Electrical conductivity of poly(ethylene terephthalate)/expanded graphite nanocomposites prepared by in situ polymerization

Nanocomposites based on poly(ethylene terephthalate) (PET) and expanded graphite (EG) have been prepared by in situ polymerization. Morphology of the nanocomposites has been examined by electronic microscopy. The relationship between the preparation method, morphology, and electrical conductivity was studied. Electronic microscopy images reveal that the nanocomposites exhibit well dispersed graphene platelets. The incorporation of EG to the PET results in a sharp insulator‐to‐conductor transition with a percolation threshold (?_c) as low as 0.05 wt %. An electrical conductivity of 10^?3 S/cm was achieved for 0.4 wt % of EG. The low percolation threshold and relatively high electrical conductivity are attributed to the high aspect ratio, large surface area, and uniform dispersion of the EG sheets in PET matrix. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Aggregation of clay platelets in nematic liquid crystal, 5CB: microstructure,electrical conductivity and rheological investigations

The microstructure, electrical conductivity and rheological properties of a nematic liquid crystal (5CB) doped at concentrations up to 4.5 wt% of montmorillonite (MMT) or organomontmorillonite (OMMT) clay nanoplatelets, were investigated at temperatures between 293 and 310 K. Microscopy and electrical conductivity assessment revealed noticeable differences in aggregation in MMT and OMMT suspensions, MMT nanoplatelets showing a strong tendency to aggregation. The incubation of 5CB in the presence of MMT initially produced loose aggregation, followed by the formation of compact aggregates. The latter had practically no influence on the surrounding inter-aggregate regions. In the case of OMMT, a greater degree of integration of the nanoplatelets was observed within the liquid crystal structure of 5CB, resulting in a noticeable effect on electrical conductivity and activation energy of the composite material. Thixotropy was observed in suspensions of 5CB composites formed with either MMT or OMMT. A composite of 5CB with OMMT also exhibited anomalous viscous thinning at shear rates below 100 s^?1. A structural model is suggested to explain this behaviour.     

Designing nickel phthalocyanine periphery by alkyl chain via [1,3,4]-oxadiazole

Nickel phthalocyanine (NiPc, 1) periphery has been decorated by alkyl chains of varying chain length via [1,3,4]-oxadiazole moiety (NiPcs 3a–3f). All the newly synthesized compounds NiPcs 3a–3d have been completely characterized by elemental analysis, FT-IR, solid-state UV-Vis, and solid-state ¹³C NMR spectroscopy, in addition to X-ray diffraction, scanning electron microscopy, and thermal analysis. The effect of chain length in the NiPc periphery on electronic absorption and DC electrical conductivity has been investigated.     

Synthesis,characterization, corrosion inhibition of mild steel in HCl (0.5 N) solution and solid‐state electrical conductivity of new Co(II), Ni(II), Cu(II) and Zn(II) complexes

This work consists of a study of the corrosion‐inhibiting and semiconducting properties of new binuclear Co(II), Ni(II), Cu(II) and Zn(II) complexes with a Schiff base, H₂L, obtained from the 2:1 M condensation of salicylaldehyde and o‐dianisidine, respectively. Elemental, spectral and thermal analyses were used to characterize these complexes. The magnetic susceptibilities of these complexes were also determined. Weight loss, potentiodynamic polarization and scanning optical microscopy were the techniques used to investigate the efficiency of these new compounds as corrosion inhibitors. The antibacterial activity of the compounds was measured against sulfate‐reducing bacteria. It was found that inhibition occurs via the chemisorption of metal complexes on the steel surface. This absorption obeys the Langmuir adsorption isotherm model.     

DC Electrical Conductivity of the Direct Electrochemically Synthesized Polythiophene Metal Complexes

Electrochemical anodic oxidation of a metal anode in an acetone solution of 2,5-diamino-3,4-dicyanothiophene gave the polythiophene metal complexes of Co, Ni, Cu, Zn, Cd, and Sn. Chemical analyses, as well as FTIR and electronic spectral data, are presented to confirm the formulation of the isolated materials. DC electrical conductivity measurements of the polymer complexes were measured in the range 300–500 K in the annealed and 5% doped forms. The products gave electrical conductivity in the semi-conducting region that increased by heat.     

Morphological,Thermal, and Electrical Characterization of Syndiotactic Polypropylene/Multiwalled Carbon Nanotube Composites

In this work, syndiotactic polypropylene/multiwalled carbon nanotubes (MWCNT) nanocomposites, in various concentrations, were produced using melt mixing. The influence of the addition of MWCNT on the morphology, crystalline form, and the thermal and electrical properties of the polymer matrix was studied. To that aim, scanning electron microscopy, Raman spectroscopy, X-ray diffraction, differential scanning calorimetry, and dielectric relaxation spectroscopy were employed. Significant alterations of both the crystallization behavior and the thermal properties of the matrix were found on addition of the carbon nanotubes: conversion of the disordered crystalline form I to the ordered one, increase of the crystallization temperature and the degree of crystallinity, and decrease of the glass transition temperature and the heat capacity jump. Finally, the electrical percolation threshold was found between 2.5–3.0 wt.% MWCNT. For comparison purposes, the results of the system studied here are also correlated with the findings from a previous work on the isotactic polypropylene/MWCNT system.     

Responsive Gels with the Polymer Containing Alternating Naphthalene Diimide and Fluorinated Alkyl Chains: Gel Formation and Responsiveness as Well as Electrical Conductivity of Polymer Thin Films

A new electroactive polymer 1 with alternating NDI (naphthalene diimide) moieties and fluorinated alkyl chains was prepared and characterized. Gels of polymer 1 were formed in several solvents. Interestingly, gels of polymer 1 exhibited responsiveness toward N₂H₄, F^? and CN^?. Absorption and ESR spectroscopic studies revealed that such responsiveness is owing to the reduction of NDI moieties into the respective NDI^.?. In addition, thin films of polymer 1 were easily prepared with spin‐coating technique and the electrical conductivity of thin films reached 52.4 S/m after exposure to N₂H₄ vapor.     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

Crystallization kinetics of Sn40Se60 thin films for phase change memory applications

The crystallization kinetics of Sn₄₀Se₆₀ thin films has been successfully investigated using sheet resistance versus temperature measurements. Thermal evaporation was used to deposit the films on ordinary glass substrates. The crystallization temperature for Sn₄₀Se₆₀ thin film was found to be 156.6 ± 0.3 ℃. In the as-deposited state, the sheet resistance was found to be 195 MΩ, this value declined to 1560 Ω/口 upon annealing. The value of activation energy obtained from the Kissinger plot was 0.62 ± 0.07 eV. From the results obtained, Sn₄₀Se₆₀ is a promising alloy for PCM application because of its high electrical contrast, high crystallization temperature, and relatively high activation energy.