Direct modulation and optical confinement factor modulation of semiconductor lasers

Abstract

A method for modulation of semiconductor lasers is demonstrated. The method is based on the modulation of the optical confinement factor. Using this method an enhanced—3-dB bandwidth is observed in agreement with the small signal rate equation analysis. A modulation response that drops at high frequencies slower than the conventional direct current modulation response is achieved. This supports the theoretical predictions, showing an intrinsic 1/f decay rate for the optical confinement factor modulation scheme versus an intrinsic 1/f² decay for direct modulation.     

INVESTIGATION OF A QUASI-STEADY LIQUID CRYSTAL TECHNIQUE FOR FILM COOLING HEAT TRANSFER MEASUREMENTS

A quasi-steady technique to simultaneously measure the local heat transfer coefficient and cooling effectiveness on surfaces involving film cooling situations is investigated. The method employs a composite slab consisting of a very thin laminate layer of low-thermal-conductivity material superposed upon a highly conductive metal substrate. The resulting heat transfer in the thin laminate is described by one-dimensional conduction. A very thin coating of thermochromic liquid crystals sprayed onto the surface of the laminate is used in conjunction with a computer image processing procedure to provide local surface temperature data. This information, combined with the substrate and mainstream gas temperatures, provides highly detailed (90 video pixels/cm²) local convection heat transfer distributions. The method is used to conduct flat-plate film cooling experiments consisting of a single row of discrete holes inclined at 35 to the mainstream flow. The local surface temperature is influenced by the combination of two interacting fluid streams at different temperatures. A numerical analysis was performed to assess the assumptions underlying the data reduction procedure. The experimental uncertainty of 7% in the heat transfer coefficient is comparable to prior studies. Furthermore, the uncertainty of 5% in the film cooling effectiveness, coupled with the negligible lateral conduction errors, indicates the present technique offers a unique capability for accurate measurement of the local film cooling effectiveness.     

Throughput-based fair bandwidth allocation in OBS networks

Fair bandwidth allocation (FBA) has been studied in optical burst switching (OBS) networks, with the main idea being to map the max-min fairness in traditional IP networks to the fair-loss probability in OBS networks. This approach has proven to be fair in terms of the bandwidth allocation for differential connections, but the use of the ErlangB formula to calculate the theoretical loss probability has made this approach applicable only to Poisson flows. Furthermore, it is necessary to have a reasonable fairness measure to evaluate FBA models. This article proposes an approach involving throughput-based-FBA, called TFBA, and recommends a new fairness measure that is based on the ratio of the actual throughput to the allocated bandwidth. An analytical model for the performance of the output link with TFBA is also proposed.     

White and some colored marbles as alternative radiation shielding materials for applications

ABSTRACT

In this paper, the radiation shielding parameters such as linear attenuation coefficients (LAC, µ), mass attenuation coefficients (MAC, µ/ρ), effective atomic numbers (Z_eff), effective electron densities (N_eff), half value of layers (HVL), mean free paths (MFP) and buildup factors (exposure (EBF) and energy absorption (EABF)) were investigated for cream (M1), pink (M2), white (M3), maroon (M4) and green (M5) marbles. Attenuation coefficients were measured in the energy region 31.18–661.66 keV photon energies. The values of Z_eff and N_eff were then calculated using these coefficients with logarithmic interpolation method, and HVLs and MFPs were calculated using the values of LAC of marble samples at the same photon energies. The experimental results were compared with the theoretical values obtained from WinXCom program, and good agreements were observed between the experimental and theoretical results. HVLs and MFPs of all marble samples were compared with those of some concretes, glasses and commercial radiation shielding glasses (SCHOTT Co.). The studied marbles were better radiation shielding materials than standard shielding concretes due to lower HVL and MFP values lower than the ordinary concrete. Finally, EBFs and EABFs of the marbles were calculated in the energy region 0.015–1?MeV up to penetration depths of 40 mfps by Geometric Progression method (G-P), and the results were discussed in terms of photon energies and chemical compositions of the marbles.     

Investigating the Dynamic Viscoelasticity of Single Polymer Chains using Atomic Force Microscopy

In single‐molecule force spectroscopy (SMFS), many studies have focused on the elasticity and conformation of polymer chains, but little attention has been devoted to the dynamic properties of single polymer chains. In this study, we measured the energy dissipation and elastic properties of single polystyrene (PS) chains in toluene, methanol, and N,N‐dimethylformamide using a homemade piezo‐control and data acquisition system externally coupled to a commercial atomic force microscope (AFM), which provided more accurate information regarding the dynamic properties of the PS chains. We quantitatively measured the chain length‐dependent changes in the stiffness and viscosity of a single chain using a phenomenological model consistent with the theory of viscoelasticity for polymer chains in dilute solution. The effective viscosity of a polymer chain can be determined using the Kirkwood model, which is independent of the intrinsic viscosity of the solvent and dependent on the interaction between the polymer and solvent. The results indicated that the viscosity of a single PS chain is dominated by the interaction between the polymer and solvent. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1736–1743     

How computational methods and relativistic effects influence the study of chemical reactions involving Ru‐NO complexes?

Two treatments of relativistic effects, namely effective core potentials (ECP) and all‐electron scalar relativistic effects (DKH2), are used to obtain geometries and chemical reaction energies for a series of ruthenium complexes in B3LYP/def2‐TZVP calculations. Specifically, the reaction energies of reduction ( A ‐ F ), isomerization ( G‐I ), and Cl⁻ negative trans influence in relation to NH₃ ( J ‐ L ) are considered. The ECP and DKH2 approaches provided geometric parameters close to experimental data and the same ordering for energy changes of reactions A ‐ L . From geometries optimized with ECP, the electronic energies are also determined by means of the same ECP and basis set combined with the computational methods: MP2, M06, BP86, and its derivatives, so as B2PLYP, LC‐wPBE, and CCSD(T) (reference method). For reactions A ‐ I , B2PLYP provides the best agreement with CCSD(T) results. Additionally, B3LYP gave the smallest error for the energies of reactions J ‐ L . © 2017 Wiley Periodicals, Inc.     

基于物理课堂有效教学的策略浅析

根据有效教学的理念提出了课堂有效教学的基本策略、动力策略和长效策略,并结合基础物理的教学,对这些教学策略的科学掌握和运用进行了探讨.     

210Pb in magnesium dietary supplements

The idea behind this study was to investigate the most popular magnesium dietary supplements as a potential additional source of ²¹⁰Pb in the human diet. The paper presents the results of ²¹⁰Pb activities determined in different magnesium supplements, as well as an estimation of the annual effective radiation doses from ²¹⁰Pb decay. The results showed that the highest value of ²¹⁰Pb activity was found in a magnesium supplement of natural origin (dolomite) with a value of 2.97?±?0.18 mBq g^–1. The highest annual radiation dose from ²¹⁰Pb obtained from the magnesium daily recommended value (0.4 g of pure Mg) was calculated for dolomite tablets as 3.71?±?0.02 µSv·year^–1.     

面向LTE深度覆盖的PTN接入层网络演进

随着LTE网络覆盖推向深入， PTN接入层网络的承载压力越来越大，本文通过详细分析不同场景的业务带宽需求，结合网络实际，提出PTN接入层网络演进模型，为PTN接入层规划和建设提供了重要的借鉴和参考。     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.