“限时服务规则”下的复线船闸多目标调度优化

针对现有船舶过闸排队规则的欠缺,基于“限时服务规则”,构建复线船闸多目标双层优化调度模型:上层模型用于获得两个闸室安全区域的船舶排布可行方案;下层模型用于获得不同船舶排布可行方案的优化闸次数。下层模型分两个阶段完成:对符合“限时服务规则”的船舶,构建以闸次最少为目标的0-1规划模型,获得此类船舶安排的闸次;对其余船舶按照“先到先服务规则”,构建以闸次最少、闸室利用率最大为目标的多目标决策模型,获得不同船舶排布可行方案应该安排的频次。以位于江苏省干线航道上的某复线船闸某日24小时内过闸船舶的数据为例,计算结果表明:采用本文优化模型获得的优化方案与“经验编排方式”相比,两座船闸各节约2个闸次,两个船闸的平均闸室利用率分别提高了3.66和4.72个百分点。     

Event-triggered sliding mode control for switched genetic regulatory networks with persistent dwell time

This paper focus on the event-triggered sliding mode controller design for discrete-time switched genetic regulatory networks (GRNs) with persistent dwell time (PDT) switching. Firstly, the observation error dynamics of switched GRNs with PDT is constructed in the light of event-triggered sliding mode control (SMC) scheme. Next, sufficient conditions are derived to ensure the exponential stability of the augmented plant. Moreover, an event-triggered SMC law is synthesized to impel the system trajectories onto the sliding surface in a finite time. Finally, a verification example is provided to illustrate the effectiveness and potential of the proposed method.     

Design of high-speed data transfer turbo code for body channel communication transceivers

In this work, a digital differential transmitter based on low-power wireless compensation transceiver for body channel communication (BCC) is proposed. Further, the proposed transceiver is composed of Touch Status Detection Unit (TSDU), Wireless Status Compensation Unit (WSCU), and a reconfigurable preamplifier. Initially, the human body channel environment for wireless communication is investigated based on properties from 1 to 100 MHz. Further, the turbo code-based encoding scheme is used to encode the data before transferring the data on the transmitter side. Also, the proposed error-correcting parallel turbo decoder using a modified step-by-step algorithm is presented. The turbo code-based decoding scheme is used to recover the error-free transmitted data at the receiver side. Results demonstrate that the proposed BCC transceiver is designed using 90 nm CMOS technology and it is observed that the proposed BCC transceiver has utilized an area of 600mm². Also, the maximum data rate achieved by a proposed BCC transceiver was 100 Mbps, and the overall transceiver power consumption is 0.42 mW, and energy for communication is 0.02 nj/b.     

On representations of affine Kac-Moody groups and related loop groups

We demonstrate a one to one correspondence between the irreducible projective representations of an affine Kac-Moody group and those of the related loop group, which leads to the results that every non-trivial representation of an affine Kac-Moody group must have its degree greater than or equal to the rank of the group and that the equivalence appears if and only if the group is of type for some . Moreover the characteristics of the base fields for the non-trivial representations are found being always zero.

     

Blood lead monitoring in Italy: Assessment of the quality of results obtained between 1992 and 1994

Between 1992 and 1994, a new screening campaign for blood Pb monitoring in the Italian general population was carried out. Since the first campaign (started in 1978, in accomplishment of the European Community Directive 77/312/EEC) a working group of the Laboratory of Clinical Biochemistry at the Italian National Institute of Health (Istituto Superiore di Sanità), as the Reference Centre (RC), has coordinated the activity of various laboratories spread over the national territory. Appropriate quality assurance procedures, including an external quality assessment scheme (EQAS), were elaborated. Within the EQAS, three or four trials were carried out every year. Each laboratory participating in the trial analyzed eight control samples prepared from cow blood at different Pb concentrations. The results obtained by each peripheral laboratory and the RC between 1992 and 1994 have been compared by regression analysis. The same statistical method was adopted to compare the results obtained by each peripheral laboratory and the RC in the duplicate analysis of about 10 per cent of the human samples collected during the 1992–1994 monitoring campaign. There was no evidence of systematic differences between the regression lines obtained on control and human samples. In spite of the lower Pb concentration in the control samples analyzed during the 1992–1994 campaign, the analytical performance of the laboratories was better than that obtained in the previous screening campaign (1985–1986). Blood Pb levels observed in human samples collected between 1992 and 1994, confirm the downward time trend observed in the campaigns carried out in 1978–1979, 1980–1981 and 1985–1986. This study confirms that the results obtained in an EQAS are representative of the actual performance in the analysis of real (human) samples.     

