Perfluoro-1,3,5-tris(p-oligophenyl)benzenes: Amorphous Electron-Transport Materials with High-Glass-Transition Temperature and High Electron Mobility

Perfluoro-1,3,5-tris(p-quaterphenyl)benzene (PF-13Y) and perfluoro-1,3,5-tris(p-quinquephenyl)benzene (PF-16Y) have been synthesized and characterized. They showed higher glass transition temperatures compared with perfluoro-1,3,5-tris(p-terphenyl)benzene (PF-10Y). Organic light-emitting diodes were fabricated using these materials as the electron-transport layers. PF-13Y and -16Y are better electron transporters than PF-10Y. The electron mobilities of PF-10Y and Alq₃ were measured by the time-of-flight technique. PF-10Y showed higher electron mobilities (10⁻⁴ cm²/V s) and weaker electric field dependence compared with Alq₃.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.     

ESCA: Electron Spectroscopy for Chemical Analysis

A substance on which X-rays fall emits photoelectrons and Auger electrons. The energy spectra of the electrons emitted provide information about the electronic structure in the specimen, ranging from the innermost atomic levels and their dependence on the chemical environment to the molecular orbitals of the valence electrons and the band structure in solids. Electron spectra of this nature can now be recorded with high-resolution instruments; their analysis offers new aspects for investigation of chemical composition. The method of electron spectroscopy developed for this purpose, which has now been developed to a high degree of perfection, will be referred to in the following discussion as ESCA (Electron Spectroscopy for Chemical Analysis).     

Time-resolved fluorescence analysis of the mobile flavin cofactor in p -hydroxybenzoate hydroxylase

Conformational heterogeneity of the FAD cofactor in p-hydroxybenzoate hydroxylase (PHBH) was investigated with time-resolved polarized flavin fluorescence. For binary enzyme/substrate (analogue) complexes of wild-type PHBH and Tyr222 mutants, crystallographic studies have revealed two distinct flavin conformations; the ‘in’ conformation with the isoalloxazine ring located in the active site, and the ‘out’ conformation with the isoalloxazine ring disposed towards the protein surface. Fluorescence-lifetime analysis of these complexes revealed similar lifetime distributions for the ‘in’ and ‘out’ conformations. The reason for this is twofold. First, the active site of PHBH contains various potential fluorescence-quenching sites close to the flavin. Fluorescence analysis of uncomplexed PHBH Y222V and Y222A showed that Tyr222 is responsible for picosecond fluorescence quenching free enzyme. In addition, other potential quenching sites, including a tryptophan and two tyrosines involved in substrate binding, are located nearby. Since the shortest distance between these quenching sites and the isoalloxazine ring differs only little on average, these aromatic residues are likely to contribute to fluorescence quenching. Second, the effect of flavin conformation on the fluorescence lifetime distribution is blurred by binding of the aromatic substrates: saturation with aromatic substrates induces highly efficient fluorescence quenching. The flavin conformation is therefore only reflected in the small relative contributions of the longer lifetimes.     

The electron microscope characterization of the fine structure of nylon 6: II. On the rearrangement of the structure during cold-drawing

The transmission electron microscope (TEM) visualization of the supermolecular structure of cold-drawn, oriented nylon 6 bulk material (bristles) by stained ultra-thin sections is reported. For evaluating the electron micrographs optical diffraction (OD) has been applied in comparison with small angle X-ray scattering (SAXS). The deformation of the spherulites was followed by polarization microscopy. In addition, investigations were carried out on commercial nylon 6 fibres. As the main result a transverse structure was revealed within the drawn samples at draw ratios between =4 and 4.5, consisting of mosaic crystals which show some lateral alignment. The structure is described by a modified layer lattice model. While the long period may increase slightly during drawing, the crystallite thickness remains almost constant. Fibres with =3.4 show a similarly oriented structure though the lateral alignment of the crystals is not so pronounced.     

Degradation in gain for a free electron laser amplifier due to electron momentum spread

A finite spread in axial momentum for the electron beam in a free electron laser amplifier is shown to decrease the small-signal gain. For millimeter and sub-millimeter wave amplifiers, where exponential growth dominates the gain, it is shown that the gain is approximately 3 db below that for a cold beam if the relative momentum spread (u/u)_1/2 = (G_o/248)^1/2 (_o/L), where G_o1 is the gain in db for the cold-beam case, _o is the magnetic wiggler period, and L is the amplifier length. Exact numerical examples are given for representative FEL amplifiers at 35 and 550 GHz.This research was sponsored by the U.S. Office of Naval Research, and by the U.S.-Israel Binational Science Foundation.     

Polarization of coherent synchrotron radiation from an electron beam rotating in a plasma

After eliminating reflections from the walls of the plasma container, we observed polarization of the coherent synchrotron radiation from a relativistic electron beam rotating in a plasma. Several features of the polarization agree well with calculations based on the single particle synchrotron radiation theory. A particular polarization ratio (Fig. 3) does not, however. We deduce from this direct diffraction of the radiation by the beam electrons. This is strong evidence for beam-particle bunches of size cm. Also, there must be some absorption of the extraordinary wave to account for the observations. We suggest a way to apply these results to measure the pitch angle of the beam.Work supported by Army Research Office.     

Ultrasound-Assisted Synthesis of Fluorescent Azatetracyclic Derivatives: An Energy-Efficient Approach

We report here an energy-efficient and straight synthesis of two new classes of derivatized fluorescent azatetracycles under ultrasound (US) irradiation. A first class of azatetracyclic compounds was synthesized by heterogeneous catalytic bromination of the α-keto substituent attached to the pyrrole moiety of the tetracyclic cycloadducts, while for the second, one class was synthesized by nucleophilic substitution of the bromide with the azide group. Comparative with conventional thermal heating (TH) under US irradiation, both types of reactions occur with substantially higher yields, shortened reaction time (from days to hours), lesser energy consumed, easier workup of the reaction, and smaller amounts of solvent required (at least three to five-fold less compared to TH), which make these reactions to be considered as energy efficient. The derivatized azatetracycle are blue emitters with λmax of fluorescence around 430–445 nm. A certain influence of the azatetracycle substituents concerning absorption and fluorescent properties was observed. Compounds anchored with a bulky azide group have shown decreased fluorescence intensity compared with corresponding bromides.     

热暴露对SiC纤维增强Ti基复合材料基体织构的影响

本文利用电子背散射衍射（EBSD）技术,研究了高温热暴露对SiC纤维增强Ti-6A1—4V复合材料基体织构的影响。结果表明,相对于制备态复合材料较为集中的晶粒取向,900℃10h热暴露后的复合材料其晶粒生长的方向既有基面方向,又有棱面方向,同时还存在锥面方向。随着热暴露时间的延长,900℃75h热暴露的复合材料基面方向的生长方式与900℃10h热暴露的复合材料情况恰好相反。另外,无论是基面方向还是棱面方向,随着热暴露时间的延长,晶粒生长的取向均有向单一取向演化的趋势,且锥面方向上的生长会逐渐消失。