Performance of orthogonal frequency division multiplexing based M-ary quadrature amplitude modulation in asymmetrical dual-hop mixed RF-FSO transmission system

This paper investigates the performance of a dual-hop mixed relay system with radio frequency (RF) and free-space optics (FSO) communication under the effect of pointing error (PE) and atmospheric turbulence (AT). This paper considers a system where RF and FSO links are cascaded. The RF link is modeled by Nakagami-m fading, and the FSO link is modeled as gamma–gamma (G-G) fading channel. Both the channel models use orthogonal frequency division multiplexing (OFDM) with M-ary quadrature amplitude modulation (QAM). The expressions for probability density function, cumulative distribution function, signal-to-noise ratio, and ergodic capacity are derived. The moment generating function (MGF) of fading and the bit error rate (BER) of the OFDM-based M-ary QAM scheme is derived in terms of Meijer's G-function. It has been observed that, in fixed gain relay systems, the modulation scheme's BER is dominated by the SNR of the RF link. While in a variable gain relay system, the turbulence conditions of the FSO system affect the SNR and the BER of the modulation method. The feasibility of heterodyne detection and intensity modulation direct detection (IM/DD) is analyzed in terms of outage probability and ergodic capacity. The results can be used to choose the optimal modulation order and relay system for QAM-OFDM-based optical wireless systems.     

Design of high-speed data transfer turbo code for body channel communication transceivers

In this work, a digital differential transmitter based on low-power wireless compensation transceiver for body channel communication (BCC) is proposed. Further, the proposed transceiver is composed of Touch Status Detection Unit (TSDU), Wireless Status Compensation Unit (WSCU), and a reconfigurable preamplifier. Initially, the human body channel environment for wireless communication is investigated based on properties from 1 to 100 MHz. Further, the turbo code-based encoding scheme is used to encode the data before transferring the data on the transmitter side. Also, the proposed error-correcting parallel turbo decoder using a modified step-by-step algorithm is presented. The turbo code-based decoding scheme is used to recover the error-free transmitted data at the receiver side. Results demonstrate that the proposed BCC transceiver is designed using 90 nm CMOS technology and it is observed that the proposed BCC transceiver has utilized an area of 600mm². Also, the maximum data rate achieved by a proposed BCC transceiver was 100 Mbps, and the overall transceiver power consumption is 0.42 mW, and energy for communication is 0.02 nj/b.     

Short packet communication in underlay cognitive network assisted by an intelligent reflecting surface

We propose short packet communication in an underlay cognitive radio network assisted by an intelligent reflecting surface (IRS) composed of multiple reconfigurable reflectors. This scheme, called the IRS protocol, operates in only one time slot (TS) using the IRS. The IRS adjusts its phases to give zero received cumulative phase at the secondary destination, thereby enhancing the end-to-end signal-to-noise ratio. The transmitting power of the secondary source is optimized to simultaneously satisfy the multi-interference constraints, hardware limitations, and performance improvement. Simulation and analysis results of the average block error rates (BLERs) show that the performance can be enhanced by installing more reconfigurable reflectors, increasing the blocklength, lowering the number of required primary receivers, or sending fewer information bits. Moreover, the proposed IRS protocol always outperforms underlay relaying protocols using two TSs for data transmission, and achieves the best average BLER at identical transmission distances between the secondary source and secondary destination. The theoretical analyses are confirmed by Monte Carlo simulations.     

BP神经网络结合变量选择方法在牛奶蛋白质含量检测中的应用北大核心CSCD

牛奶中的蛋白质含量会影响牛奶的品质,利用高光谱图像的光谱特征信息研究对牛奶蛋白质含量预测的可行性。本文提出一种基于竞争性自适应重加权算法(competitive adaptive reweighted sampling, CARS)和连续投影算法(successive projections algorithm, SPA)结合多层前馈神经网络(back propagation, BP)的预测建模方法,实验以含有不同浓度蛋白质的牛奶为对象,利用可见光/近红外高光谱成像系统共采集到5种牛奶共计250组高光谱数据,通过实验对比选择采用标准化方法对获取到的吸收光谱预处理,然后采用CARS结合SPA筛选特征波长,得到18个特征波长,建立CARS-SPA-BP模型,经过试验,CARS-SPA-BP模型的训练集决定系数和测试集决定系数R;和R;分别达到0.971和0.968,训练集均方根误差(root mean square error of calibration,RMSEC)和测试集均方根误差(root mean square error of prediction,RMSEP)达到了0.033和0.034。研究发现,采用CARS结合SPA筛选的牛奶特征波长建立的多层前馈神经网络模型,其模型预测结果与全波长建模相比并没有明显降低,因此将CARS结合SPA用于波长筛选并且结合BP神经网络基本可以完成对牛奶蛋白质含量的预测。为验证CARS-SPA-BP模型的预测能力,在相同数据环境下,使用较为传统的偏最小二乘回归(partial least squares regression, PLSR)进行建模,实验结果表明,CARS-SPA-BP相较于PLSR,R;和RMSEP均有明显提升。研究表明,CARS-SPA-BP可充分利用牛奶光谱特征信息实现较高精度的牛奶蛋白质含量检测。     

