ZIF‐8 Derived Graphene‐Based Nitrogen‐Doped Porous Carbon Sheets as Highly Efficient and Durable Oxygen Reduction Electrocatalysts

Nitrogen‐doped carbon (NC) materials have been proposed as next‐generation oxygen reduction reaction (ORR) catalysts to significantly improve scalability and reduce costs, but these alternatives usually exhibit low activity and/or gradual deactivation during use. Here, we develop new 2D sandwich‐like zeolitic imidazolate framework (ZIF) derived graphene‐based nitrogen‐doped porous carbon sheets (GNPCSs) obtained by in situ growing ZIF on graphene oxide (GO). Compared to commercial Pt/C catalyst, the GNPCSs show comparable onset potential, higher current density, and especially an excellent tolerance to methanol and superior durability in the ORR. Those properties might be attributed to a synergistic effect between NC and graphene with regard to structure and composition. Furthermore, higher open‐circuit voltage and power density are obtained in direct methanol fuel cells.     

Advances in interactive supported electrocatalysts for hydrogen and oxygen electrode reactions

Magneli phases [A. Magneli, Acta Chem. Scand. 13 (1959) 5] have been introduced as a unique electron conductive and interactive support for electrocatalysis both in hydrogen (HELR) and oxygen (OELR) electrode reactions in water electrolysis and Low Temperature PEM Fuel Cells (LT PEM FC). The Strong Metal-Support Interaction (SMSI) that imposes the former implies: (i) the hypo-hyper-d-interbonding effect and its catalytic consequences, and (ii) the interactive primary oxide (M-OH) spillover from the hypo-d-oxide support as a dynamic electrocatalytic contribution. The stronger the bonding, the more strained appear d-orbitals, thereby the less strong the intermediate adsorptive strength in the rate determining step (RDS), and consequently, the faster the facilitated catalytic electrode reaction arises. At the same time the primary oxide spillover transferred from the hypo-d-oxide support directly interferes and reacts either individually and directly to contribute to finish the oxygen reduction, or with other interactive species, like CO to contribute to the CO tolerance. In such a respect, the conditions to provide Au to act as the reversible hydrogen electrode have been proved either by its potentiodynamic surface reconstruction in a heavy water solution, or by the nanostructured SMSI Au on anatase titania with characteristic strained d-orbitals in such a hypo-hyper-d-interactive bonding (Au/TiO₂). In the same context, some spontaneous tendency towards monoatomic network dispersion of Pt upon Magneli phases makes it possible to produce an advanced interactive supported electrocatalyst for cathodic oxygen reduction (ORR). The strained hypo-hyper-d-interelectronic and inter-d-orbital metal/hypo-d-oxide support bonding relative to the strength of the latter, has been inferred to be the basis of the synergistic electrocatalytic effect both in the HELR and ORR.     

Hollow Chevrel‐Phase NiMo3S4 for Hydrogen Evolution in Alkaline Electrolytes

Electrochemical water splitting to generate molecular hydrogen requires catalysts that are cheap, active, and stable, particularly for alkaline electrolyzers, where the cathodic hydrogen evolution reaction is slower in base than in acid even on platinum. Herein, we describe the synthesis of new hollow Chevrel‐phase NiMo₃S₄ and its alkaline hydrogen evolution reaction (HER) performance: onset potential of ?59 mV, Tafel slope of 98 mV per decade, and exchange current density of 3.9×10^?2 mA cm^?2. This Chevrel‐phase chalcogenide also demonstrates outstanding long‐term stability under harsh HER cycling conditions. Chevrel‐phase nanomaterials show promise as efficient, low‐cost catalysts for alkaline electrolyzers.     

Electrochemical and Electrocatalytic Properties of Imidazole Analogues of the Redox Cofactor Pyrroloquinoline Quinone

The electrochemical and electrocatalytic properties of two synthetic imidazole analogues of the redox cofactor pyrroloquinoline quinone (PQQ) were evaluated. Cyclic voltammetry measurements as a function of pH indicated that both 4,5‐dihydro‐4,5‐dioxo‐1H‐imidazolo[5,4‐f]quinoline‐7,9‐dicarboxylic acid ( 1 ) and 4,5‐dihydro‐4,5‐dioxo‐2‐methyl‐1H‐imidazolo[5,4‐f]quinoline‐7,9‐dicarboxylic acid ( 2 ) undergo a reversible reduction of the o‐quinone moiety below pH 8 with potentials slightly more positive than those observed for PQQ. Upon incorporation into a polypyrrole membrane on the tip of a glassy carbon electrode, 1 and 2 exhibited electrocatalytic properties sufficient for the indirect amperometric detection of cysteine. The response for cysteine was linear up to 1 mM over a wide pH range. Detection limits (S/N=3) were in the μM range and dependent on the solution pH. Interference from redox active species such as dopamine and uric acid were minimized by the pH‐dependent redox potentials of 1 and 2 and thus the ability to tune the detection potential.     

