乙酰二茂铁修饰碳糊电极测定废水中对氨基苯酚

利用线性扫描溶出伏安法研究了对氨基苯酚(PAP)在乙酰二茂铁修饰碳糊电极电化学行为。结果表明:在磷酸盐缓冲溶液(pH3.2)中,该修饰电极对PAP具有较好的催化活性,其峰电流与PAP浓度在7.0×10-7～3.0×10-5mol/L范围内呈线性关系,检出限为1.0×10-7mol/L(S/N=3)。利用该法测定了模拟水样中PAP的含量。     

槲皮素在悬汞电极上的伏安行为研究

应用循环扫描伏安法考察槲皮素在悬汞电极上的电化学行为,并用线性扫描伏安法测定其含量。在0.1mol/LNa2CO3-NaHCO3(pH9.51)缓冲溶液中,槲皮素在-1.33V(vs.Ag/AgCl)处出现灵敏的还原峰,峰电流与其浓度在2.0×10-6～2.0×10-5mol/L(r=0.9989)范围内呈良好的线性关系。该方法可直接用于罗布麻叶中槲皮素的含量测定。     

含氢电极脉冲放电等离子体特性诊断

利用飞行时间质谱法诊断了含氢电极脉冲真空弧离子源放电等离子体成分、离子电荷状态及离子扩散速度等特性.实验结果表明,含氢电极脉冲真空弧离子源放电等离子体的离子成分主要由H+,Ti+,Ti2+和Ti3+组成,其中Ti2+占主要部分.当放电电流为40～80 A时,Ti离子的平均电荷数在1.95～2.13之间,随着放电电流的增...     

Cyclic voltammetry of nitrophenyl N‐glycosides on mercury electrode

Ten nitrophenyl N‐glycosides have been studied electrochemically in neutral (at pH 7) water–organic solutions by cyclic voltammetry using static mercury drop electrode. For all compounds under investigation the two electrochemical processes have been observed: the four‐electron irreversible reduction of their nitro groups to the corresponding phenylhydroxylamine derivatives, as well as the two‐electron quasi‐reversible process between phenylhydroxylamine and nitroso derivatives. For three compounds the additional electrochemical processes have been also observed, which can be connected with the formation of azoxybenzene derivatives. The potentials of both redox processes: a two‐electron quasi‐reversible R? NHOH/R? NO (E_f) and four‐electron irreversible R? NO₂/R? NHOH (E_pc(I)) systems have been determined and discussed according to crystal structures of selected compounds. E_f and E_pc(I) depended strongly on the positive mesomeric effect (caused by glycosidic nitrogen atom), as well as on the intramolecular hydrogen bond between electroactive nitro group and the hydrogen atom at the glycosidic atom observed in N‐o‐nitrophenyl‐2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐glucopyranosylamine. Moreover, the chirality of selected reactants has had the pronounced effect on the E_pc(I). Copyright © 2011 John Wiley & Sons, Ltd.     

不同厚度的活性层及阴极的改变对聚合物太阳电池性能的影响

以MEH-PPV(poly(2-methoxy-5-(2'-ethylhexoxy)-1,4-phenylene vinylene))为电子给体材料, PCBM(1-(3-methoxycarbonyl)-propyl-1-1-phenyl-(6,6)C₆₁)为电子受体材料, 制成了共混体系太阳电池.研究了不同厚度活性层对太阳电池性能的影响.结果表明, 活性层厚度为100 nm时,太阳电池具有最佳性能.活性层厚度的增加,增大了光生电荷的复合,减少了太阳电池的填充因子,从而减少了太阳电 关键词： 太阳电池 厚度 电极 性能     

