任意高差的多档输电线动刚度理论建模

针对目前多档输电线动力特性研究中存在的不足,将任意一档导线视为子结构并基于现有的索振动理论获得了其动张力;利用相邻两档导线的动张力建立了悬垂绝缘子串绕其悬挂点摆动的动力学方程;综合每一档导线的振动方程以及悬垂绝缘子串的摆动方程建立了两档及三档输电线的动力学方程,求解得到由端部位移激励产生的动刚度;通过对动刚度进行分析得到了多档输电线的固有频率以及模态的理论表达形式;建立了小高差的两档及三档导线的有限元模型,理论分析结果与有限元结果一致,验证了理论公式的正确性。本文提出的动刚度理论对于研究多档输电线的动态响应具有重要的应用价值。     

时间尺度上二阶拟线性阻尼动力方程的振动性分析

研究二阶拟线性时滞阻尼动力方程[a(t)|x^Δ(t)|^λ-1x^Δ(t)]^Δ+b(t)|x^Δ(t)|^λ-1x^Δ(t)+p(t)|x(δ(t))|^λ-1x(δ(t))=0的振动性,其中t ₀∈T,而T为任意时间尺度,考虑方程是非正则情形,即$\int^{∞}_{t_0}$[a^-1(s)e_-b/a(s,t₀)]^1/λ Δs < ∞。 通过引入广义Riccati变换,借助时间尺度上的有关理论,并结合不等式技巧,建立了该方程振动的一些新的充分条件,推广、改进并丰富了现有文献中的结果。     

Mechanistic model for the dielectric spectrum of a simple dielectric material

ABSTRACT

In this paper, we perform molecular dynamics simulations of a dielectric fluidic material composed of permanent molecular dipoles. The dielectric spectrum features two peaks at lower frequencies than the system phonon frequency. The primary peak is observed at all temperatures studied and shifts toward lower frequencies as the temperature decreases. During this shift, the secondary peak emerges with a higher peak frequency than the primary peak. The secondary peak amplitude increases as the temperature decreases. Both peaks are dependent on the wavevector; in the small wavevector regime, the primary peak is shifted to higher frequencies as the wavevector squared and the secondary peak amplitude increases as the wavevector increases, but shows no shift in frequency. From the polarisation balance equation, we propose a model for the dielectric spectrum. This captures the spectrum features, and we conjecture that the primary peak is due to dipole moment correlations (Debye-type) and the secondary peak is due to the correlation between the dipole moment and a microscopic local field.     

A Concise Method to Predict the Mean Dynamic Pressure on a Plunge Pool Slab

Hydrodynamic pressure exerted on a plunge pool slab by jet impingement is of high interest in high dam projects. The present study experimentally investigated the characteristics of pressure induced by a jet through a constant width flip bucket (CFB) and a slit flip bucket (SFB). A pressurized plane pipe was employed in the flume experiments to control the inlet velocities in the flip buckets. A concise method is proposed to predict the mean dynamic pressure field. Its implementation is summarized as follows: First, the position of the pressure field is determined by the trajectories of free jets, and to calculate its trajectories, an equation based on parabolic trajectory theory is used; second, the maximum mean dynamic pressure is obtained through dimensional analysis, and then the pressure field is established by applying the law of Gaussian distribution. Those steps are integrated into a concise computing procedure by using some easy-to-obtain parameters. Some key parameters, such as takeoff velocity coefficient, takeoff angle coefficient, and the parameter k2, are also investigated in this paper. The formulas of these coefficients are obtained by fitting the experimental data. Using the proposed method, the easy-to-obtain geometric parameters and initial hydraulic conditions can be used to calculate the maximum mean dynamic pressure on the slab. A comparison between experimental data and calculated results confirmed the practicability of this model. These research results provide a reference for hydraulic applications.     

