Numerical study of steady/unsteady flow and heat transfer in porous media using a characteristics-based matrix-free implicit FV method on unstructured grids

In this study, a high-resolution characteristic-based finite-volume (FV) method on unstructured grids [Int. J. Numer. Method Eng. 50 (2001) 11; Int. J. Heat Fluid Flow 21 (2000) 432] is extended by a matrix-free implicit dual-time stepping scheme for the numerical simulation of steady and unsteady flow and heat transfer with porous media. The method has been used to study the characteristics of a complex problem: flow and heat transfer in a channel with multiple discrete porous blocks, which was originally proposed by Huang and Vafai [J. Thermophys. Heat Transfer 8 (3) (1994) 563]. In addition, flow and heat transfer in a channel partially or fully filled with porous layers and containing solid protruding blocks with constant heat flux on its lower surface are also investigated in details. Hydrodynamic and heat transfer results are reported for both steady and transient flow cases. In particular, the effects of Darcy and Reynolds numbers on heat transfer augmentation and pressure loss are studied. An in-depth discussion of the formation and variation of recirculation is presented and the existence of optimum porous insert is demonstrated. At high Reynolds numbers the flow in the porous channel exhibits a cyclic characteristics although unlike the non-porous channel flow, the cyclic vortex development is only restricted to a small area behind the last solid block, while temperature changes more slowly and does not exhibit cyclic variations over a long period of time. It is shown that for all the cases studied altering some parametric values can have significant and interesting effects on both flow pattern as well as heat transfer characteristics.     

Transient response of a finite crack in an orthotropic strip under the in-plane shear impact

The transient response of a central crack in an orthotropic strip under the in-plane shear impact loading is studied by using the dual integral equation method proposed by Copson and Sih. The general formula for the shear stress intensity factor near the crack tip is derived. Numerical results of with in various cases are obtained by solving the second kind Fredholm integral equation and by performing the inverse Laplace transform.     

平面膜结构拓扑优化的有无复合体方法

将作者对桁架在应力约束下结构拓扑优化的有无复合体模型发展到平面膜结构在应力、位移约束下结构拓扑优化的建模与求解。同时提出了该模型的有效解法,获得了令人满意的数值结果。本文工作表明独立连续拓扑变量的提出对于结构拓扑优化的研究是有意义的。     

轴对称薄壁结构自由振动的边界元分析

采用双互易法分析薄壁轴对称结构自由振动的特征频率以及特征模态.首先,采用径向基函数插值域积分里的位移,利用双互易法将域积分转化为子午面边界的积分.然后,将边界物理量、基本解和特解展开为傅里叶级数,沿环向积分后得到的边界积分方程可用于轴对称结构带体积力问题和受非对称载荷的动力学分析,其积分域为轴对称结构子午面边界上的线积分,进一步降低了问题的维度和离散的难度.文章详细探讨了源点处于对称轴的特殊情况,根据基本解和特解的退化形式,针对无体积力和有体积力分别给出了处理奇异矩阵的方案.对于薄壁结构,采用双曲正弦变换处理近奇异积分有效提高积分精度.最后将双互易法和双曲正弦变化应用于薄壁轴对称结构带体积力的静力学和自由振动分析.数值结果表明,文章提出的处理奇异矩阵的方法能够有效处理源点处于对称轴的情况;当圆筒厚高比为$10^{-3}$,边界元计算的特征频率的相对误差为$10^{-3}$,且优于有限元的结果.      

