Basic study of the gelation of dimethacrylate‐type crosslinking agents

An investigation was made of the gelation of dimethacrylate‐type crosslinking agents in view of an application for separation media. The study mainly centered on a crosslinking agent, glycerol dimethacrylate (GDMA), which is relatively hydrophilic because of a hydroxyl group in the middle of its structure. The gelation of GDMA was compared with that of other hydrophobic crosslinking agents such as ethylene glycol dimethacrylate and 1,6‐hexanediol dimethacrylate. The diluents used in the study were toluene, toluene with methanol, and cyclohexanol. The gelation was observed in real time with a charge coupled device camera and dynamic light scattering (DLS). Also, the separated dry gels were extensively characterized with scanning electron microscopy, BET (N₂ absorption and desorption isotherm), and Fourier transform infrared. DLS analysis showed a stronger molecular interaction of GDMA gelation in toluene, whereas this interaction was much weaker in an alcoholic solvent such as toluene with methanol or cyclohexanol. This indicated that GDMA gelation might proceed through hydrogen bonding as well as a crosslinking reaction of vinyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 949–958, 2006     

Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006     

Synthesis and optical properties of a poly(p‐phenylenevinylene) derivative and polyfluorenes with bipolar groups along the main chain

A poly(p‐phenylenevinylene) derivative (PPV–TPA)] and a series of statistical copolyfluorenes (PF–TPA)] containing oxadiazole and triphenylamine segments along the main chain were synthesized by the Heck reaction and nickel‐mediated coupling, respectively. The PF–TPA copolyfluorenes with relatively low contents of oxadiazole and triphenylamine units were readily soluble in common organic solvents, whereas the other copolyfluorenes displayed lower solubility. PPV–TPA showed excellent solubility in solvents such as tetrahydrofuran (THF), dichloromethane, chloroform, and toluene. Thin films of the polymers absorbed light in the range of 375–396 nm and had optical band gaps of 2.76–2.98 eV. They emitted blue‐green light with a maximum at 414–522 nm. The fluorescence quantum yields in THF solutions were 0.08–0.53. The copolyfluorene PF–TPA thin films with high contents of oxadiazole and triphenylamine moieties emitted pure blue light that remained stable even after annealing at 150 °C for 4 h in air. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3556–3566, 2006     

Synthesis,characterization, and electrical properties of polypyrrole/multiwalled carbon nanotube composites

Size‐controllable polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites have been synthesized by in situ chemical oxidation polymerization directed by various concentrations of cationic surfactant cetyltrimethylammonium bromide (CTAB). Raman spectra, FTIR, SEM, and TEM were used to characterize their structure and morphology. These results showed that the composites are core (MWCNT)–shell (PPy) tubular structures with the thickness of the PPy layer in the range of 20–40 nm, depending on the concentration of CTAB. Raman and FTIR spectra of the composites are almost identical to those of PPy alone. The electrical conductivities of these composites are 1–2 orders of magnitude higher than those of PPy without MWCNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6449–6457, 2006     

Single electron transfer–degenerative chain transfer living radical polymerization of N‐butyl acrylate catalyzed by Na2S2O4 in water media

Living radical polymerization of n‐butyl acrylate was achieved by single electron transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionate. The plots of number–average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This methodology leads to the preparation of α,ω‐di(iodo) poly (butyl acrylate) (α,ω‐di(iodo)PBA) macroinitiators. The influence of polymerization degree ([monomer]/[initiator]), amount of catalyst, concentration of suspending agents and temperature were studied. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV), and refractive index (RI). The methodology studied in this work represents a possible route to prepare well‐tailored macromolecules made of butyl acrylate in an environmental friendly reaction medium. Moreover, such materials can be subsequently functionalized leading to the formation of different block copolymers of composition ABA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2809–2825, 2006     

A coincidence transmission electron microscope with digital waveform measuring system for analytical microscopy