Flower-like Fe-Co-M (M=S,O, P and Se) Nanosheet Arrays Grown on Nickel Foam as High-efficiency Bifunctional Electrocatalysts

The development of highly efficient, inexpensive, abundant and non-precious metal electrocatalysts is the lifeblood of the hydrogen production industry, especially the hydrogen production industry by electrolysis of water. A Fe-Co-S/NF bifunctional electrocatalyst with nanoflower-like structure was synthesized on three-dimensional porous nickel foam through one-step hydrothermal and one-step high-temperature sulfuration operations, and the material displays high-efficiency electrocatalytic performance. As a catalyst for the hydrogen evolution reaction, Fe-Co-S/NF can drive a current density of 10 mA/cm² at an overpotential of 143 mV with a Tafel slope of 80.2 mV/dec. When it was used as an oxygen evolution reaction catalyst, it exhibits good OER reactivity with a low Tafel slope (82.6 mV/dec) and with requiring only 117 mV overpotential to drive current densities up to 50 mA/cm². In addition, the Fe-Co-S/NF//Fe-Co-S/NF electrolytic cell was assembled, an electrolysis voltage of 1.64 V is required to drive a current density of 50 mA/cm², which is one of the most active catalysts reported so far. This work indicates that the introduction of S, P and Se treating processes could effectively improve electrical conductivity of the material and enhance the catalytic activity of the material. This work offers an effective and convenient method for improving the morphology of the catalyst, increasing the surface area of the catalyst and developing high-efficiency and low-cost catalysts.     

Efficient Hydrogen Oxidation Catalyzed by Strain-Engineered Nickel Nanoparticles

The hydroxide-exchange membrane fuel cell (HEMFC) is a promising energy conversion device. However, the development of HEMFC is hampered by the lack of platinum-group-metal-free (PGM-free) electrocatalysts for the hydrogen oxidation reaction (HOR). Now, a Ni catalyst is reported that exhibits the highest mass activity in HOR for a PGM-free catalyst as well as excellent activity in the hydrogen evolution reaction (HER). This catalyst, Ni-H₂-2 %, was optimized through pyrolysis of a Ni-containing metal-organic framework precursor under a mixed N₂/H₂ atmosphere, which yielded carbon-supported Ni nanoparticles with different levels of strains. The Ni-H₂-2 % catalyst has an optimal level of strain, which leads to an optimal hydrogen binding energy and a high number of active sites.     

Conductive and Elastic TiO2 Nanofibrous Aerogels: A New Concept toward Self-Supported Electrocatalysts with Superior Activity and Durability

Recently, various titanium dioxide (TiO₂) nanostructures have received increasing attention in the fields of energy conversion and storage owing to their electrochemical properties. However, these particulate nanomaterials exclusively exist in the powder form, which may cause health risks and environmental hazards. Herein we report a novel, highly elastic bulk form of TiO₂ for safe use and easy recycling. Specifically, TiO₂ nanofibrous aerogels (NAs) consisting of resiliently bonded, flexible TiO₂ nanofibers are constructed, which have an ultralow bulk density, ultrahigh porosity, and excellent elasticity. To promote charge transfer, they are subjected to lithium reduction to generate abundant oxygen vacancies, which can modulate the electronic structure of TiO₂, resulting in a conductivity up to 38.2 mS cm⁻¹. As a proof-of-concept demonstration, the conductive and elastic TiO₂ NAs serve as a new type of self-supported electrocatalyst for ambient nitrogen fixation, achieving an ammonia yield of 4.19×10⁻¹⁰ mol s⁻¹ cm⁻² and a Faradaic efficiency of 20.3 %. The origin of the electrocatalytic activity is revealed by DFT calculations.