连续梁在周期荷载下的动力稳定性简化分析方法

对于一般任意支撑的连续梁结构动力稳定性问题,已有的计算方法求解过程都很复杂,给工程设计带来极大的不便．本文提出了一个简化的分析方法,利用现有的商业软件,只需求得连续梁的自然频率及静力屈曲（失稳）荷载,就可容易得到结构的动力失稳区域,当考虑结构阻尼对不稳定区域的影响时,可将阻尼矩阵表达为Rayleigh阻尼的形式．研究结果表明：采用本文计算方法与已有的理论计算方法得到的连续梁主参数共振的不稳定边界非常吻合,而本文计算方法更为简单,计算结果可靠,计算精度高,可满足工程设计的需要．     

动态压缩下Zr基非晶合金失效释能机理

为研究Zr 基非晶合金动态压缩条件下的失效释能机理,采用力学试验机、霍普金森杆、高速摄影、差示扫描量热分析(differential scanning calorimetry, DSC)、扫描电镜(scanning electron microscope, SEM)等,得到了材料应力应变曲线、高速摄影图像、失效式样微观形貌及DSC 曲线,根据实验数据计算了材料的晶化激活能,并拟合了材料的JH-2(Johnson-Holmquist Ⅱ)模型,对材料动态失效过程进行有限元数值模拟。实验结果表明,压缩条件下材料为脆性断裂,断口处观察到典型的脉状纹样及液滴状结构,材料失效过程伴随着释能现象;数值模拟结果表明,材料裂纹局部的瞬时内能大于材料晶化激活能。动态压缩下材料的失效释能机理即为材料破碎释放储存的弹性势能,并导致材料局部晶化释能,释能强度与应变率成正相关。     

Triple Self‐Sorting in Constitutional Dynamic Networks: Parallel Generation of Imine‐Based CuI,FeII, and ZnII Complexes

Three imine‐based metal complexes, having no overlap in terms of their compositions, have been simultaneously generated from the self‐sorting of a constitutional dynamic library (CDL) containing three amines, three aldehydes, and three metal salts. The hierarchical ordering of the stability of the three metal complexes assembled and the leveraging of the antagonistic and agonistic relationships existing between the constituents within the constitutional dynamic network corresponding to the CDL were pivotal in achieving the sorting. Examination of the process by NMR spectroscopy showed that the self‐sorting of the Fe^II and Zn^II complexes depended on an interplay between the thermodynamic driving forces and a kinetic trap involved in their assembly. These results also exemplify the concept of “simplexity”—the fact that the output of a self‐assembling system may be simplified by increasing its initial compositional complexity—as the two complexes could self‐sort only in the presence of the third pair of organic components, those of the Cu^I complex.     

薄壁件加工系统动态响应分析

薄壁件在铣削加工中容易产生共振或变形,直接影响加工稳定性及加工精度。采用主轴-刀具-工件整体铣削系统连续梁模型,系统研究在动态铣削力作用下,刀具端部与工件端部的动态响应之间的相互影响关系以及对整体系统动态响应影响较大的薄壁件尺寸。结果表明,工件横截面高度对系统共振的影响较为明显,当高度尺寸较小时,工件的低频共振会通过动态铣削力直接反映到刀具端部的振动频响上。工件横截面底边宽度尺寸的增大虽然对共振频率的改变不太明显,但会导致激发出来的刀具共振幅度出现明显降低。研究成果可以为薄壁件铣削加工系统的稳定性控制提供理论基础。     

山地输电线动刚度计算及模态分析

为了揭示地形变化对连续档输电线动态特性的影响，本文提出了基于任意高差角的动刚度理论．首先将单档导线视为连续档导线的子结构，构建了两悬挂点不等高的单档导线振动方程，并在该理论方程中引入了二次项，能够考虑重力沿弦向分量的影响，推导出绝缘子串绕其悬挂点转动的动刚度计算方法，通过动刚度理论研究连续档导线横向振动模态和频率，并应用有限元软件ABAQUS 验证理论模态和频率公式的准确性．所得结果表明，动刚度的计算方法具有较高的精度，理论模态与有限元输出结果吻合较好，同时获得的频率和模态可为山地高压输电线路防舞技术的研究提供依据．     

应力波和动光弹等差条纹的分析与判读

介绍了动光弹的基本原理，并从理论上回答了动光弹应用中的一些问题，如惯性力可否忽略等．并在总结回顾动光弹等差条纹级次判读方法的基础上，提出了把应力波理论与等差条纹分析判读相结合的方法，这样不仅使条纹判读的概念更清晰，而且可提高条纹分析和级次判读的准确性．