We have been developing a new analytical transmission electron microscope (TEM), called a coincidence TEM, which in principle enables elemental mapping images to be observed at a high signal‐to‐noise (S/N) ratio under very low dose radiation conditions. In this paper, we report the development of a coincidence TEM with a digital waveform measuring system for obtaining a coincidence elemental mapping image. In this system, analog signals detected by a Si(Li) detector and a multianode, position‐sensitive photomultiplier (PSPM) are continuously converted into 12‐bit digital waveform data at a rate of 100 MHz, and transferred to a PC. From the transferred digital waveform data, information on X‐ray photon energy, electron incident position, and detection times of both X rays and electrons are calculated by digital waveform measurement, which lead to the observation of a successful coincidence elemental mapping image. Copyright © 2005 John Wiley & Sons, Ltd.     

Dependence of calculated electron effective attenuation lengths on transport mean free paths obtained from two atomic potentials

We report changes in electron effective attenuation lengths (EALs) resulting from use of transport mean free paths (TMFPs) obtained from the Dirac–Hartree–Fock (DHF) potential instead of the Thomas–Fermi–Dirac (TFD) potential in an algorithm used in the National Institute of Standards and Technology (NIST) Electron Effective‐Attenuation‐Length Database (SRD 82). TMFPs from the former potential are believed to be more reliable than those obtained from the latter potential. We investigated changes in the EALs for selected photoelectron and Auger‐electron lines in four elemental solids (Si, Cu, Ag, and W), for Si 2p photoelectrons of varying energy in SiO₂, and for photoelectrons excited by Al Kα X rays in four candidate gate‐dielectric materials (HfO₂, ZrO₂, HfSiO₄, and ZrSiO₄). For each material, we computed the change in the average EAL for a range of overlayer‐film thicknesses from zero to a maximum value corresponding to attenuation of the substrate signal to 10% of its original value. This EAL change was a maximum for electrons emitted normally from the surface and decreased monotonically with increasing emission angle. The maximum EAL change varied between ?4.4% and 2.6% for the three groups of materials. We found that the maximum EAL change correlated mainly with the TMFP change. We found that TMFP changes in other solids could generally lead to maximum EAL changes between ?2.6% and 1.9% for electron energies between 500 and 2000 eV. For lower energies, the maximum EAL changes could be larger for some solids. Our revised EALs for Si 2p photoelectrons in SiO₂ excited by Mg and Al Kα X rays agree within 0.5% with values reported by Seah and Spencer from a detailed analysis of SiO₂ film‐thickness measurements by XPS and other techniques. Copyright © 2006 John Wiley & Sons, Ltd.     

HER磁镜上硬X射线和热电子测量

一、引言 磁镜运行中,为了要知道它在电子回旋共振加热(ECRH)下形成热电子的参数,我们测量了硬X射线能谱、硬X射线发射的时间特性、不同磁场强度下形成热电子环的位置、以及热电子的脉冲幅度分布等。 HER是中国科学院等离子体物理研究所简单型磁镜装置,它的几何尺寸是,真空室长     

Radiation induced decomposition of halogenated organic compounds in water

Decomposition by ionizing radiations of p-chlorophenol and tetrachloroethylene in synthetic water samples at about 2 mg Cl L⁻¹, has been studied on laboratory-scale experiments. Bicarbonate/carbonate and nitrate ions, at two concentration levels (20 and 200 mg HCO₃⁻¹ and 1 and 50 mg NO₃⁻L⁻) were added to synthetic samples in order to evaluate their influence on decomposition yield. At 5 kGy γ dose level, a quantitative degradation of p-chlorophenol is obtained whereas only qualitative consideration can be drawn on tetracholoroethylene. Comparative study with respect to degradation of p-cholophenol solutions (about 2 mg Cl L⁻¹) by γ-rays and electron beam irradiation treatment at 0.5 kGy dose level, are in progress; preliminary results indicate that irradiation with γ-rays seems to be more efficient in terms of removal efficiency respect to electron beams source.