Phase transformations during electrochemical incorporation of lithium in intermetallic compounds of aluminum

Comparative study of the regularities of the reaction and specific features of phase formation during electrochemical incorporation of lithium from propylene carbonate solutions in intermetallic aluminum-based compounds (CuAl₂, Mg₂Al₃, and NiAl) and pure metals (Al, Cu, Mg, and Ni) was performed. The initial stage of the process was shown to be dissolution of lithium in the solid phase limited by diffusion for all studied substrates. Trace amounts of lithium-containing by-products, were detected in NiAl, Ni, and Cu samples. The subsequent change in the limiting stage is related to the beginning of formation of a new phase: metallic lithium (on Mg₂Al₃, NiAl, Mg, Ni, and Cu) or LiAl (on Al and CuAl₂ cathodes). In the latter case, the solid-phase substitution occurs, which is formally described by the equation: CuAl₂+2Li⁺+2e→2LiAl+Cu. Thus, the specific features of phase formation on the CuAl₂ electrode correspond to the highest (among three intermetallides studied) concentration of Al atoms in the crystal lattice of the compound. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8. pp. 1525–1530, August, 1998.     

Effect of the Structure of Nonuniform Conducting Polymer Films on Their Electrochemical Impedance Response

Electrochemical impedance spectroscopy is used to characterize thin p-doped polypyrrole (PPy) films in propylene carbonate (PC) solutions and poly(trifluorophenyl)thiophene (PTFPT), in solutions based on sulfolane (SF). It appears that the latter film is much less swelled compared to the former one. One consequence of this difference is that the PTFPT film shows a much higher bulk resistance compared to that for the PPy film. Another important consequence is that the swelling of the PTFPT film is essentially physically non-homogeneous. Two parallel, uncoupled paths, with different chemical diffusion coefficients, model the experimental results adequately. In order to quantify the impedance spectra for both polymer films, we use a model proposed by Rubinstein et al. explaining the difference in the diffusion coefficients of Ru(bpy)^3+/2+ ₃ within a thin Nafion film. The model can also predict the impedance spectra for composite powdery electrodes containing different particle sizes, such as composite cathodes and graphite anodes used in lithium batteries.     

应用扫描电化学显微镜研究电子在室温离子液体与1,2-二氯乙烷混合溶液/水相界面上的转移反应

应用扫描电化学显微镜研究了室温离子液体(Omim·Tf2N)与1,2-二氯乙烷(DCE)混合溶液/水界面上的电子转移反应. 在保持共同离子(Tf2N-)的浓度比恒定及异相电子转移反应由界面电势差所决定的条件下, 研究了离子液体和DCE混合溶液中二茂铁(Fc)与水相中亚铁氰化钾[K4Fe(CN)6]之间异相电子转移反应. 探讨了混合溶液中离子液体的体积分数(xRTIL)的变化对混合溶液/水界面上电子转移反应的影响. 结果表明, 随着xRTIL的减小(从1减小到0.1), Fc在混合溶液中的扩散系数单调递增(从2.730×10-7 cm2·s-1增加到9.131×10-6 cm2·s-1); 而异相电子转移反应速率常数(k)则先逐渐减小(从8.0 mol-1·cm·s-1减小到0.32 mol-1·cm·s-1), 之后又略有增大(从0.32 mol-1·cm·s-1增大到0.48 mol-1·cm·s-1). 对这种现象可能的原因进行了较详细探讨.     

ELECTROCHEMICAL POLYMERIZATION OF ANILINE IN PHOSPHORIC ACID AND THE PROPERTIES OF POLYANILINE

The behavior of the electrochemical polymerization of aniline in a weak acid, phosphoric acid, is very similar to that in strong acids, i.e. its polymerization rate increases quickly with the electrolysis time. The FTIR spectra of polyaniline samples synthesized in phosphoric acid indicate that the counter ion H2PO4^- is present in both the oxidized form and the reduced form of polyaniline. The counter ion plays an important role in adjusting the pH value at the electrode surface of polyaniline during the oxidation and reduction processes. As a result, a pair of redox peaks still appear in cyclic voltammograms of polyaniline in a solution of sodium sulfate of pH 5.5 and in a solution of NaH2PO4 of pH 7.0,respectively, at low potential scan rate; and the color of polyaniline film also changes with applied potential at pH 7.0. Thus,the pH region for the electrochemical activity and the electrochromism of polyaniline is extended to pH 5.5 for a solution of sodium sulfate and to pH 7.0 for a solution of NaH2PO4. The conductivity of polyaniline is 3.3 S cm^-1, depending on the concentration of phosphoric acid used in the stage of polymerization of aniline. The result of elemental analysis of polyaniline is presented here.     

