基于二噻吩并吡咯π桥的窄带隙非富勒烯受体材料在有机太阳能电池中的应用

以不同烷基取代的二噻吩并吡咯(DTP)为π桥,连接吲哒省并二噻吩(IDT)中间单元和氰基茚酮(IC)或二氟代氰基茚酮(2F-IC)末端基团,设计并合成了6个窄带隙的非富勒烯受体材料。 其中,IDTDTP-C₂C₂-H和IDTDTP-C₂C₂-F中的DTP单元以1-乙基丙基为侧链,IDTDTP-C₆C₆-H和IDTDTP-C₆C₆-F中的DTP单元以1-己基庚基为侧链,IDTDTP-C₁₂-H和IDTDTP-C₁₂-F中的DTP单元以十二烷基为侧链。 6个分子均具有较窄的光学带隙(1.37~1.44 eV)。 相比于以IC为末端基团的分子(IDTDTP-C₂C₂-H、IDTDTP-C₆C₆-H和IDTDTP-C₁₂-H),由于氟原子的拉电子效应,以2F-IC为末端基团的分子(IDTDTP-C₂C₂-F、IDTDTP-C₆C₆-F和IDTDTP-C₁₂-F)具有红移的吸收光谱,以及更低的最高分子占有轨道能级(HOMO)和最低分子空轨道(LUMO)能级。 以宽带隙聚合物聚[2,6-(4,8-双(5-(2-乙基己基))噻吩-2-基)-苯并[1,2-b:4,5-b']二噻吩-alt-5,5-(1',3'-二-2-噻吩)-5',7'-双(2-乙基己基)-苯并[1',2'-c:4',5'-c']二噻吩-4,8-二酮](PBDB-T)为给体材料,制备了有机太阳能电池器件。 PBDB-T:IDTDTP-C₆C₆-F共混薄膜具有较高且更平衡的空穴/电子迁移率,以及良好的形貌,基于PBDB-T:IDTDTP-C₆C₆-F的有机太阳能电池获得了6.94%的能量转换效率,开路电压为0.86 V,短路电流密度为13.56 mA/cm²,填充因子为59.5%。     

New practical tools for the implementation and use of ultrafast 2D NMR experiments

Ultrafast (UF) 2D NMR is a very promising methodology enabling the acquisition of 2D spectra in a single scan. In the last few years, the analytical performance of UF 2D NMR has been highly increased, consequently maximizing its range of applications. However, its implementation and use by non‐specialists are far from being straightforward, because of the specific acquisition and processing procedures and parameters characterizing UF NMR. To make this methodology implementable and applicable by non‐specialists, we developed a simple routine capable of translating conventional parameters (spectral widths and transmitter frequencies) into specific UF parameters (gradient and chirp pulse parameters). This macro was subsequently implemented in a Web page, which is available for external users. Although the algorithm was designed for two widely used 2D experiments, COSY and HSQC, it can easily be extended to any other pulse sequence. The robustness of this routine was verified successfully on a variety of small molecules. We believe that this tool will eliminate much of the technical difficulties related to UF 2D NMR and will make the technique accessible to a wider audience of organic and analytical chemists. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and photovoltaic properties of main chain polymeric metal complexes containing 1,10‐phenanthroline metal complexes conjugating alkyl fluorene or alkoxy benzene by C═C bridge for dye‐sensitized solar cells

Four main chain polymeric metal complexes (P1–P4) based on 1,10‐phenanthroline metal complexes via the Heck coupling have been synthesized and characterized by Fourier transform infrared spectroscopy, ¹H NMR, UV–Vis absorption, photoluminescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, elemental analysis, and cyclic voltammetry. To investigate their photovoltaic properties, the dye‐sensitized solar cells based on these polymers dyes are studied, under the illumination of AM 1.5G, 100 mW/cm². The study results show the four polymers exhibit good thermally stable and the solar cells based on them have good device performance, and the maximum power conversion efficiency is up to 0.735% for the solar cells based on P3 with a short‐circuit current (J_sc) of 1.68 mA/cm² and an open‐circuit voltage (V_oc) of 0.62 V. Copyright © 2012 John Wiley & Sons, Ltd.     

Comparison of sample preparation methods combined with gas chromatography with electron‐capture detection for the analysis of multipesticide residues in lotus seeds

Sample preparation is always the major bottleneck in analytical chemistry for the determination of pesticide residues. Different sample preparation methods have been proposed due to the wide variety of pesticides used and the inherent complexity of the matrices. In this study, different sample preparation methods including SPE, matrix solid‐phase dispersion, the quick, easy, cheap, efficient, rugged, and safe method, and a one‐step completion method were compared and evaluated for extracting pesticides from lotus seeds. Analysis was carried out using GC with electron‐capture detection. The results showed that good recoveries for tested pesticides were obtained by using Florisil in the four methods, and the extraction efficiency of the one‐step completion method was superior to the other three methods. The one‐step completion method was confirmed to have good linearity, reproducibility, stability, and recovery for the detection of 36 pesticides in lotus seed samples. The data collected from this study are expected to prove useful in regulating the concentration of the residues in lotus seeds, as well as in protecting human health from the hazards posed by these residues.     

Antibacterial and Antifungal Activities—Surface Active Properties Relation of Novel Dischiff Base Cationic Gemini Amphiphiles Bearing Homogeneous Hydrophobes

A novel series of cationic Gemini amphiphiles containing Dischiff base species were synthesized and their chemical structures were determined using different analytical tools. Their surface properties were determined using surface tension measurements. The adsorption and micellization thermodynamic parameters were calculated using Gibb's equations at 25°C. The surface parameters were also determined including critical micelle concentration, effectiveness, efficiency, maximum surface excess, minimum surface area, interfacial tension, and emulsification power. The synthesized cationic Gemini surfactants were evaluated as bactericides for gram negative and gram positive bacteria and also against sulfur reducing bacteria (SRB). The results of the cytotoxicity of the synthesized compounds against the targeted bacterial strains were promising and completely dependent on the surface activity of these compounds.     

