荧光光谱结合表面增强拉曼光谱法研究紫檀芪与人血清白蛋白相互作用

在模拟人体生理条件下,应用荧光光谱和表面增强拉曼光谱法研究了紫檀芪(PTE)与人血清白蛋白(HSA)之间相互作用机制.结果表明,HSA的荧光能被PTE静态猝灭,并伴随有非辐射能量转移作用,两者形成了1:1复合物,结合距离r=1.495 nm,结合常数KA=1.12×104(298 K)、4.07×104(304 K)和2.45×105 L/mol(310 K).表面增强拉曼光谱研究揭示,PTE分子通过甲氧基与HSA进行结合;热力学数据表明,二者间的作用主要为疏水作用;标记竞争实验指出PTE优先结合HSA的位点Ⅲ.三维荧光光谱、同步荧光光谱和表面增强拉曼光谱结果显示,与PTE作用后,HSA构象发生变化,导致色氨酸残基周围环境疏水性降低,但对PTE分子构象影响不大.     

纳米Ag/TiO_(2)纳米管阵列基底构建及表面增强拉曼散射光谱检测与降解盐酸四环素北大核心CSCD

将阳极氧化与光还原法结合,在TiO_(2)纳米管阵列(TiO_(2)NTAs)表面修饰Ag纳米粒子,获得一种均匀有序、稳定性高且可循环的TiO_(2)NTAs/Ag活性基底。采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)、表面增强拉曼散射光谱(SERS)和扫描电子显微镜(SEM)等手段对TiO_(2)NTAs/Ag的组成和结构进行了表征。进一步研究了该TiO_(2)-NTAs/Ag阵列对盐酸四环素(TC-HCl)的SERS响应,结果表明,该复合基底对TC-HCl具有较高的检测灵敏度,在水中检测限可达1×10^(−14) mol/L,而TiO_(2)-NTAs与Ag之间的协同效应对其检测性能的提高起着关键作用。此外,TiO_(2)NTAs/Ag基底在光照下对TC-HCl展示了优异的降解活性,且至少可循环使用8次。表明该TiO_(2)NTAs/Ag基底在环境中有机污染物的SERS检测和降解领域具有潜在的应用前景。     

SrTiO3/α-Fe2O3异质结光阳极光电转换性能

作为一类重要的光电极材料,α-Fe2O3在太阳能转化方面有着潜在的应用前景.但是,光生电子空穴对的再复合导致α-Fe2O3的光电量子产率很低.为了抑制光生电子空穴对的再复合,提高α-Fe2O3的光电量子产率,采用Spin-coating方法在透明导电玻璃FTO(SnO2:F)衬底上制备了SrTiO3/α-Fe2O3异质结薄膜光电极,并对该光电极进行了XRD、SEM、紫外-可见透射光谱的表征.在三电极光电化学测试系统中对薄膜的光电流-电压特性、入射光子电流转化效率(Incident photon to current efficiency,IPCE)对波长的依赖性进行了表征.在相同的Xe灯照射条件下,SrTiO3/α-Fe2O3异质结光电极的光电流及IPCE值大于单一的SrTiO3、α-Fe2O3各自的光电流及IPCE值,这与理论预测的结论一致.     

Molecular Simulation on Competitive Adsorption Differences of Gas with Different Pore Sizes in Coal

Micropores are the primary sites for methane occurrence in coal. Studying the regularity of methane occurrence in micropores is significant for targeted displacement and other yield-increasing measures in the future. This study used simplified graphene sheets as pore walls to construct coal-structural models with pore sizes of 1 nm, 2 nm, and 4 nm. Based on the Grand Canonical Monte Carlo (GCMC) and molecular dynamics theory, we simulated the adsorption characteristics of methane in pores of different sizes. The results showed that the adsorption capacity was positively correlated with the pore size for pure gas adsorption. The adsorption capacity increased with pressure and pore size for competitive adsorption of binary mixtures in pores. As the average isosteric heat decreased, the interaction between the gas and the pore wall weakened, and the desorption amount of CH₄ decreased. In ultramicropores, the high concentration of CO₂ (50–70%) is more conducive to CH₄ desorption; however, when the CO₂ concentration is greater than 70%, the corresponding CH₄ adsorption amount is meager, and the selected adsorption coefficient S_CO2/CH4 is small. Therefore, to achieve effective desorption of methane in coal micropores, relatively low pressure (4–6 MPa) and a relatively low CO₂ concentration (50–70%) should be selected in the process of increasing methane production by CO₂ injection in later stages. These research results provide theoretical support for gas injection to promote CH₄ desorption in coal pores and to increase yield.     

基于密度泛函的伪麻黄碱拉曼光谱性质研究

研究伪麻黄碱的拉曼光谱和吸附在纳米银基底上的表面增强拉曼光谱(SERS),利用密度泛函理论B3LYP/6-311G++(d, p)方法对伪麻黄碱分子进行了计算,得到了分子构型信息和理论拉曼光谱,用Gaussview软件对分子振动模式进行了全面的归属,在伪麻黄碱的表面增强拉曼光谱中,采用了自组装方法获得了团簇银纳米表面增强基底,实现了很好的增强效应.实验结果表明：伪麻黄碱的拉曼光谱计算结果和实验结果基本一致,理论计算为伪麻黄碱分子振动峰位的归属提供了重要的依据,伪麻黄碱分子与银纳米表面化学吸附,苯环垂直于纳米基底表面,研究结果为伪麻黄碱的拉曼光谱检验分析提供了理论依据,也为苯丙胺类毒品的光谱分析研究提供了参考.     