Cathodic synthesis of esters of 1,1,2,2-cycloalkanetetracarboxylic acids derived from 1,1,2,2-ethane- or ethylenecarboxylate esters

The cathodic electrolysis of esters of 1,1,2,2-ethane- or ethylenetetracarboxylic acids in the presence of dihaloalkanes leads to esters of 1,1,2,2-cycloalkanetetracarboxylic acids.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 217–220, January, 1992.     

Copper‐Bismuth Bimetallic Microspheres for Selective Electrocatalytic Reduction of CO2 to Formate

Electrocatalytic carbon dioxide reduction holds great promise for reducing the atmospheric CO₂ level and alleviating the energy crisis. High‐performance electrocatalysts are often required in order to lower the high overpotential and expedite the sluggish reaction kinetics of CO₂ electroreduction. Copper is a promising candidate metal. However, it usually suffers from the issues of poor stability and low product selectivity. In this work, bimetallic Cu‐Bi is obtained by reducing the microspherical copper bismuthate (CuBi₂O₄) for selectively catalyzing the CO₂ reduction to formate (HCOO^–). The bimetallic Cu‐Bi electrocatalyst exhibits high activity and selectivity with the Faradic efficiency over 90% in a wide potential window. A maximum Faradaic efficiency of ~95% is obtained at –0.93 V versus reversible hydrogen electrode. Furthermore, the catalyst shows high stability over 6 h with Faradaic efficiency of ~95%. This study provides an important clue in designing new functional materials for CO₂ electroreduction with high activity and selectivity.     

新型含二茂铁有机配合物的合成及其电化学性质

以二茂铁为起始原料,经氯汞化反应、溴代反应、Suzuki偶联反应、水解反应和取代反应等5步反应合成了一种新型的含二茂铁结构单元的有机配合物(7),其结构经1H NMR、13C NMR、IR和HR-MS(ESI-TOF)表征。电化学研究结果表明:化合物6的E1/2小于化合物7,具有较高的氧化还原活性。     

锂离子电池锡氧化物基负极材料的湿化学合成与电化学性质

采用新兴的湿化学方法合成了锡氧化物基粉末材料。用X-射线衍射、扫描电镜和电化学方法对材料的微观结构、形貌和电化学性能进行了详细的研究。结果表明，经400 ℃热处理4 h的锡氧化物基材料的颗粒大小均匀，平均粒径约为200 nm。这种材料的可逆充电容量超过570 mAh·g^-1，30次循环后平均每次循环的容量衰减只有0.15%。良好的电化学性能表明锡氧化物基材料有望作为新一代锂离子电池的负极材料。     

磺胺甲恶唑在二硫化钼纳米片修饰电极上的电化学行为

采用了研磨后超声和离心分离方法制备了二硫化钼纳米片,通过原子力显微镜(AFM)和扫描电子显微镜(SEM)对不同离心速度分离的二硫化钼纳米片进行了表征。使用循环伏安法(CV)和差分脉冲伏安法(DPV)在磺胺甲恶唑溶液中对二硫化钼纳米片修饰的玻碳电极进行了电化学行为研究。结果显示,磺胺甲恶唑在二硫化钼修饰电极的循环伏安图上有一对氧化还原峰。其峰电流值与扫描速度的平方根成正比,是扩散控制过程。DPV扫描结果显示,磺胺甲恶唑的峰电流与其浓度之间存在着明显的线性关系。研磨超声方法制备出的二硫化钼纳米片层材料在电极上能够加速电子的转移和传输,从而有效提高峰电流值,为进一步研制准确测定磺胺甲恶唑电化学传感器提供了一种可选择的材料和电化学分析方法。     

类球形正交LiMnO2的制备、微结构和电化学性能

以共沉淀法得到的类球形MnCO₃为前驱物，制备了类球形正交LiMnO₂(So-LiMnO₂)，采用XRD、SEM和N₂吸附技术对样品进行表征；与非球形正交LiMnO₂(No-LiMnO₂)进行了对比研究。结果表明：o-LiMnO₂的堆垛层错度、结晶状况、颗粒形貌和大小与前驱物的微结构密切相关；在80次电化学循环测试过程中，So-LiMnO₂经15次循环可达最大的放电容量152 mAh·g^-1，其容量衰减平均每次循环0.58 mAh·g^-1；而No-LiMnO₂要经过38次循环才能达到最大放电容量128 mAh·g^-1，容量衰减平均每次循环高达1.24 mAh·g^-1。TEM和EDS分析证明：由一次粒子团聚的类球形So-LiMnO₂能有效地抑制电解液对材料的腐蚀、减少Mn的溶解，从而提高了电化学循环能力。