非对称电极表面微观形貌对交流电渗流速的影响

经典交流电渗理论是利用电场进行非机械式微流体驱动的基础.传统理论交流电渗理论以双电层理论为基础,通过耦合电场方程以及流场方程得到微电极表面交流电渗流速表达式,通常与实验流速相差较大. 以电极表面微观形貌对交流电渗流速的影响为研究目标,定义微电极表面粗糙度为微观形貌特征参数,建立了等效双电层模型,并对传统交流电渗流速公式进行了修正.理论并仿真分析了表面粗糙度对于交流电渗流速的影响,利用非对称电极对交流电渗微流体驱动进行了实验研究,并进行对比分析.结果表明,理论分析与实验结果具有较好的一致性. 关键词： 交流电渗 电极表面粗糙度 等效双电层     

纳米TiO2叶片状阵列电极的制备及其在染料敏化太阳电池中电子的输运性能

在低温条件下采用定向刻蚀技术, 对金属Ti片表面用H₂O₂溶液进行刻蚀氧化, 制备了垂直生长的纳米TiO₂叶片状阵列薄膜电极. 通过X射线衍射分析表明, 纳米TiO₂叶片状阵列薄膜经500 ℃下烧结1 h后, 从无定型转变为锐钛矿相. 场发射扫描电子显微镜观察表明: 在80 ℃下的H₂O₂溶液刻蚀氧化, 经1 d制备得到的是Ti片表面垂直生长的叶片状阵列, 其形貌均匀且完整地 关键词： 2')" href="#">纳米TiO₂ 叶片状阵列电极 染料敏化太阳电池 电子传输     

Modifications of interface chemistry of LSM-YSZ composite by ceria nanoparticles

A porous composite electrode LSM-YSZ (lanthanum strontium manganite and yttria stabilized zirconia) was impregnated with different amounts of SDC (samarium substituted ceria) nanoparticles. The materials were investigated with X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy to determine the microstructure, the interface chemistry and the surface chemistry of the various impregnated samples. The SDC nanoparticles cover the surface of the LSM-YSZ backbone to a large extent; they are approximately 5-20 nm in diameter and have a cubic crystal structure. Low concentrations of lanthanum and manganese originating from LSM were detected within SDC particles. It was also observed that the relative atomic concentration of strontium increased on the LSM-YSZ surface with increasing amount of SDC nanoparticles. These findings are related to the applied nanoparticle impregnation method. It is indicated that interactions between surfactant, nanoparticles, impregnation solution and the LSM-YSZ composite take place which can locally affect the surface and interface chemistry of the investigated materials.     

Catalytic activity of carbon-supported iridium oxide for oxygen reduction reaction as a Pt-free catalyst in polymer electrolyte fuel cell

Iridium oxide supported on Vulcan XC-72 carbon black (IrO₂/C) as a cathode catalyst for polymer electrolyte fuel cell (PEFC) has been characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD) measurement. The IrO₂ particles were 8-160 nm in diameter. The oxygen electroreduction activity was studied by cyclic voltammetry (CV). It was found that IrO₂/C had high oxygen reduction reaction (ORR) activity. The performance of the membrane electrode assemble (MEA) was also tested in a single PEFC and showed that IrO₂/C catalyst would be potential candidates for use as cathode catalyst in PEFC.     

Electrocatalysis of oxygen reduction reaction on Nafion/platinum/gas diffusion layer electrode for PEM fuel cell

In this work a new membrane electrode based on Pt-coated Nafion membrane was fabricated. Chemical deposition process was used to coat platinum on Nafion 117 membrane and then Pt-coated Nafion membrane was hot pressed on gas diffusion layer (GDL) to make new membrane electrode. The electrochemical and chemical studies of the Pt-coated Nafions were investigated by electrochemical techniques, X-ray diffraction and scanning electron microscopy. The electrochemical results indicated that as the concentration of H₂PtCl₆ increased, the oxygen reduction reaction rate increased until the concentration was reached where the reduction reaction was limited by the problem of mass transport. The electrochemical results for oxygen reduction reaction showed that the new electrode which prepared by plating Nafion membrane with 0.06 M H₂PtCl₆ in electroless plating solution, has a higher performance than other electrodes. The XRD results showed that the average platinum particle size of the best sample was about 3 nm. The loading of platinum for this electrode was 0.153 mg cm⁻².