聚合物微腔的研制及其特性分析

采用ＢＭＰＰＶ：ＰＶＫ的混合物作国源介质，将其按一定比例溶于氯仿中，并旋涂在具有９９．５％的反射率的ＤＢＲ上，其上蒸发３００ｎｍ的银膜，形成了面发射型微腔结构，其中ＤＢＲ在入射腔面，银膜为反射腔面，在激发波长３３７．１ｎｍ，频率２０Ｈｚ脉宽１０ｎｓ的氮分子激光器泵浦下，光谱明显等窄化，出现４６０ｎｍ和５３０ｎｍ两个比较强的发光峰，主峰国４６０ｎｍ半宽度为７ｎｍ。     

ⅡB族同核准分子Hg2226.2nm漫射带研究

本文报导在高纯Ｈｇ蒸气石英放电管中首次观测到峰值位于２２６．２ｎｍ左右属于Ｈｇ２准分子ＧＯ＾＋ｕ→ＸＯ＾＋ｇ束缚→自由跃迁的漫射带辐射，实验测量了漫射带强度随放电电流、气体温度和密度的变化关系，获得漫射带最大信号输出的工作参量。     

Stabilizing an uncertain production system

Consider a production system that consists ofm machines each of which can produce parts ofn types. When machinek is used, it produces a part of typei with probabilityp _ki . Requests arrive for parts, one at a time. With probability _i an arriving request is for a part of typei. The requests must be served without waiting. Thus, if a requested part is not available, it must be produced. We find necessary and sufficient conditions for the existence of a strategy (a choice of the machines to be used) which makes the inventory of parts stable and we provide such a strategy.Two variations of this model are also considered: the case of batch arrivals of requests, and that of a system where the requests can be queued.     

Solution of a class of stochastic linear-convex control problems using deterministic equivalents

In this paper, we identify a new class of stochastic linearconvex optimal control problems, whose solution can be obtained by solving appropriate equivalent deterministic optimal control problems. The term linear-convex is meant to imply that the dynamics is linear and the cost function is convex in the state variables, linear in the control variables, and separable. Moreover, some of the coefficients in the dynamics are allowed to be random and the expectations of the control variables are allowed to be constrained. For any stochastic linear-convex problem, the equivalent deterministic problem is obtained. Furthermore, it is shown that the optimal feedback policy of the stochastic problem is affine in its current state, where the affine transformation depends explicitly on the optimal solution of the equivalent deterministic problem in a simple way. The result is illustrated by its application to a simple stochastic inventory control problem.This research was supported in part by NSERC Grant A4617, by SSHRC Grant 410-83-0888, and by an INRIA Post-Doctoral Fellowship.     

电感耦合等离子体原子发射光谱分析中不同电离电位元素基体效应的比较研究

选择不同电离电位的基体元素K、Na、La、Y和Mg,比较研究了它们对分析元素谱线强度的影响,其影响程度与谱线激发电位及基体元素电离电位有定量的相关关系。碱金属基体(K、Na)和非碱金属基体(La、Y和Mg)对分析元素检出限、背景强度及其相对标准偏差的影响显著不同,后者的记忆效应也大于前者。La的电离电位与Na相差不大。但其基体效应与Y相似,表明墓体效应与基体元素的化学性质有关。     

氢化物发生电感耦合等离子体原子发射光谱同时测定纯铜中氢化物和非氢化物形成元素

用新型氢化物发生喇叭口Ⅱ型同心雾化器替代Meinhard同心雾化器，溶液雾化为气溶胶和氢化物发生反应生成氢化物气体就可以在雾化系统中同时进行，选用L-巯基丙氨酸(L-cysteine)和硫脲(thiourea)作为基体铜的掩蔽剂，无需分离基体铜，实现了电感耦合等离子体原子发射光谱(ICP-AES)同时测定纯铜样品中氢化物和非氢化物形成元素的目的。研究了酸度、NaBH4的浓度、载气流速及清洗时间对氢化物形成元素的影响，考察了铜基体对氢化物形成元素的化学干扰情况。用本方法测定了纯铜标准样品(NIST SRM400)，结果令人满意。在1000mg/L纯铜样品溶液中，其氢化物形成元素As、Bi、Sb、Sn、Se和Te的检出限分别为0．08、0．15、0．10、0．17、0．21和0．23μg／L。     

8-羟基喹啉-5-磺酸纤维微柱分离富集电感耦合等离子体原子发射光谱法同时测定多种痕量元素

本文合成了8-羟基喹啉-5-磺酸纤维滤纸片,以此做为微柱填充物同时富集了10种痕量元素,并分离了样品中的高盐组分.本方法可使痕量组分的分离与富集同步进行,因而特别适用于原子光谱测定前样品的预处理.     

氨基羧酸纤维分离富集-电感耦合等离子体原子发射光谱法测定多种痕量稀土元素

本文制备了氨基羧酸纤维滤纸片作为柱填充物，成功地分离和富集了地化样品中的多种稀土元素。富集后的稀土元素采用电感耦合等离子体原子发射光谱法测定，回收率为90％～109％。本文还对基体干扰及其消除进行了研究。     

Thermal decomposition of struvite

Struvite (NH₄MgPO₄·6H₂O) is a mineral often found in urinary tracts and kidneys. Thermal decomposition using slow low heating shows that the 'kidney' stone can be decomposed at temperatures below 40°C. At this temperature both ammonia and water are evolved. If more rapid heating is employed the decomposition occurs at around 80°C. The implication of this work rests with the use of low slow heat for the decomposition of the kidney stones. This revised version was published online in July 2006 with corrections to the Cover Date.