基于Windows CE的线路巡检系统

首先讨论了现有线路巡检模式的不足，然后提出了利用windows CE来构建线路巡检系统。分析了该系统的硬件平台之后，提出了线路巡检系统的体系结构，阐述了该系统应具有的软件功能。在实际应用中表明，该系统在线路巡检中有较强的推广价值。     

The role of binder mobility in spontaneous adhesive contact and implications for cell adhesion

The standard view of mechanical adhesive contact is as a competition between a reduction in free energy when surfaces with bonding potential come into contact and an increase in free energy due to elastic deformation that is required to make these surfaces conform. An equilibrium state is defined by an incremental balance between these effects, akin to the Griffith crack growth criterion. In the case of adhesion of biological cells, the molecules that tend to form surface-to-surface bonds are confined to the cell wall but they are mobile within the wall, adding a new phenomenon of direct relevance to adhesive contact. In this article, the process of adhesive contact of an initially curved elastic plate to a flat surface is studied for the case in which the binders that account for adhesion are able to migrate within the plate. This is done by including entropic free energy of the binder distribution in the total free energy of the system. By adopting a constitutive assumption that binders migrate at a speed proportional to the local gradient in chemical potential, the transient growth of an adhesion zone due to binder transport is analyzed. For the case of a plate of very large extent, the problem can be solved in closed form, whereas numerical methods are invoked for the case of a plate of limited extent. Results are presented on the rate of growth of an adhesion zone in terms of system parameters, on the evolution of the distribution of binders and, in the case of a plate of limited extent, on the long-term limiting size of the adhesion zone.     

显微镜产品质量光电检测的研究

显微镜产品质量光电检测的实施是光、机、光电、计算机技术的综合运用。本文是笔者多年来研究成果总结，包括了已研制出的ＸＪ－１型生物显微镜多功能光电质检仪及其改进；对显微镜离焦性能检测的探索，共可实现显微镜产品质量七个考核项目的检测与等级分拣。这些成果给显微镜行业提供了先进的检测工具；同时为发展我国显微镜产品检测技术、提高检测水平起积极的促进作用。     

一维接触过程的光滑性与稳定性

本文证明了一维接触过程在适当的小扰动下，其极点平稳分布除在临界点λ＿ｃ处外总是光滑的．特别，一维接触过程本身的极点平稳分布关于其参数除在临界点处外总是光滑的．     

Atom transfer radical polymerization directly from poly(vinylidene fluoride): Surface and antifouling properties

The direct preparation of grafting polymer brushes from commercial poly (vinylidene fluoride) (PVDF) films with surface‐initiated atom transfer radical polymerization (ATRP) is demonstrated. The direct initiation of the secondary fluorinated site of PVDF facilitated grafting of the hydrophilic monomers from the PVDF surface. Homopolymer brushes of 2‐(N,N‐dimethylamino)ethyl methacrylate (DMAEMA) and poly (ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the PVDF surface. The chemical composition and surface topography of the graft‐functionalized PVDF surfaces were characterized by X‐ray photoelectron spectroscopy, attenuated total reflectance/Fourier transform infrared spectroscopy, and atomic force microscopy. A kinetic study revealed a linear increase in the graft concentration of poly[2‐(N,N‐dimethylamino)ethyl methacrylate] (PDMAEMA) and poly[poly(ethylene glycol) monomethacrylate] (PPEGMA) with the reaction time, indicating that the chain growth from the surface was consistent with a controlled or living process. The living chain ends were used as macroinitiators for the synthesis of diblock copolymer brushes. The water contact angles on PVDF films were reduced by the surface grafting of DMAEMA and PEGMA. Protein adsorption experiments revealed a substantial antifouling property of PPEGMA‐grafted PVDF films and PDMAEMA‐grafted PVDF films in comparison with the pristine PVDF surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3434–3443, 2006     

环形线电荷的电场分布

给出了圆环形线电荷电场分布的理论公式，并利用计算机计算出其具体分布规律。     

Ohmic contact and transport properties of II–VI Green/Blue laser diodes

The employment of the Zn(Se,Te) pseudo-graded contacting scheme to p-type ZnSe-based alloys contributes directly to the recent demonstration of room temperature continuous-wave operation of II– VI green-blue laser diodes. Contact ohmicity is maintained down to cryogenic temperatures which enabled the investigation of electrical transport properties associated with the p-type nitrogen-doped ZnSe, Zn(S,Se), and (Zn,Mg)(S,Se). The observation of both persistent photoconductivity and a metastable population of holes which are in thermodynamic equilibrium with hydrogenic acceptors having reduced activation energy suggests the presence of a DX-like behavior for holes in p-type (Zn,Mg)(S,Se).     

单晶硅化物及其应用

本文评述了单晶CoSi_2和NiSi_2的结构特点、各种制备方法、器件应用和发展前景。采用分子束外延(MBE)和“内延”法(Mesotaxy)制备的单晶硅化物质量,电学性能和热稳定性较好。由于首次得到理想的突变的金属——半导体接触,使对金属——半导体接触的理论分析成为可能。硅/单晶硅化物/硅结构在实际应用中非常重要,如单晶硅化物作集电极埋层,能降低集电极串联电阻,克服重掺杂埋层的横扩和自掺杂问题,提高了电路工作速度,减小了器件面积。埋层硅化物也可作为微波传输线的地线,是实现高频集成电路互连的好方法。而采用该结构制备的高速器件——金属基区晶体管(MBT)和穿透基区晶体管(PBT),具有很好的应用前景。     

Influence of hydrogen bonding on the properties of water molecules adsorbed in zeolite frameworks

Three hydrated aluminosilicate frameworks—LiABW, NaNAT, and BaEDI—are partly optimized with the periodic Hartree–Fock CRYSTAL95 code. In particular, we optimized the positions of the adsorbed water molecules including the positions of the framework cations (ABW, NAT) or part of the framework atomic positions (ABW). This allowed us to compare cation–water clusters in the gas and adsorbed states and discuss the influence of hydrogen bonding to the framework oxygen atoms or to the neighbor water molecules on the atomic properties (quadrupole coupling constant, anisotropy of electric field gradient) of the adsorbed water molecules. The LiBIK structure obtained from X‐ray diffraction is also considered to illustrate the hydrogen bonds occurring between adsorbed water molecules. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003