absorption bands, transition energies and energy gaps have been discussed. The photosensitivity of the molecules has been analysed based on these shifts. It has been observed that the substituent has a dominant role on both absorption maxima and energy band gap, whereas the solvent has a dominant role only on absorption maxima, and no effect has been observed on the energy gap. These shifts may provide beneficial consequences in determining the end use of compounds.     

Hexaphenylditetrels – When Longer Bonds Provide Higher Stability

We present a computational analysis of hexaphenylethane derivatives with heavier tetrels comprising the central bond. In stark contrast to parent hexaphenylethane, the heavier tetrel derivatives can readily be prepared. In order to determine the origin of their apparent thermodynamic stability against dissociation as compared to the carbon case, we employed local energy decomposition analysis (LED) and symmetry-adapted perturbation theory (SAPT) at the DLPNO-CCSD(T)/def2-TZVP and sSAPT0/def2-TZVP levels of theory. We identified London dispersion (LD) interactions as the decisive factor for the molecular stability of heavier tetrel derivatives. This stability is made possible owing to the longer (than C−C) central bonds that move the phenyl groups out of the heavily repulsive regime so they can optimally benefit from LD interactions.     

Enhanced chemical reworkability of DGEBA thermosets cured with rare earth triflates using aromatic hyperbranched polyesters (HBP) and multiarm star HBP‐b‐poly(ε‐caprolactone) as modifiers

A hyperbranched aromatic polyester (HBPOH) has been synthesized, and poly(ε‐caprolactone) arms have been grown on some of its end hydroxyl groups (HBPCL). These modifiers have been used in cationic diglycidyl ether of bisphenol A formulations cured with ytterbium triflate as cationic initiator. The effect of HBPOH and HBPCL on the curing kinetics has been studied using differential scanning calorimetry (DSC). The obtained materials have been characterized by dynamomechanical analysis, DSC, thermogravimetric analysis and mechanical tests. The modifiers are incorporated into the thermosetting network because of the participation of the end hydroxyl groups in the cationic curing of epoxides by the activated monomer mechanism. Homogeneous thermosets have been obtained with a remarkable increase in impact strength without sacrificing elastic modulus or hardness. A compromise between the rigid structure of the aromatic hyperbranched core and the flexibilizing effect of the poly(ε‐caprolactone) arms is believed to be responsible for the overall thermal and mechanical properties of the materials. The use of these polymeric modifiers increases the thermal stability of the resulting materials because of the low degradability of the aromatic ester groups in the hyperbranched core and the incorporation of the modifier into the network structure. However, the presence of such ester groups makes them reworkable by hydrolysis or alcoholysis in an alkaline medium, thus opening a way for recovery of valuable substrates. Copyright © 2013 John Wiley & Sons, Ltd.     

Interlayer shear strength of single crystalline graphite

Reported values(0.2 MPa-7.0 GPa) of the interlayer shear strength(ISS) of graphite are very dispersed.The main challenge to obtain a reliable value of the ISS using conventional measuring methods was the unavailability of sufficiently large single crystalline graphite.Here we present a novel experimental method to measure the ISS,and obtain the value as ～0.14 GPa.Our result can serve as an important basis for understanding mechanical behavior of graphite or graphene-based materials.