壳聚糖固体聚合物电池用膜

壳聚糖是甲壳素脱乙酰基的产物，具有良好的成膜性、生物相容性、环保以及价格低廉等特点。作为一种碱性高分子膜材料，近年来已成为聚电解质研究领域中的研究热点。本文综述了壳聚糖固体聚合物电池用膜的研究现状，其改性工艺主要包括共混、化学改性、质子酸掺杂、无机盐掺杂等方法，比较了各种工艺处理后壳聚糖固体聚合物电解质膜的性能差异，并就壳聚糖固体聚合物电解质膜中离子传导机理中有待解决的问题进行探讨，并提出了进一步改进壳聚糖固体聚合物电解质膜性能的研究思路。     

测接触角法确定偶联剂的最佳用量

偶联剂是一类能在无机填料和聚合物基材之间形成“分子桥”、改善两者之间相容性或提高两者之间相互作用能力的化合物。将经偶联剂改性的无机填料填充到聚合物中可以制得成本低、性能好的复合材料。由于偶联剂用量多少将对复合材料的性能产生较大影响,因此建立一种准确、简便地确定偶联剂最佳用量的方法有着十分重要的理论和实际应用意义。     

Photobioelectronic studies with thylakoid membranes

The research described in this paper presents a method for chemically modifying the surface of plant photosynthetic membranes in such a way that electrical contact can be made. Colloidal platinum was prepared, precipitated directly onto thylakoid membranes from aqueous solution, and entrapped on fiberglass filter paper. This composition of matter was capable of sustained simultaneous photoevolution of hydrogen and oxygen when irradiated at any wavelength (400–700 nm) in the chlorophyll absorption spectrum. Experimental data support the interpretation that part of the platinum metal catalyst is precipitated adjacent to the photosystem-I reduction site of photosynthesis and that electron transfer occurs across the interface between photosystem I and the catalyst. When contacted with metal electrodes, the thylakoid-platinum combination was capable of generating a sustained flow of current through an external load resistor. Procedures for preparing this material and experimental data on its catalytic and electronic properties are presented. Also presented is an analysis of the flow of photocurrent in terms of the interfacial electron transfer reactions that occur at the interfaces of the components of the assembly.     

Electrokinetic and contact angle measurements of grafted carbon fibers

 The grafting method that has successfully been applied to methacrylic acid and liquid crystalline monomers was expanded to prepare amphoteric carbon fiber surfaces using 2-(N,N-dimethylamino)ethyl methacrylate as monomer. The obtained carbon fiber surfaces were characterized by contact angle and ζ-potential measurements. The expected basic behavior was not observed, instead an amphoteric character of the modified carbon fiber surface was found. The fiber surfaces display a basic character in the acidic pH-range, while they are acidic in the alkaline part of the pH-scale. An important influence is derived from the amount of initiator used to graft the monomers onto the fibers. The smaller the initiator concen-tration used during polymerization, the larger the amount of amino functionalities introduced to the carbon fiber surface. The wetting behavior versus water depends on the overall conformation of the immobilized polymer. During immersion into water the polymer acts hydrophobic, while during emersion, a hydrophilic character is observed, probably derived from conformational changes and swelling during the contact angle measure-ments in water. Received: 9 June 1998 Accepted: 13 August 1998     

Surface solid-state interactions in copper-nickel-cement catalysts for hydrogenation of oxygen

The surface phase composition of alumocalcium cement-supported CuO and CuO-NiO catalysts prepared by chemical mixing has been studied using the method of thermo-vacuum curves of electric conductivity. The deactivation of these catalysts due to overheating to 800 °C under conditions of hydrogenation of oxygen is rationalized by the partial extraction of CuO (and NiO) from the stabilizing structure of the support solid solutions and by sintering of the extracted oxides and the reduced metallic phase. Complete regeneration of the CuO-NiO-talum catalysts can be achieved if a considerable amount (20%) of copper hydroxocarbonate is added.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1559–1562, September, 1994.     

A novel approach to study the isothermal behaviour of substances after 0.01–1 s from the chemical process initiation

New modifications of a contact heater are suggested for investigating thermal decomposition processes, as well as for determining kinetic characteristics of substances under conditions of intense heating to a fixed constant temperature.

