A micro/nanocasting method for replicating soft micro/nanosurface structures using a dynamic electrical field

We propose a new electric field-induced micro/nanocasting method to replicate soft patterns using micro/nanocasting techniques without pressure. The process uses an alternating current (AC) electrical field and rotation of one electrode, generating a dynamic electrical field that induces electrokinetic flow motion in a dielectric solution (polydimethylsilane, PDMS). We used a lotus leaf as a replication template and characterised the PDMS flow motion to observe the effects of various process parameters (e.g., electrical field strength, rotation speed of an electrode, and electrode shape). The unstable flow motion was significantly dependent on the processing parameters, especially the rotation speed of the electrode. Using the optimised processing conditions, the replication efficiency was about 88%. We believe that this method has potential for fabricating soft micro/nanosized structures.     

Highly polarized luminescence from an AIEE-active luminescent liquid crystalline film

Luminescent liquid crystals (LLCs) have attracted significant interest for organic optoelectronic applications, especially for the generation of linear polarized light. Here, a novel LLC molecule, 2-(4-(nonanealkoxy)phenyl)-3-(4-formamidephenyl)-acrylonitrile (CN-NPFA), is reported, which shows strong fluorescence in the solid state due to the aggregation-induced enhanced emission (AIEE) effect. Moreover, a well-aligned liquid crystalline film using AIEE-active molecules, is obtained using an in-plane electric field with an alignment layer. It exhibits highly polarized luminescence (ρ = 0.74) with a high fluorescence quantum yield. The device is both cheap and easy to fabricate, and has the potential to be used in practical electro-optic applications.     

Insight into industrial PLA aging process by complementary use of rheology,HPLC, and MALDI

Nowadays, there is a growing availability of biodegradable industrial materials intended to food contact applications whose service life behavior needs to be further investigated. This article is focused on the degradation of two materials based on polylactic acid. The correlation between the rate of degradation and the amount of trapped degradation products was investigated applying three characterization techniques in parallel, namely rheology, high‐performance liquid chromatography (HPLC), and matrix‐assisted laser desorption/ionization (MALDI). The rate of degradation was studied through the evaluation of their rheological properties and calculation of the number of average molecular weights, and weight‐average molecular weights. Water‐soluble oligomers and lactic acid were quantified by HPLC‐ultraviolet. Changes in cyclic and linear oligomers were monitored by MALDI‐time‐of‐flight mass spectrometry. Specimens of 4‐mm thickness of each biopolymer were subjected to hydrolysis in deionized water up to 6 months at two temperatures, simulating service conditions of food packaging. The diminution in viscosity and consequently in molecular weight distribution (20–60%) showed the degradation of the molecular structure of both polylactic acids. The chain scission was followed through the increasing values of lactic acid and hydrolyzed oligomers (twofold to eightfold), and the predominant signal of the linear oligomers over the cyclic ones with aging. Rheology, HPLC, and MALDI showed to be complementary tools to better understand the changes in the molecular structure. The obtained results showed the necessity of adding suitable stabilizers for each particular food packaging application. Copyright © 2013 John Wiley & Sons, Ltd.     

Ethylenically unsaturated polycarbosiloxanes for novel silicone hydrogels: synthesis,end‐group analysis,contact lens formulations,and structure–property correlations

A series of novel mono‐ethylenically unsaturated polycarbosiloxanes macromonomers as compatibilizer materials for soft silicon hydrogels were prepared from the anionic ring‐opening polymerization (AROP) of 2,2,5,5‐tetramethyl‐2,5‐disila‐1‐oxacyclopentane followed by methacrylation. The characterization was performed by end‐group analysis and included the determination of molecular weight, molecular weight distributions, end‐group functionality, and impurity profiles using gas chromatography‐mass spectrometry, gel permeation chromatography, nuclear magnetic resonance, and matrix‐assisted laser desorption/ionization time of flight mass spectrometry. The synthetic procedure was optimized to minimize the formation of any dimer that would have the potential to act as a low molecular weight cross linker. In addition, the novel di‐ethylenically unsaturated polycarbosiloxanes were synthesized by cationic polymerization. Use of these silicone derivatives was explored in the formulation of contact lenses, and the structure–property relationship was examined. When copoymerized with hydrophilic monomers, these were able to give transparent and wettable films with desired properties, particularly a low moduli for contact lenses. Contact lens with high modulus is often shown to impart a higher degree discomfort when worn upon the eye. It was clear from the structure–property relationship that the modulus and the tensile strength of the formulated material depend on the nature and length of the polycarbosiloxane used and may be tuned for the purpose as needed. Copyright © 2013 John Wiley & Sons, Ltd.     

Nuclear Structure and Electromagnetic Transitions Investigation in Er Isotopes within Framework of Interacting Boson Model

Interacting Boson Model-2(IBM-2)is used to determine the Hamiltonian for Er nuclei.Fit values of parameters are used to construct the Hamiltonian,energy levels and electromagnetic transitions(B(E2),B(M1))multipole mixing ratios(δ(E2/M1))for some even-even Er nuclei and monopole transition probability are estimated.New ideas are used for counting bosons number at N=64 and results are compared with previous works.     

Non‐contact evaluation of the electrical conductivity of thin metallic films by eddy current microscopy

An eddy current microscopy technique to evaluate the electrical conductivity of thin metallic films in a non‐contact manner is reported. A narrow track formed in an approximately 100 nm thick Au film was prepared, and a Co–Cr coated magnetic tip was driven to oscillate above the track both with and without current passing through the track. Despite the absence of current, the electromagnetic interaction between the tip and the stray magnetic field from the track gave rise to a phase delay in the probe. This was due to an eddy current being induced within part of the track. Moreover, measurements of the phase change in the probe oscillation for different metallic films with thicknesses of about 100 nm found this to be proportional to the electrical conductivity of the film. Finally, the electrical conductivity of an Al film was evaluated using the eddy current microscopy technique. Copyright © 2012 John Wiley & Sons, Ltd.     

Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

Polymer-dispersed liquid crystal composites for bio-applications: thermotropic,surface and optical properties

Polymer-dispersed liquid crystal (PDLC) systems based on polysulfone as carrying matrix and 4-cyano-4?-pentylbiphenyl (5CB) liquid crystal (LC) were obtained as thin transparent films. The PDLC films were prepared by solvent- and thermally induced phase separation methods, with various compositions in the two components. Information on the phase separation was obtained by polarised light optical microscopy, differential scanning calorimetry and scanning electron microscopy. The PDLC composites show well-defined droplets of submicrometric size, around 650 nm for a medium content of LC and around 250 nm for a low one. The droplets show a radial configuration and a homeotropic alignment of the LC molecules within. By contact angle measurement and surface free energy calculations, it was established that self-assembling of aliphatic units of the two composite components, at droplet interface, is the driving force of the homeotropic alignment. Moreover, these data indicated the potential biocompatibility of the studied composites. The photophysical behaviour shows a better light emission of the PDLCs containing bigger droplets.