Structure and properties of plasma-polymerized thin films of polyaniline

Plasma polymerization of aniline and in-situ doping of polvaniline with iodine was carried out using radio frequency glow discharge. Thin films of polyaniline were deposited on platinum and glass. The infrared spectrum shows that the aromatic ring is retained under the plasma conditions. The electrical conductivity measurements indicate that the conductivity increases by more than seven orders of magnitude when the polyaniline is doped by iodine. The scanning electron microscopic studies reveal the formation of irregular pentagons on glass substrate while on platinum, polvaniline forms a fibrillar network. In both the cases a continuous film is obtained.     

Ionic Interactions of Calcium Sulfate Dihydrate in Aqueous Sodium Chloride Solutions: Solubilities,Densities, Viscosities,Electrical Conductivities,and Surface Tensions at 35 <Superscript>∘</Superscript>C

The thermodynamic, volumetric, transport, and surface properties, solubilities, densities, viscosities, electrical conductivities, and surface tensions of calcium sulfate dihydrate in aqueous sodium chloride solutions have been measured at 35 C, with a view to determine the ionic interactions that occur in these solutions. The experimental density values have been used to calculate the mean apparent molar volumes of the ternary mixtures. Viscosity values have been analyzed using different empirical equations and the experimental values of the viscosity were combined with conductivity to yield the Walden product. Molar surface energies have been computed using experimental surface tension data. The experimental data have been fitted to polynomial equations by a least-squares analysis to obtain the coefficients and their standard errors. Results have been examined in the light of structure making or structure breaking effects of the various ions present in the solutions.     

Synthesis of a model cyclic triblock terpolymer of styrene,isoprene, and methyl methacrylate

The synthesis of a model cyclic triblock terpolymer [cyclic(S‐b‐I‐b‐MMA] of styrene (S), isoprene (I), and methyl methacrylate (MMA) was achieved by the end‐to‐end intramolecular amidation reaction of the corresponding linear α,ω‐amino acid precursor [S‐b‐I‐b‐MMA] under high‐dilution conditions. The linear precursor was synthesized by the sequential anionic polymerization of S, I, and MMA with 2,2,5,5‐tetramethyl‐1‐(3‐lithiopropyl)‐1‐aza‐2,5‐disilacyclopentane as an initiator and amine generator and 4‐bromo‐1,1,1‐trimethoxybutane as a terminator and carboxylic acid generator. The separation of the unreacted linear polymer from the cyclic terpolymer was facilitated by the transformation of the unreacted species into high molecular weight polymers by the evaporation of the reaction solvent and the continuation of the reaction under high‐concentration conditions. The intermediate materials and the final cyclic terpolymer, characterized by size exclusion chromatography, vapor pressure osmometry, thin‐layer chromatography, IR and NMR spectroscopy, exhibited high molecular weight and compositional homogeneity. Dilute‐solution viscosity measurements were used as an additional proof of the cyclic structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1476–1483, 2002     

Strategies to enhance the enzymatic hydrolysis of pretreated softwood with high residual lignin content

Pretreatment of Douglas-fir by steam explosion produces a substrate containing approx 43% lignin. Two strategies were investigated for reducing the effect of this residual lignin on enzymatic hydrolysis of cellulose: mild alkali extraction and protein addition. Extraction with cold 1% NaOH reduced the lignin content by only approx 7%, but cellulose to glucose conversion was enhanced by about 30%. Before alkali extraction, addition of exogenous protein resulted in a significant improvement in cellulose hydrolysis, but this protein effect was substantially diminished after alkali treatment. Lignin appears to reduce cellulose hydrolysis by two distinct mechanisms: by forming a physical barrier that prevents enzyme access and by non-productively binding cellulolytic enzymes. Cold alkali appears to selectively remove a fraction of lignin from steam-exploded Douglas-fir with high affinity for protein. Corresponding data for mixed softwood pretreated by organosolv extraction indicates that the relative importance of the two mechanisms by which residual lignin affects hydrolysis is different according to the pre- and post-treatment method used.     