---

Zusammenfassung Zur Untersuchung von thermischen Zersetzungsprozessen und der Bestimmung der Reaktionskinetik von Substanzen bei intensivem Erhitzen auf vorgegebene konstante Temperaturen wird eine neue Abart von Kontakterhitzern beschrieben.

     

Diffusion current on a nonuniform electrode: Calculation with integral equations

Identity of mathematical problems concerning calculation of the distribution of reactants’ concentrations and the current near the surface of a nonuniform (strip) electrode and distribution of displacements and forces in the case of an elastic layer “antiplane” deformation caused by the punch action. Formulas for calculating the current at a strip electrode are derived for various ratios between the electrode width and the diffusion layer thickness by means of asymptotic methods designed for calculating problems of mechanical contact interactions. It is noted that calculations of the diffusion current for involved activity distributions at the electrode surface may benefit from asymptotic methods of mechanics of contact interactions.     

Contributions of restructuring and oxidation to the aging of the surface of plasma polymers containing heteroatoms

The properties and composition of plasma polymer surfaces stored in air can change considerably over time, especially as a result of oxidative reactions. When plasma polymers contain an element other than O, it is possible to probe for mechanisms in addition to oxidation that contribute to the aging of the surface. Plasma polymers containing N were fabricated from either 1,3-diaminopropane (DAP),n-heptylamine (nHA), or allylamine (AA), and studied by X-ray photo-electron spectroscopy (XPS) and air/water contact angles (CA). For each of the plasma polymers, a multiexponential increase in the O/C ratio was observed over time using XPS. The N/C ratios remained constant (AA) or decreased somewhat (nHA and DAP). In contrast, the trends in CA values differed, declining for the nHA surfaces, rising for the AA, and changing little for the DAP. Surface roughness, assessed by scanning tunnelling or atomic force microscopy, did not change over time. The diverse adjustments in the polarity of each surface and the similar compositional changes between them are reconcilable if the aging of the plasma polymer surface is a manifestation of the superposition of concurrent oxidative reactions and partial surface reorientation; the former introduce polar groups and the latter transports then from the surface to deeper regions beyond the CA probe depth but within the XPS analysis depth. These processes vary between different plasma polymers. Data for the alkylamine plasma polymers is also compared with that for two plasma polymers fabricated from methanol. The change in composition, but not polarity, of the DAP surface after 4 days of storage demonstrates the importance of using multiple techniques to characterize the aging of plasma polymer surfaces.     

All-solid-state potentiometric sensors for ascorbic acid by using a screen-printed compatible solid contact

The development of all-solid-state potentiometric ion selective electrodes for monitoring of ascorbic acid, by using a screen-printed compatible solid contact is described. The applied methodology is based on the use of PVC membrane modified with some firstly-tested ionophores (triphenyltin(IV)chloride, triphenyltin(IV)hydroxide and palmitoyl-l-ascorbic acid) and a novel one synthesized in our laboratory (dibutyltin(IV) diascorbate). Synthesis protocol and some preliminary identification studies are given. A conductive graphite-based polymer thick film ink was used as an internal solid contact between the graphite electrode and the PVC membrane. The presence and the nature of the solid contact (plain or doped with lanthanum 2,6-dichlorophenolindophenol (DCPI)) seem to enhance the analytical performance of the electrodes in terms of sensitivity, dynamic range, and response time. The analytical performance of the constructed electrodes was evaluated with potentiometry, constant-current chronopotentiometry and electrochemical impedance spectroscopy (EIS). The interference effect of various compounds was also tested. The potential response of the optimized Ph₃SnCl-based electrode was linear against ascorbic acid concentration range 0.005-5.0 mM. The applicability of the proposed sensors in real samples was also tested. The detection limit was 0.002 mM ascorbic acid (50 mM phosphate, pH 5 in 50 mM KCl). The slope of the electrodes was super-Nernstian and pH dependent, indicating a mechanism involving a combination of charge transfer and ion exchange processes. Fabrication of screen-printed ascorbate ISEs has also been demonstrated.