光时域反射光纤光栅传感系统中双激光器的驱动设计

为了扩大应变测量的范围,提出了使用两个分布反馈式(DFB)激光器作为光时域反射光纤光栅(OTDR-FBG)传感系统的光源的方法,并设计了相应的纳秒脉冲驱动电路和温控电路,得到两个激光器的驱动脉冲宽度分别为3.10 ns和3.18 ns,脉冲幅值分别为4.40 V和4.08 V,温度控制电路精度达到±0.04 ℃。经测试得到的纳秒脉冲和温控精度满足OTDR-FBG传感系统的要求。     

基于模糊PI控制的开关磁阻电机调速系统的MATLAB仿真

为改善开关磁阻电机（简称SRM ）的非线性特性问题,提高开关磁阻电机调速系统（简称SRD ）的响应特性和稳定性,对 SRD 采用双闭环控制,即速度外环和电流内环。其中速度外环采用模糊 PI 控制技术,借助 MATLAB/SIMULNK对系统进行建模和仿真。将其仿真结果与常规PI仿真结果进行分析比较。结果表明基于模糊PI控制的开关磁阻电机调速系统,响应速度提高了40%,超调量减小1.2%,调节精度和稳定性都大大提高,系统震荡也明显减小。     

High‐Performance Cathode Based on Self‐Templated 3D Porous Microcrystalline Carbon with Improved Anion Adsorption and Intercalation

Dual‐ion batteries (DIBs) have attracted much attention due to their advantages of low cost and especially environmental friendliness. However, the capacities of most DIBs are still unsatisfied (≈100 mAh g^?1) ascribed to the limited capacity of anions intercalation for conventional graphite cathode. In this study, 3D porous microcrystalline carbon (3D‐PMC) was designed and synthesized via a self‐templated growth approach, and when used as cathode for a DIB, it allows both intercalation and adsorption of anions. The microcrystalline carbon is beneficial to obtain capacity originated from anions intercalation, and the 3D porous structure with a certain surface area contributes to anions adsorption capacity. With the synergistic effect, this 3D‐PMC is utilized as cathode and tin as anode for a sodium‐based DIB, which has a high capacity of 168.0 mAh g^?1 at 0.3 A g^?1, among the best values of reported DIBs so far. This cell also exhibits long‐term cycling stability with a capacity retention of ≈70% after 2000 cycles at a high current rate of 1 A g^?1. It is believed that this work will provide a strategy to develop high‐performance cathode materials for DIBs.     

一种新型的无线光通信调制方法

针对脉冲位置调制(PPM)和数字脉冲间隔调制(DPIM)等方法存在的问题,提出了一种新的双宽脉冲位置调制(DD-PPM)方式.在给出其符号结构的基础上,分析了带宽需求、传输容量和平均功率,推导出弱湍流信道下的误包率模型,并将其与开关键控调制(OOK),PPM和DPIM等典型调制方式进行了比较.理论分析和仿真结果表明,DD-PPM不仅比OOK具有更高的功率利用率和更好的差错性能,比PPM具有更高的带宽效率和传输容量,比DPIM具有相近甚至略好的差错性能,而且因符号长度固定,解调时不存在等待或缓存器溢出等问题,较DPIM更易工程实现.因而作为一种折中的调制方式,DD-PPM在无线光通信中有一定的应用场合.     

基于MOCCCII的双模式二阶通用滤波器

提出了一种基于多输出端口电流控制电流传输器(MOCCCII,multiple outputs current controlled conveyor)的双模式二阶通用滤波器,该滤波器结构简单,仅由5个有源器件、2个接地电容构成, 无须外接电阻.该电路在不改变内部电路结构的情况下能实现电压模式和电流模式滤波器,且每一种工作模式都能实现高通、低通、带通等多种滤波功能,因此该电路具有通用性.面向实际电路完成了PSPICE仿真,结果表明提出的电路正确有效.     

Flexible Transparent Reduced Graphene Oxide Sensor Coupled with Organic Dye Molecules for Rapid Dual‐Mode Ammonia Gas Detection

Flexible chemical sensors utilizing chemically sensitive nanomaterials are of great interest for wearable sensing applications. However, obtaining high performance flexible chemical sensors with high sensitivity, fast response, transparency, stability, and workability at ambient conditions is still challenging. Herein, a newly designed flexible and transparent chemical sensor of reduced graphene oxide (R‐GO) coupled with organic dye molecules (bromophenol blue) is introduced. This device has promising properties such as high mechanical flexibility (>5000 bending cycles with a bending radius of 0.95 cm) and optical transparency (>60% in the visible region). Furthermore, stacking the water‐trapping dye layer on R‐GO enables a higher response as well as workability in a large relative humidity range (up to 80%), and dual‐mode detection capabilities of colorimetric and electrical sensing for NH₃ gas (5–40 ppm). These advantageous attributes of the flexible and transparent R‐GO sensor coupled with organic dye molecules provide great potential for real‐time monitoring of toxic gas/vapor in future practical chemical sensing at room conditions in wearable electronics.     

受控源“电阻性”和“有源性”的研究

首先对受控源的电阻性和有源性进行了分析,然后比较完整系统地讨论了受控源的双重特性在线性时不变含受控源网络中的作用,并通过实例说明了受控源的双重特性在电路等效变换以及叠加定理中的具体的应用。     

A study of gridless method with dynamic clouds of points for solving unsteady CFD problems in aerodynamics

When solving unsteady computational fluid dynamics problems in aerodynamics with a gridless method, a cloud of points is usually required to be regenerated due to its accommodation to moving boundaries. In order to handle this problem conveniently, a fast dynamic cloud method based on Delaunay graph mapping strategy is proposed in this paper. A dynamic cloud method makes use of algebraic mapping principles and therefore points can be accurately redistributed in the flow field without any iteration. In this way, the structure of the gridless clouds is not necessarily changed so that the clouds regeneration can be avoided successfully. The spatial derivatives of the mathematical modeling of the flow are directly determined by using weighted least‐squares method in each cloud of points, and then numerical fluxes can be obtained. A dual time‐stepping method is further implemented to advance the two‐dimensional Euler equations in arbitrary Lagarangian–Eulerian formulation in time. Finally, unsteady transonic flows over two different oscillating airfoils are simulated with the above method and results obtained are in good agreement with the experimental data. Copyright © 2009 John Wiley & Sons, Ltd.