A Simple Model for the Variation of Permeability due to Partial Saturation in Dual Scale Porous Media

The main focus of this work is to model macroscopically the effects of partial saturation upon the permeability of dual scale fibrous media made of fiber bundles when a Newtonian viscous fluid impregnates it. A new phenomenological model is proposed to explain the discrepancies between experimental pressure results and analytical predictions based on Darcy's law. This model incorporates the essential features of relative permeability but without the necessity of measuring saturation of the liquid for its prediction. The model is very relevant for the small scale industrial systems where a liquid is forced to flow through a fibrous porous medium. It requires four parameters. Two of them are the two permeability values based on the two length scales. One length scale is of the order of magnitude of the individual fiber radius and corresponds to the permeability of the completely staurated medium, the other is of the order of magnitude of the distance between the fiber bundles and corresponds to the permeability of the partially saturated medium. The other two parameters are the lengths of the two partially saturated regions of the flow domain. The two lengths of the partially saturated region and the permeability of the fully saturated flow domain can be directly measured from the experiments. The excellent agreement between the model and the experimental results of inlet pressure profile with respect to time suggests that this model may be used to describe the variation of the permeability behind a moving front in such porous media for correct pressure prediction. It may also be used to characterize the fibrous medium by determining the two different permeabilities and the relative importance of the unsaturated portion of the flow domain for a given architecture.     

White‐Light Emission Strategy of a Single Organic Compound with Aggregation‐Induced Emission and Delayed Fluorescence Properties

A novel white‐light‐emitting organic molecule, which consists of carbazolyl‐ and phenothiazinyl‐substituted benzophenone (OPC) and exhibits aggregation‐induced emission‐delayed fluorescence (AIE‐DF) and mechanofluorochromic properties was synthesized. The CIE color coordinates of OPC were directly measured with a non‐doped powder, which presented white‐emission coordinates (0.33, 0.33) at 244 K to 252 K and (0.35, 0.35) at 298 K. The asymmetric donor–acceptor–donor′ (D‐A‐D′) type of OPC exhibits an accurate inherited relationship from dicarbazolyl‐substituted benzophenone (O2C, D‐A‐D) and diphenothiazinyl‐substituted benzophenone (O2P, D′‐A‐D′). By purposefully selecting the two parent molecules, that is, O2C (blue) and O2P (yellow), the white‐light emission of OPC can be achieved in a single molecule. This finding provides a feasible molecular strategy to design new AIE‐DF white‐light‐emitting organic molecules.     

双刺激响应型纳米载药系统的构建及性能

采用聚乙二醇单甲醚(mPEG)为亲水段,聚赖氨酸(PzLL)为疏水段,通过二硫键和碳氮双键串联桥连合成了两嵌段共聚物(mPEG-CN-SS-PzLL),其中的二硫键具有还原敏感性,碳氮双键具有pH酸敏感性。通过红外光谱和核磁共振谱等手段测试分析了产物的化学结构。将聚合物通过透析法自组装制备得到双刺激响应型纳米载药粒子。结果表明:该纳米载药粒子的药物包封率较高,达到52%。该载药系统在还原环境或酸性环境下具有良好的体外释药性能。     

New Strategy to Access Dual‐Stimuli‐Responsive Triple‐Shape‐Memory Effect in a Non‐overlapping Pattern

Multistimuli‐responsive shape‐memory polymers are highly desirable in various applications, and numerous modes have been developed in recent years. However, most of them need to reprogram before they are ready to respond to another stimulus while one is triggered. Here, a new strategy is developed to achieve dual‐stimuli‐responsive triple‐shape memory with non‐overlapping effect in one programming cycle. Here, a series of poly(l ‐lactide)‐poly(tetramethylene oxide) glycol copolymers (PLA‐PTMEG‐A) is prepared by selected dangling photoresponsive anthracene moieties on the crystalline PTMEG backbone. The architectures of the copolymers are well‐controlled in order to keep a good balance between the crystallinity of the soft segment and the mobility of the anthracene moieties. Thus, PLA‐PTMEG‐A's can respond to heat and light with non‐overlapping effect. The thermally‐induced shape‐memory effect (TSME) is realized by the crystallization–melting transition of PTMEG soft segments, while the light‐induced shape‐memory effect (LSME) is achieved by the reversible photodimerization of anthracene groups. In view of the non‐overlapping effect of TSME and LSME in the copolymers, a triple‐shape‐memory effect triggered by dual‐stimuli is realized in one programming and recovery cycle.