苯硫酚吸附在新型Ag-Au合金纳米粒子上的表面增强拉曼光谱研究

以柠檬酸钠同时还原制备的Ag-Au合金纳米粒子为种子,用盐酸羟胺进一步使其生长得到粒径为40～60 nm的新型Ag-Au合金纳米粒子,采用UV-Vis光谱和TEM对纳米种子和再生长后的纳米粒子分别进行表征。两种粒子的UV-Vis光谱均只观察到一个等离子体共振峰,其频率随金的摩尔分数(x_Au)增加而红移,且TEM图像表明这两种粒子的颜色均一,因此判断这两种粒子均为合金结构。以苯硫酚为探针分子,研究了该新型合金纳米粒子的表面增强拉曼光谱(SERS),结果表明吸附了苯硫酚的合金纳米粒子的紫外最大吸收峰红移,并在近红外区出现聚集体的吸收峰。在632.8 nm波长激发下,由于表面等离子体共振效应Au上的SERS信号最强,而合金纳米粒子上的SERS信号随x_Au增大而增强。     

胶束体系中曲克芦丁的荧光特性及其分析应用

对曲克芦丁在胶束体系中的荧光性质进行了研究。实验发现在NaAc-HAc缓冲体系中,曲克芦丁自身具有较弱的内源性荧光,加入适量的表面活性剂十二烷基苯磺酸钠-6(SDBS-6),可使曲克芦丁与SDBS-6形成胶束配合物,体系微环境发生改变,使荧光发射强度显著增强,荧光增强程度与曲克芦丁的含量在一定范围内呈良好的线性关系。据此提出了基于SDBS-6增敏胶束荧光光谱法测定微量曲克芦丁的新方法。对测定条件进行了详细研究,结果表明： 在pH 5.53的NaAc-HAc缓冲体系中,当最大激发波长λex=350.0 nm,最大发射波长λ_em=456.3 nm时,方法线性范围为1.6×10-6 mol·L-1～8.0×10-10 mol·L-1,检出限1.1×10-10 mol·L-1,相对标准偏差为1.7%(n=11,c=6.0×10-7 mol·L-1)。方法用于片剂和注射液中曲克芦丁的测定,回收率为98.5%～100.4%,结果令人满意。     

Enhanced multi‐objective optimization of a dimpled channel through evolutionary algorithms and multiple surrogate methods

Using a multi‐objective evolutionary algorithm (MOEA) and enhanced surrogate approximations, the present study demonstrates the numerical analysis and optimization of staggered‐dimple channels. Two surrogates, the response surface approximation (RSA) model and the Kriging (KRG) model, are applied in light of the surrogate fidelity of the approximate analysis. An enhanced Pareto‐optimal front is obtained by performing local resampling of the Pareto‐optimal front, which provides relatively more accurate Pareto‐optimal solutions in the design space for each surrogate model. Three dimensionless design variables are selected, which are related to geometric parameters, namely, the channel height, dimple print diameter, dimple spacing, and dimple depth. Two objective functions are selected that are related to the heat transfer and pressure loss, respectively. The objective‐function values are numerically evaluated through Reynolds‐averaged Navier–Stokes analysis at the design points that are selected through the Latin hypercube sampling method. Using these numerical simulations two surrogates, viz, the RSA and Kriging models, are constructed for each objective function and a hybrid MOEA is applied to obtain the Pareto‐optimal front. For the particular implementation of surrogate models, it is observed that Pareto‐optimal predictions of the RSA model are better than those of the KRG model, whereas the KRG model predicts equally well at the off‐Pareto‐region (region away from the Pareto‐optimal solutions), which is not the case with the RSA model. The local resampling of the Pareto‐optimal front increases the fidelity of the approximate solutions near the Pareto‐optimal region. The ratios of the channel height to the dimple print diameter and of the dimple print diameter to the dimple pitch are found to be more sensitive along the Pareto‐optimal front than the ratio of the dimple depth to the print diameter. The decrease of the ratio of the channel height to the dimple diameter and the increase of the ratio of the dimple print diameter to the pitch lead to greater heat transfer at the expense of the pressure loss, whereas the ratio of the dimple depth to the print diameter is rather insensitive to Pareto‐optimal solutions. Pareto‐optimal solutions at higher values of the Nusselt number are associated with higher values of the pressure loss due to the increased recirculation, mixing of fluid and vorticity generation. Copyright © 2010 John Wiley & Sons, Ltd.     

pH Dependence of Surface Enhanced FT-Raman Scattering of Ω-Mercaptoalkanols on Silver Surface

Fourier transform surface enhanced Raman spectrometer is used to characterize Ω-mercaptoalkanols (HO(CH₂)_nSH, n=2, 6) chemisorption on silver surface from their aqueous solution of different pH values.