Reduced Graphene Oxide Supported Cobalt Bipyridyl Complex for Sensitive Detection of Methyl Parathion in Fruits and Vegetables

Herein, we are described a green route to prepare reduced graphene oxide supported cobalt inorganic complex nanocomposite (GRGO/[Co(bpy)₃]) (bpy=2,2′‐bipyridine) through facile and wet chemical approach. The formation of the nanocomposite was confirmed through suitable physical and chemical characterization techniques. The GRGO/[Co(bpy)₃] nanocomposite was coated on the pretreated glassy carbon electrode (GCE). The GCE/GRGO/[Co(bpy)₃] modified electrode has excellent electrocatalytic ability towards methyl parathion reduction, while the overpotential drops drastically to –0.18 V (vs. Ag/AgCl). Moreover, the effect of concentration, scan rate and electrolyte pH were detail studied. Besides, the linear response range was 0.05‐1700 μM and the detection limit was 0.0029 μM (S/N=3) and the sensitivity was 1.8197 μA μM⁻¹ cm⁻². Moreover, the fabricated electrode has high level of selectivity, which delivers satisfactory repeatability, reproducibility and stability. The sensing method was successfully demonstrated in real samples such as, tomato and apple samples.     

叶绿素敏化二氧化钛纳米管电极光电性能及其增强机理

为了研究叶绿素的敏化机理,本文以菠菜叶片叶绿素的乙醇浸提液敏化纳米管TiO_2电极,在Na2SO4水溶液电解液中测定其光电性能。敏化电极的光电流响应曲线显示,叶绿素浸提液敏化纳米管TiO_2电极时会显著改变电极的光电流值,而敏化Ti电极时则产生光电流极小。电极的循环伏安曲线则表明,叶绿素浸提液使电极上的氧化反应更容易发生。测定不同浓度的叶绿素浸提液敏化纳米管TiO_2电极的单色光光电转化效率(IPCE)图谱,结果表明,合适的叶绿素浓度(7.123~71.23μg/L)使电极IPCE平均增加2倍以上,但浓度增大至7123μg/L时,其敏化电极IPCE则明显降低;同时发现叶绿素的敏化作用未明显改变TiO_2电极IPCE图谱的特征谱峰位置。根据实验数据和结果,得出在水溶液中叶绿素改变纳米管TiO_2光电性能的机理,主要是通过叶绿素分子与TiO_2电极中的光生空穴发生反应,进而减少光生电子与空穴的复合,使电极有效光生电子数量增加,光电流密度增大,最终提高TiO_2电极的IPCE。     

TiO_2纳米管电极上电化学还原CO_2生成CH_3OH

采用原位阳极氧化-煅烧法制备TiO_2纳米管(TiO_2NTs)电极,运用X射线衍射(XRD)、电场发射扫描电子显微镜(FESEM)、X射线光电子能谱(XPS)、双电位阶跃测试等对制备电极进行表征,考察了其在0.1mol?L~(-1) KHCO_3水溶液中电化学还原CO_2的催化活性。结果表明TiO_2NTs电极上电化学还原CO_2的主产物为CH_3OH,CH_3OH由HCOOH和HCHO进一步还原而来。电极制备的最佳煅烧温度为450℃(TiO_2NTs-450),电解电位-0.56 V(vs RHE(可逆氢电极))时反应120 min后,生成CH_3OH的法拉第效率和分电流密度分别为85.8%和0.2 m A?cm~(-2)。与550和650℃煅烧的电极相比,TiO_2NTs-450电极具有更高的催化活性,归因于电极表面更多的三价钛活性位,有利于CO_2吸附,从而对·CO_2-起到稳定的作用,速率控制步骤转变为·CO_2-的质子化反应。     

Recent progresses on solution-processed silver nanowire based transparent conducting electrodes for organic solar cells

Organic photovoltaics (OPVs) are considered as a future alternative for conventional silicon based solar cells, owing to their low cost, ease of production and high-throughput. The transparent conducting electrode (TCE) is a fundamental component of OPVs. Traditionally, indium tin oxide (ITO) has been mainly utilized as a TCE in OPV applications due to its relatively high transparency and low sheet resistance. However, increasing demand for the optoelectronic devices has led to large fluctuations in ITO prices in the past decade and ITO is known to account more than 50% of the total cost of OPV devices. Thus, it is believed that development of solution-processable alternative materials is of great importance in reducing the cost of OPVs. Numerous materials, including silver nanowires, carbon nanotubes, graphene and conducting polymers, have been offered as replacements for ITO. This article reviews recent progress on fabrication of TCE via solution based coating techniques of silver nanowires (Ag NWs). In addition, performance of the Ag NWs based TCE in OPVs is summarized. Finally, we explore the future outlook for Ag NWs based TCE at the end of the review.     

线-铝箔电极电晕放电激励器的推力理论与实验研究

空气电晕放电离子风激励器无需旋转部件, 仅通过消耗电能就能直接产生驱动力, 它是一种新型的动力技术, 备受国内外航空航天界的广泛关注. 目前对空气电晕放电离子风激励器的推力产生机理虽有各种解释, 但是现有理论均不能统一各种条件下的实验结果, 仍需要开展进一步的分析与研究. 本文以线-铝箔电极电晕放电激励器为研究对象, 通过实验研究发现作用在线电极与铝箔电极上的静电力不对称, 而且改变铝箔电极纵向高度和气压均能影响激励器的推力大小; 通过理论分析, 考虑电晕层与空间电荷的影响, 建立了线-铝箔电极电晕放电激励器的推力计算模型, 其计算值与实测值比较一致. 基于上述实验现象与理论建模分析, 本文认为线-铝箔电极电晕放电激励器的推力主要来源于线电极电晕产生的空间电荷对电极系统产生了不对称静电力作用, 使激励器出现净静电力作用.     