A simultaneous TG–DTA study of the thermal decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester (salsalate)

Simultaneous thermogravimetry–differential thermal analysis (TG–DTA) and gas and liquid chromatography with mass spectrometry detection have been used to study the kinetics and decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester, commercially known as salsalate. Samples of salsalate were heated in the TG–DTA apparatus in an inert atmosphere (100 ml min⁻¹ nitrogen) in the temperature range 30–500 °C. The data indicated that the decomposition of salsalate is a two-stage process. The first decomposition stage (150–250 °C) had a best fit with second-order kinetics with E_a=191–198 kJ/mol. The second decomposition stage (300–400 °C) is described as a zero-order process with E_a=72–80 kJ/mol. The products of the decomposition were investigated in two ways:

(a)Salsalate was heated in a gas chromatograph at various isothermal temperatures in the range 150–280 °C, and the exit gas stream analyzed by mass spectrometry (GC–MS). This approach suggested that salsalate decomposes with the formation of salicylic acid, phenol, phenyl salicylate, and cyclic oligomers of salicylic acid di- and tri-salicylides.

(b)One gram samples of salsalate were heated in a vessel under nitrogen to 150 °C, and the residues were analyzed by liquid chromatography–mass spectrometry (LC–MS). The major compound detected was a linear tetrameric salicylate ester.

     

热致型液晶聚合物的近晶相结构研究

本文借助于不同热处理样品的WAXD研究和变温FTIR分析,从液晶态与结晶态面间距的变化,晶态、液晶态和各向同性液态下结构构象的差异出发,研究了聚合物液晶态下的近晶相结构模型。     

基于ID的一次性盲公钥

盲签名的匿名性不仅能保护个人的隐私，也同样给犯罪分子带来了可乘之机．为了解决这一问题，一些方案利用了可信中心给用户颁发的公私钥，然而，用户的不同活动可由用户的公钥及证书联系起来．为了避免这种联系，本文利用况RSA和Fiat-Shamir身份鉴别方案提出了一种简单易行的方案，只需可信中心给用户颁发一次私钥，而由用户在每次使用时根据该私钥来生成不同的公钥，从而保证了多次使用活动的不可联系性．同时在法院授权许可的情况下，可信中心可以揭示用户的身份，以防止用户的犯罪。     

一种改进混合迎风格式在翼型流场激波捕捉中的应用

波阻是飞行器超音速飞行的关键设计因素,精确捕捉激波在流场中的位置,是数值模拟含激波流场和精确计算波阻的一个重要研究内容.本文基于网格节点有限体积空间离散方法,采用AUSM格式与FVS格式的混合格式(MAUSM方法)计算对流通量,从而抑制在数值模拟流场出现的激波处振荡和过冲现象,确保AUSM准确捕获接触间断的特性和FVS格式捕捉激波的能力.本文使用MAUSM方法分别计算了在跨声速和超声速条件下的NACA0012翼型流场,并与中心差分格式的计算结果进行比较.结果表明,对于存在激波的翼型流场,MAUSM方法是有效的.     

基于微结构损伤的珠光体材料本构行为研究

珠光体材料由许多随机取向的珠光体团组成,每一珠光体团又由铁素体片和渗碳体片交替 叠合而成. 实验表明具有较小片层间距的珠光体材料具有较高的强度和寿命. 通过分析构成 珠光体团的各相及界面的损伤特征,利用损伤耗散功的概念,得到了铁素体、渗碳体与界面 损伤的具有统一形式的演化规律,将其嵌入基于细片层微结构和非经典塑性理论的珠光体团 的弹塑性本构方程,利用Hill自洽方法,得到了珠光体材料的损伤本构描述. 所得到的损 伤本构描述显含表征微结构特征的片层间距,容易证明具有较小片层间距的珠光体材料具有 较好的综合力学性能. 对珠光体材料的拉伸和循环拉压特性进行了分析,得到了与实验一 致的结果.