Photonic crystals--a step towards integrated circuits for photonics.

The field of photonic crystals has, over the past few years, received dramatically increased attention. Photonic crystals are artificially engineered structures that exhibit a periodic variation in one, two, or three dimensions of the dielectric constant, with a period of the order of the pertinent light wavelength. Such structures in three dimensions should exhibit properties similar to solid-state electronic crystals, such as bandgaps, in other words wavelength regions where light cannot propagate in any direction. By introducing defects into the periodic arrangement, the photonic crystals exhibit properties analogous to those of solid-state crystals. The basic feature of a photonic bandgap was indeed experimentally demonstrated in the beginning of the 1990s, and sparked a large interest in, and in many ways revitalized, photonics research. There are several reasons for this attention. One is that photonic crystals, in their own right, offer a proliferation of challenging research tasks, involving a multitude of disciplines, such as electromagnetic theory, nanofabrication, semi-conductor technology, materials science, biotechnology, to name a few. Another reason is given by the somewhat more down-to-earth expectations that photonics crystals will create unique opportunities for novel devices and applications, and contribute to solving some of the issues that have plagued photonics such as large physical sizes, comparatively low functionality, and high costs. Herein, we will treat some basics of photonic crystal structures and discuss the state-of-the-art in fabrication as well give some examples of devices with unique properties, due to the use of photonic crystals. We will also point out some of the problems that still remain to be solved, and give a view on where photonic crystals currently stand.     

The <Emphasis Type="Italic">M</Emphasis>/<Emphasis Type="Italic">G</Emphasis>/∞ system revisited: finiteness,summability, long range dependence,and reverse engineering

We explore M/G/∞ systems ‘fed’ by Poissonian inflows with infinite arrival rates. Three processes – corresponding to the system's state, workload, and queue-size – are studied and analyzed. Closed form formulae characterizing the system's stationary structure and correlation structure are derived. And, the issues of queue finiteness, workload summability, and Long Range Dependence are investigated. We then turn to devise a ‘reverse engineering’ scheme for the design of the system's correlation structure. Namely: how to construct an M/G/∞ system with a pre-desired ‘target’ workload/queue auto-covariance function. The ‘reverse engineering’ scheme is applied to various examples, including ones with infinite queues and non-summable workloads. AMS Subject Classifications Primary: 60K25; Secondary: 60G55, 60G10     

Least-Squares Fitting of Algebraic Spline Surfaces

We present an algorithm for fitting implicitly defined algebraic spline surfaces to given scattered data. By simultaneously approximating points and associated normal vectors, we obtain a method which is computationally simple, as the result is obtained by solving a system of linear equations. In addition, the result is geometrically invariant, as no artificial normalization is introduced. The potential applications of the algorithm include the reconstruction of free-form surfaces in reverse engineering. The paper also addresses the generation of exact error bounds, directly from the coefficients of the implicit representation.     

资源共享方式若干问题的研讨

社会公用服务系统和工程技术系统，存在共同的资源共享问题。本文通过典例就资源共享方式的若干问题加以探究：讨论广义的多用户系统中人工资源共享方式的分类；阐述常用的共享方式的特点、优缺点；分析系统时间性能及其改进与共享方式的关系等。文章还提出在系统工程范畴里，应对社会公用服务和工程技术两类系统的资源共享方式予以综合研究，并相互借鉴和移植。     

双光子Jaynes－Cummings模型的亚泊松光子统计特性研究

本文利用量子电动力学理论和缀饰原于方法，对双光子Ｊａｍｅｓ－Ｃｕｍｍｉｎｇｓ模型中单模激光场的稳态亚泊松光子统计性质进行了系统研究。结果表明：激光上能级相对泵浦参量Ｘａ具有一个确定的阈值Ｘａｔ；当Ｘａ＞Ｘａｔ时，光场呈现亚泊松光子统计；而当Ｘａ＞＞Ｘａｔ时，光场将呈现出深度且完全恒定的亚泊松光子统计。     

The elimination of fast variables in complex chemical reactions. III. Mesoscopic level (irreducible case)

The master equation for a complex chemical reaction cannot always be reduced to a simpler master equation, even if there are fast and slow individual reaction steps. Nevertheless the elimination of intermediates can be carried out with the help of the-expansion. This is illustrated with a well-known complex reaction: the dissociation of N₂O₅. It is shown that the intrinsic fluctuations in the N₂O₅ decay are larger than those implied by the master equation suggested by the macroscopic rate law.     

Design considerations and an example of application of an in-house made TG-MS interface

The design, the abilities and a characteristic application of an in-house made interface for combining thermogravimetry (TG) with mass spectrometry (MS) are presented. The TG-MS interface consists mainly of three co-axial tubes. The position of the intermediate tube was determined after calculation of the temperature profile at the TG furnace exit tube. The inner tube position was determined taking into consideration its protection against condensation of heavy molecules and the time delay for the transfer of the evolved gases. This interface allows either continuous sampling and transferring of the evolved gases from the TG to the MS or repetitive introduction of short sampling pulses of TG evolved gases to MS. The interface is capable of coupling various commercial instruments. In the present work two configurations of this interface are demonstrated. Finally an example of application of this interface on forest fuel pyrolysis is presented. This revised version was published online in July 2006 with corrections to the Cover Date.     

Genetic engineering to enhance the selectivity of protein separations

The ability to recover and purify natural and recombinant proteins, and the costs of doing so remain a major task in introducing the potential products of biotechnology. The bases for separation range from specific binding onto tailored reagents to solubility and partitioning behavior governed by a mixed bag of size, charge, and hydrophobicity. In most cases, a combination of methods is used in sequence, and improvements in the selectivity at an early stage can enhance the effectiveness of subsequent (and usually more costly) steps. Genetic engineering provides a means of improving the selectivity within the context of existing separation methods. By this strategy, improvements in selectivity are sought by bestowing a distinctive property on the protein of interest. The primary sequence of amino acids is altered, such that the protein can be selectively removed from other components of the multicomponent mixture in which such products are commonly found. In this article, the range of these “distinctive properties” and their pairing with various separation methods will be reviewed. Specific examples from our work, in which a distinctive charge is provided via a polypeptide “purification” fusion tail, will be discussed. Separation methods we have used with these fusion proteins are precipitation, two-phase aqueous extraction, reversed micellar extraction, and ion exchange using both resins and membranes.     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.