铜-钼源漏电极对非晶氧化铟镓锌薄膜晶体管性能的改善

在铜(Cu)和非晶铟镓锌氧化物(a-IGZO)之间插入30 nm厚的钼(Mo)接触层, 制备了具有Cu-Mo源漏电极的a-IGZO薄膜晶体管(TFT). Mo接触层不仅能够抑制Cu与a-IGZO有源层之间的扩散, 而且提高了Cu电极与玻璃基底以及栅极绝缘层的结合强度. 制备的Cu-Mo结构TFT与纯Cu 结构TFT相比, 具有较高的迁移率(～9.26 cm²·V^-1·s^-1)、更短的电流传输长度(～0.2 μm)、更低的接触电阻(～1072 Ω)和有效接触电阻率(～1×10^-4Ω·cm²), 能够满足TFT 阵列高导互联的要求.     

Electrochemical assessment of water|ionic liquid biphasic systems towards cesium extraction from nuclear waste

A room temperature ionic liquid (IL) composed of a quaternary alkylphosphonium (trihexyltetradecylphosphonium, P₆₆₆₁₄⁺) and tetrakis(pentafluorophenyl)borate anion (TB⁻) was employed within a water|P₆₆₆₁₄TB (w|P₆₆₆₁₄TB or w|IL) biphasic system to evaluate cesium ion extraction in comparison to that with a traditional water|organic solvent (w|o) combination. ¹³⁷Cs is a major contributor to the radioactivity of spent nuclear fuel as it leaves the reactor, and its extraction efficiency is therefore of considerable importance. The extraction was facilitated by the ligand octyl(phenyl)-N,N′-diisobutylcarbamoylphosphine oxide (CMPO) used in TRans-Uranium EXtraction processes and investigated through well established liquid|liquid electrochemistry. This study gave access to the metal ion to ligand (1:n) stoichiometry and overall complexation constant, β, of the interfacial complexation reaction which were determined to be 1:3 and 1.6 × 10¹¹ at the w|P₆₆₆₁₄TB interface while the study at w|o elicited an n equal to 1 with β equal to 86.5. Through a straightforward relationship, these complexation constant values were converted to distribution coefficients, δ_α, with the ligand concentrations studied for comparison to other studies present in the literature; the w|o and w|IL systems gave δ_α of 2 and 8.2 × 10⁷, respectively, indicating a higher overall extraction efficiency for the latter. For the w|o system, the metal ion-ligand stoichiometries were confirmed through isotopic distribution analysis of mass spectra obtained by the direct injection of an emulsified water–organic solvent mixture into an electron spray ionization mass spectrometer.     

Voltammetric Behavior of Semicarbazide at Graphene Modified Electrode and Application to Detection

Herein voltammetric behaviors of semicarbazide (SEM) are investigated by employing a graphene modified working electrode, which displays attractive electroanalytical properties. In the acetate buffer solution of pH 4.00, there is a well‐defined oxidative peak of SEM, attributing to the irreversible and adsorption‐controlled electrode reaction with 2 electrons participation. The values of apparent heterogeneous electron transfer rate constant k′_s with the redox are 0.0061 s^?1 and 0.0009 s^?1, respectively, for two scan rate section. After the experimental parameters, which influence the voltammetric responses of SEM, including supporting electrolyte, pH, accumulation time and accumulation potential, etc., are optimized, it is found that the anodic peak current of SEM is proportional to its concentration in the range of 4 ‐ 40 μmol/L with a detection limit of 1 μmol/L (S/N = 3). Then, an electrochemical method for detecting SEM quantitatively is developed successfully. The concentrations of SEM in fortified tap water samples are tested with satisfactory recovery, indicating that the novel method is strongly promising in the environmental monitoring application.     

正极性电火花加工的损耗机理及其参数分析

本文基于场致发射电子对阳极表面材的料溅射能量分析,研究了引起正极性电火花加工时阳极材料的损耗机理,并给出了正极性加工时电极损耗率的理论极大值与极小值方程。设计并进行了不同工艺参数下紫铜电极和A3＃钢电极单孔电火花加工对比实验,实验表明：相同工艺参数下,紫铜电极比A3＃钢电极加工时的极间放电能量大,加工效率对比上前者是后者的极的75倍多,但电极材料的损耗率对比上,前者是后者的近10倍;不同工艺参数下,极间有效放电时间和放电能量越大,加工效率越高,相应的电极的损耗率也增加,但损耗率的增加程度要远小于加工效率的提高程度。     

用于甲醛检测的电化学生物传感器的设计

目前用于检测甲醛的传感器有电化学传感器、光学传感器和光生化传感器等。但是当用于实际检测的时候都会存在这样或者那样的问题,比如稳定性差、检出限低、所受干扰物多等等,针对这些问题,文章设计了一种简便、操作简单、适用于实时在线检测甲醛的电化学生物传感器,针对水溶液及混合溶液中甲醛的检测。