Synthesis and property of soluble poly(1,1′-dialkyl-3,3′-ferrocenylenevinylene)s via titanium-induced dicarbonyl-coupling reaction of 1,1′-dialkylferrocene-3,3′-dicarbaldehydes

1,1′-Dialkylferrocene-3,3′-dicarbaldehydes ( 1a–c ) with long alkyl chains such as ethyl, hexyl, and dodecyl groups were prepared in 13–25% yield via three-step reactions. The titanium-induced dicarbonyl-coupling reaction of 1a–c gave poly(1,1′-dialkyl-3,3′-ferrocenylenevi-nylene)s ( 2a–c ) in quantitative yields, which were the molecular weights of 3000–10,000 and highly soluble in chloroform, benzene, and hexane. The electrical conductivity and the third-order nonlinear optical susceptibility for poly(1,1′-dihexyl-3,3′-ferrocenylenevinylene) ( 2b ) were estimated to be 1 × 10^?2 S/cm on doping with iodine and 1–4 × 10^?12 esu at a wavelength of 1–2.4 μm, respectively. © 1995 John Wiley & Sons, Inc.     

Derivation of the transport equation for electrons moving through random impurities

A single (nonrelativistic, spinless) electron subject to a constant external electric field interacts with impurities located on an infinitely extended lattice by a potential of random strength. The random strength is given by a field of Gaussian random variables. We show the existence of the averaged dynamics and prove that in the weak coupling limit, 0, ₂ t= fixed, one obtains the usual transport equation for the velocity distribution.Work supported by a Max Kade Foundation fellowship.On leave of absence of the Fachbereich Physik der Universität München.     

纳米Y2O3/钴基合金激光熔覆层的组织

利用5 kW CO2激光器,在Ni基高温合金表面,熔覆纳米稀土氧化物(Y2O3)/钴基合金复合材料,制备了涂层.利用光学显微镜、扫描电镜及透射电镜分析了熔覆层的组织结构.结果表明: 熔覆层的主要相组成为γ-Co,ε-Co,Cr23C6和Y2O3;加入纳米Y2O3,凝固组织由细长的柱状树枝晶转变为较短的树枝晶;纳米Y2O3含量增大至1%时整个断面获得等轴晶组织;纳米Y2O3作为异质形核的核心,细化了组织;纳米Y2O3在熔覆层中分布不均匀,促进了γ-Co向ε-Co的转变;熔覆层的亚结构为堆跺层错.对熔覆层等轴组织形成机制进行了分析.     

Structural and Transport Properties of Mg1−xMnxMn2O4±δ Spinels

The synthesis and structural properties of Mg_1−xMn_2+xO₄, for 0≤x≤1 are described. Complete miscibility in the solid state exists for this system. For the material with the correct stoichiometry, i.e. MgMn₂O₄, the effect of temperature on the cation distribution was investigated= above 600°C the inversion degree (m) starts increasing. The electrical conductivity shows a small dependence on P(O₂) which is consistent with the small oxygen non-stoichiometry determined by means of thermogravimetry. The main contribution to the transport properties arises from the inversion equilibrium. Two distinct conductivity regimes, below and above the inversion threshold, can be assumed to explain the electrical conductivity and thermoelectric power results.     

Contributions on the Properties of Titanates with Ilmenite Structure. IV. The effect of an order-disorder transition on the high temperature electrical conductivity of NiTiO3

NiTiO₃ shows an order-disorder transition from an ordered ilmenite structure to a corundum structure at high temperatures. The transition is followed by a strong increase of the specific electrical conductivity. The conductivity was investigated as a function of temperature and oxygen activity. An order parameter according to common phase transition theories can be used to describe the behaviour of the conductivity in the transition region and vice versa. A model for the defect structure of NiTiO₃ is presented.     

Natural zeolitic material of the clinoptilolite type doped with iodine and its ions

The aim of this study was the preparation of natural zeolitic materials doped with iodine and its ions. Natural zeolite from an East Slovakian deposit was used. The content of iodine in the zeolitic products depended on the experimental conditions used for the preparation. The products and their intermediates obtained at 100, 200, 400 and 900°C were identified.