Temperature Effect on the Phase Behavior of the Systems Water/Sucrose Laurate/Ethoxylated‐mono‐di‐glyceride/Oil

The phase behavior of the systems water/sucrose laurate/ethoxylated mono‐di‐glyceride/oil was investigated as function of temperature and the weight ratio of EMDG in the mixed surfactants. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. This study demonstrates that the phase inversion temperature (PIT) decreases and the efficiency of the mixed surfactants (γ¯) increase as the weight ratio of the EMDG in the mixed surfactants increases. R (+)‐limonene gave lower phase inversion temperatures and higher efficiencies compared to isopropylmyristate, and caprylic‐capric triglyceride. The solubilization capacity of the system water/sucrose laurate/oil increased upon the addition of ethoxylated mono‐di‐ glyceride which stabilize the surfactant layer and increase the interfacial area.     

A new type of two-dimensional packed + capillary column GC system. I. Theory

Summary To match the need of high efficiency capillary column (plate number N₂, Plate height H₂ and carrier gas linear velocity U₂), a new high efficiency packed column (N₁, H₁ and U₁) at high carrier gas velocity with small capacity factor has been developed in the light of theoretical discussion of factors effecting the column efficiency utilization ratio.     

An investigation of heparinase immobilization

A systematic investigation of the parameters that affect the efficiency of immobilizing heparinase onto cyanogen bromide activated crosslinked 8% agarose beads was conducted. Two experimental measures, the “fraction bound” and the “fraction retained,” were used to monitor the coupling efficiency. The fraction bound is the portion of the total initial enzyme that is bound to the agarose gel. The fraction retained is the fraction of bound enzyme that is active. The product of the two measures indicates the coupling efficiency. The activity of the immobilized heparinase was measured under conditions free of both internal and external mass transfer limitations, and thus, the fraction retained represents the true immobilized enzyme activity. Increasing the degree of activation of the beads results in an increase in the fraction bound, the fraction retained, and consequently, the coupling efficiency. As the ratio of enzyme solution to gel volume increases from 1.5 to 2.2, the fraction bound remains constant but the fraction retained decreases (heparinase concentration; 0.15 mg/mL and degree of activation; 9.5 μmol of cyanate esters/g of gel). At volume ratios greater than 2.2, both the fraction bound and the fraction retained decline continuously. Changing the heparinase concentration in the coupling solution changes the coupling efficiency in a manner similar to that of the volume ratio change. When heparin is added during the coupling process, the fraction bound declines as the heparin concentration increases, whereas the fraction retained increases up to a heparin concentration of 12 mg/mL and decreases thereafter. When arginine, lysine, and glycine are used to block the unreacted cyanate ester groups after the coupling process, the immobilized heparinase shows different pH optima of 6.5, 6.9, and 7.2, respectively. Based upon these findings, a protocol to optimize heparinase immobilization is developed.     

Synthesis of polyaspartic acid-glycidyl adduct and evaluation of its scale inhibition performance and corrosion inhibition capacity for Q235 steel applications

In this work, the development of the eco-friendly comprehensive scale and corrosion inhibitor based on green polyaspartic acid (PASP) was presented. In this view, PASPG was prepared by a ring-opening graft modification reaction of polysuccinimide (PSI) with glycidyl. In addition, the molecular structure and the thermal stability of PASPG were characterized by using three different methods (FTIR, ¹H NMR, and TGA). PASPG’s scale inhibition efficiency and corrosion inhibition efficiency were also evaluated, respectively. More concretely, the scale inhibition efficiency of PASPG achieved 94.6 % and 95.1 % for CaCO₃ and CaSO₄, respectively. With the aid of the FTIR and SEM measurement techniques, it was found that PASPG could induce the irregular growth of the CaCO₃ and CaSO₄ morphology and destroy the formation of crystals. On the other hand, the higher corrosion efficiency of 85.17 % was achieved by PASPG in comparison with PASP (72.53 %). PASPG is a mixed inhibitor and the adsorption of PASPG on the Q235 steel surface followed the Langmuir mono-layer adsorption isotherm. The formation of a protective film on the surface of carbon steel was proved by PASPG’s adsorption, which increased the resistance to be eroded. Thus, the surface of carbon steel can be effectively protected. The present work provides a simple and effective pathway for the synthesis of high-efficiency green scale and corrosion inhibitor, by introducing a functional group into the PASP chains. The implementation of such type of chemical modification method may also be an effective strategy for improving the efficiency of other polymers green scale and corrosion inhibitors.     

高效率钙钛矿发光二极管的研究进展

钙钛矿发光二极管(LED)由于高的发光色纯度、颜色连续可调、可溶液法制备和材料成本低等优势,被认为是下一代高清柔性显示和平面照明应用最有前景的候选材料之一,受到科学界和产业界的广泛关注。在过去的几年里,钙钛矿LED取得了快速的发展,发光颜色已经实现了从紫外光到近红外光的全覆盖,其中绿光、红光和近红外光的外量子效率均超过了20%。本文首先介绍了钙钛矿LED的基本知识,随后综述了本课题组近年来在高效率钙钛矿LED制备方面取得的研究进展,最后结合领域内的一些代表性工作,分析了领域发展中存在的不足,并对未来产业化应用的前景进行了展望。