位置敏感探测器光斑脱靶误差补偿方法研究

为了提高位置敏感探测器(PSD)的位置检测范围,解决光斑在探测器光敏面脱靶时无法准确定位光斑的问题,提出一种光斑脱靶误差补偿方法,分析了脱靶前后PSD检测光斑能量重心变化规律,建立了PSD光强信号与位置检测误差间的函数关系。实验结果表明:当PSD光敏面尺寸为12mm×12mm时,对于半径为5mm的高斯光斑,通过所提出的光斑补偿方案补偿后PSD的X轴检测范围提高了66.7%,位置检测平均相对误差不超过5%,该方法对提高PSD位置检测性能具有重要的意义。     

基于Pandora 观测的OMI 全球臭氧产品精度验证

臭氧是大气中一种重要的微量气体, 是影响对流层与平流层大气运动的重要成分之一, 臭氧的高精度探测 对于环境和气候具有重要的意义。OMI 传感器是目前具备探测全球臭氧含量的主要遥感传感器之一。利用地基 Pandora 观测网全球范围内44 个臭氧观测站点数据对OMI 卫星数据产品进行了精度验证。结果表明: OMI 臭氧产品 与Pandora 地基测量结果之间具有很好的线性相关性, 相关系数达到0.948, 但精度结果存在区域差异。在南半球地区, 相关系数为0.915; 在北半球低纬度地区, 其相关系数为0.932, 中纬度地区相关系数为0.948, 而在高纬度地区, 相关系 数达到了0.957。此外, 验证精度还与臭氧柱总量存在相关性, 在臭氧柱总量低于220 Du (对应臭氧空洞条件) 时, OMI 卫星产品存在高估现象, 高估约13%; 而在臭氧柱总量高于400 Du 时, OMI 的臭氧产品低于Pandora 地基测量结果, 且 随着臭氧柱总量增加, 低估情况也越严重, 在臭氧柱总量达到500 Du 时, OMI 臭氧产品低估约4%。     

基于结构诱导人工表面等离激元的宽带低耦合电路北大核心CSCD

实现超宽带传输和超高集成度设计是微波和太赫兹电路发展的终极目标。针对以上目标,本文提出了结构诱导人工表面等离激元的概念。基于此设计并验证了具有超高局附性和超小传输常数的结构诱导人工表面等离激元电路结构,打破了传统人工表面等离激元电路对传输常数和衰减常数的限制。理论分析和数值验证表明,相较于经典人工表面等离激元,具备优异的场局附性和传输特性的结构诱导人工表面等离激元具有明显的弱色散和低耦合特性,在电路设计中可以有效减少宽带信号传输的色散失真,同时提高布线密度。     

A priori error estimates for numerical methods for scalar conservation laws. Part I: The general approach

In this paper, we construct a general theory of a priori error estimates for scalar conservation laws by suitably modifying the original Kuznetsov approximation theory. As a first application of this general technique, we show that error estimates for conservation laws can be obtained without having to use explicitly any regularity properties of the approximate solution. Thus, we obtain optimal error estimates for the Engquist-Osher scheme without using the fact (i) that the solution is uniformly bounded, (ii) that the scheme is total variation diminishing, and (iii) that the discrete semigroup associated with the scheme has the -contraction property, which guarantees an upper bound for the modulus of continuity in time of the approximate solution.

     

Optimal error estimates of a locally one-dimensional method for the multidimensional heat equation

For the multidimensional heat equation in a parallelepiped, optimal error estimates inL ₂(Q) are derived. The error is of the order of +¦h¦² for any right-hand sidef L ₂(Q) and any initial function ; for appropriate classes of less regularf andu ₀, the error is of the order of ((+¦h¦² ), 1/2<1.Translated fromMatematicheskie Zametki, Vol. 60, No. 2, pp. 185–197, August, 1996.     

Error estimation in peak‐shape analysis of XPS core‐level spectra using UNIFIT 2003: how significant are the results of peak fits?

An error analysis for numerically evaluating random uncertainties in x‐ray photoelectron spectroscopy has been implemented in version 2003 of the spectra treatment and analysis software UNIFIT in order to improve the understanding of the statistical basis and the reliability of the model parameters for photoelectron spectra. The theoretical basis as well as two approaches to obtain error limits of the fit parameters have been considered. Several test spectra have been analysed and discussed. A representative example has been chosen to demonstrate the relevance of the error estimation for practical surface analysis. Suggestions for the minimization of errors in the peak‐fitting procedures are presented. Copyright © 2004 John Wiley & Sons, Ltd.