A rate-dependent algebraic stress model for turbulence

Based on the stress transport model, a rate-dependent algebraic expression for the Reynolds stress tensor is developed. It is shown that the new model includes the normal stress effects and exhibits viscoelastic behavior. Furthermore, it is compatible with recently developed improved models of turbulence. The model is also consistent with the limiting behavior of turbulence in the inertial sublayer and is capable of predicting secondary flows in noncircular ducts. The TEACH code is modified according to the requirements of the rate-dependent model and is used to predict turbulent flow fields in a channel and behind a backward-facing step. The predicted results are compared with the available experimental data and those obtained from the standard k-ε and algebraic stress models. It is shown that the predictions of the new model are in better agreements with the experimental data.     

Dynamic Survivability in WDM Mesh Networks Under Dynamic Traffic

Network survivability is a crucial requirement in WDM mesh networks. In this paper, we systematically consider the problem of dynamic survivability with dynamic single link failure in WDM networks under dynamic traffic demands. Specifically, we investigate various protection schemes, such as dedicated path protection (DPP), shared path protection (SPP), dedicated link protection (DLP), shared link protection (SLP), and two restoration schemes, path restoration (PR) and link restoration (LR). Moreover, two new shared protection methods are proposed, i.e., SRLG-based shared link protection (SRLG-SLP) and SRLG-based shared path protection (SRLG-SPP). The SRLG (shared risk link group) constraint defines the availability of protection resources to a working path, which requires that any two working paths sharing the same risk of failure (or in the same SRLG) cannot share the same protection resources. Furthermore, in our study, we consider a more practical dynamic single-link failure model, in which the link-failure-interarrival time and link-failure-holding time are considered as two independent parameters. Based on this link-failure model, extensive simulations are done to analyze and compare the dynamic survivable performance of various protection and restoration schemes. Resource utilization, protection efficiency, restoration efficiency, and service disruption ratio are employed as survivable performance metrics versus traffic load, link-failure frequency, and link-failure reparation time to evaluate the survivable performance. Many meaningful results are given. In addition, we show that the developed SRLG-SLP and SRLG-SPP protection schemes perform very well in terms of protection efficiency and service disruption ratio, while sacrificing some performance in terms of resource utilization.     

Distributed Speech Recognition Systems and Some Key Factors Affecting It''''s Performance

1　IntroductionWiththerapiddevelopmentofInternetandmobilecommunications,theresearchonwirelessmobilenetworkshasbecomethenewhotspotinin formationtechnologyfield .Asweknow ,mobileterminals (mobilephone,forexample)arethetooltohelppeopletoaccessanyinformationtheyneedbyanymediaatanytimeandanywhere .However,itissometimesdifficultformobileterminalstoplaysucharolebecauseofthelimitationssuchaslimitedca pacity ,lowpower,andinconvenienceinoperating .So,peoplehopetofindanotherwaytoaccessnet workinformatio…     

环境因子的定义及研究现状

从普遍接受的三个基本假设出发，讨论环境因子的定义和失效机理不变的约束条件，重点综述环境因子的研究现状和常用方法，并探讨引入反应论模型解决环境因子预测问题的可能途径。     

青岛港货运吞吐量的时间序列模型

运用时间序列分析方法对时间序列建立ARMA,ARIMA模型.搜集了青岛港1999年1月～2003年5月的货运吞吐量数据,对进行分析,建立了青岛港货运吞吐量的模型.通过预留的部分数据对模型进行检验,并对模型的残差进行检验,得出模型比较合理.     

最大似然方法和Bayes方法在结构方程模型分析中的讨论(英文)

本文通过模拟研究,讨论了最大似然方法和Bayes方法在分析结构方程模型中的相似点和不同之处。     

承受拉-扭组合载荷的薄壁圆筒屈服时产生塑性流动的条件

提出了在无外力作功的情况下，具有Bauschinger效应的弹塑性材料处于屈服状态产生自发的塑性流动时应满足的条件．这个条件不仅与材料的力学性能有关，而且还处决于材料的具体的载荷边界条件和变形．举例说明了承受拉一扭组合的薄壁圆筒中，采用组合强化模型时，产生塑性流动的具体条件．     

Determination of the rheological behavior of epoxy–amine thermosets by dynamic mechanical analysis: Isothermal methods versus nonisothermal methods

The reticulation process of an epoxy resin using an amine as a cure agent was studied at different temperatures and concentrations of the cure agent with dynamic mechanical thermal analysis. The study was performed under both isothermal and nonisothermal conditions, and a temperature–time–transformation diagram was obtained. The measurements from the two modes gave similar results, although the nonisothermal mode required fewer experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1965–1977, 2003     

AGS能量下π~－π~－的Bose—Einstein关联

全同粒子间的玻色－爱因斯坦关联可以用来研究相对论性核碰撞中次级粒子源分布及有关的物理问题．本文用强子级联模型（ＨＣＭ）模拟２８Ｓｉ（１４．６ＡＧＣＶ／ｃ）＋Ａｕ反应，得到π－粒子的ｆｒｅｅｚｅ－ｏｕｔ状态，进而计算了π－π－关联函数，取得与实验一致的结果．还计算了ｆｒｅｅｚｅ—ｏｕｔπ－源的均方根线度，并讨论了它与拟合方法抽取的源参数间的关系．     

被Kerr介质包围的J—C模型中光场位相特性

本文应用Pegg-Barnett位相理论讨论了被Kerr介质包围的J-C模型中光场的位相性质。