基于激光诱导荧光的环状流液膜流速测量与分析

在对传统方法测量和分析液膜特性的基础上,采用激光诱导荧光方法和互相关测量技术,对竖直管道中的液膜流速进行光学测量和分析。基于高速摄影获取气液环状流中液膜图像,采用数字图像处理技术对液膜流动图像进行处理,得到液膜厚度在空间上的分布函数变化曲线,对间隔固定帧频的液膜图像进行互相关处理,进而采用抛物线拟合,有效提高了互相关极值的测量精度。实验结果表明,本文方法非接触、适用面广,可以有效检测环状流中液膜"破断"现象,并准确测量液膜流速参数。     

某功率单元强迫风冷散热分析和优化

随着电子技术的发展,电子设备的散热问题显得越来越重要。以理论分析的基础上,针对某功率单元整体温度场和速度场,采用有限元的方法,进行数值分析。重点分析不同风机、不同翅片散热器下,功率单元温度场和流场的分布趋势。得到采用引风机、翅片较密的散热器(62个翅片),能够达到最佳的散热效果,满足实际工程需要,有利于功率单元长期可靠运行。     

单脉冲雷达速度量折射误差高精度修正方法

单脉冲雷达是高精度外弹道测量系统中的一种主要测量设备之一,为了提高其测量精度,对所有测量参数都需要进行电波折射误差修正.针对目前单脉冲雷达测速参数折射误差修正精度较低的现状,在距离和角度折射误差修正基础上,提出了基于方向余弦的速度量折射误差高精度修正方法.首先根据经折射修正后的目标精确位置,利用二阶中心平滑微分方法求出目标的真实速度向量;然后再利用测站、地心的位置得到目标到雷达站、地心的方向余弦,进而求出目标与雷达站间电波射线在目标处切矢方向余弦;最后进行距离变化率的折射误差修正.实验证明,该方法比常用的直接微分方法的精度高出20％,且具有较好的实用性和有效性.     

Functions of Acyclic Poly(ethylene Oxide) Homologs: Acceleration of Nucleophilic Reactions and Selective Ion Transport through Membranes

The acceleration effect of poly(ethylene oxide) on nucleophilic reactions was investigated. The enhancement of the reaction rate was interpreted by the cooperative solvation of alkali metal ions with ethereal oxygens of PEO resulting in active nucleophilic anions. In relation to the complex formation of alkali metal ions with PEO, the oligo(ethylene oxide) derivatives were prepared as the synthetic ionophores, which were able to transport alkali metal ions selectively through a liquid membrane against the alkali metal ion concentration.     

量子态选择的分子离子解离动力学：阈值光电子-光离子符合成像技术的应用

阈值光电子一光离子符合速度成像技术通过对光电子和符合的光离子同时进行速度聚焦控制,大幅提高了电子和离子的收集效率和离子平动能分辨率,成为开展气相分子光电离和光电离．解离动力学研究的有效工具．利用该技术,我们精确地测量了分子的电离能、离子出现势等重要参数,并且开展了若干具有量子态或内能选择的离子解离动力学研究,描绘了相关势能面存在浅势阱等重要动力学特征,讨论了不同振动态和电子态的激发对解离机理和产物通道的重要影响．     

Contemplation on Detonation Pressures of Nitramines and ­Nitro Aromatics

A physical model and a mathematical theory for the detonation pressures of explosives materials were developed. The pressure values are expressed as function of the detonation velocity (D) and the average mass (m) of the gaseous products, and are applied for various nitramines and aromatic nitro compounds including nitro pyrimidines and nitro triazines. Some regression equations were obtained and discussed. The pressure values show poor linear dependence on the average mass of the products but good dependence on the detonation velocities alone or Dm. Moreover, for the same Dm value nitramines should produce more pressure than aromatic nitro compounds. This work deals with pressure developed by explosion products and interrelates it with detonation pressure within the constraints of certain assumptions and pays attention to so far unnoticed relationships at least under certain circumstances.     

Ultra Moisturizing Anti-Wrinkle Lotion Enriched with Tocotrienols

A stable palm-based anti-wrinkle lotion enriched with tocotrienols was successfully prepared. The stability of the product was due to the presence of liquid crystalline structure in the emulsion system. It helps in bringing the active to the dermis layer. Functionality active ingredients such as tocotrienols and anti-wrinkle were added in the formulation. A commercial plant extract was used to strengthen the collagen seated at the dermis layer. The product was formulated to pH 5.5 which is suitable for the skin. The mean droplet size is 10.2 µm with a monomodal distribution pattern which prevents agglomeration. This will decrease Brownian motion, thus prolonging its stability. Long-term acute moisturizing tests show a significant increase of between 24% and 17% hydration for five and six weeks respectively. The efficacy testing on 12 subjects confirmed a reduction in natural fine wrinkles on faces during aging or premature aging at ?7.6%.     

Determination of chlorophenols in environmental water samples using directly suspended droplet liquid-liquid-liquid phase microextraction prior to high-performance liquid chromatography

A new sample preparation method named directly suspended droplet liquid-liquid-liquid phase microextraction was used in this research for determination of three chlorophenols in environmental water samples. The analytes (2-chlorophenol, 3-chlorophenol and 4-chlorophenol) were extracted from 4.5?mL acidic donor phase, (pH 2, P1) into an organic phase, 350?µL?of benzene/1-octanol (90?:?10 v/v, P2) and then were back-extracted into a 7?µL droplet of an basic (pH 13) aqueous solution (acceptor phase, P3). In this method, contrary to the ordinary single drop liquid-phase microextraction technique, an aqueous large droplet is freely suspended on the surface of the organic solvent, without using a microsyringe as supporting device. This aqueous microdroplet is delivered at the top-centre position of an immiscible organic solvent which is laid over the aqueous donor sample solution while the solution is being agitated. Then, the acceptor phase containing chlorophenols was withdrawn back into a HPLC microsyringe and neutralised by adding of 7?µL HCl 0.1?M. The total amount was eventually injected into the HPLC system with UV detection at 225?nm for further analysis. Parameters such as the organic solvent, phases volumes, extraction and back-extraction times, stirring rate and pH values were optimised. The calibration graphs are linear in the range of 10–2000?µg?L^?1 with r?≥?0.9973. The enrichment factors were ranged from 115 to 170, and the limit of detection (LOD, n?=?7) varied from 5 to 10?µg?L^?1. The relative standard deviations (RSDs, n?=?5) were found 6.8 to 7.4 at S/N?=?3. All experiments were carried out at room temperature, (22?±?0.5°C).     

浅海波导界面对点源振速方向的影响

采用“虚源法”分析计算了浅海波导环境中接收点处点源总振速方向与水平面夹角,侧重讨论确定性界面反射对总振速方向的影响。研究结果表明：总振速方向和接收点与声源的水平距离、两者深度,海底、海面特性以及声速剖面等有关。在等声速均匀浅海波导中,由于确定性界面反射的影响,当直达声掠射角为1°～50°时,合成总振速方向偏离直达声方向达1.5°～10.5°,声速剖面呈负梯度时,偏离程度更甚.     

Determination of fungicides in sediments using a dispersive liquid–liquid microextraction procedure based on solidification of floating organic drop

A dispersive liquid–liquid microextraction procedure based on solidification of floating organic droplet has been investigated for the determination of fungicides (cyprodinil, difenoconazole, myclobutanil, and spiroxamine) in sediments by HPLC with diode array detection. In the overall extraction process, the extraction solvents can be separated easily from the sample solution, and the experiment time was shortened. Moreover, several parameters such as the type and volume of the extraction solvent and dispersive solvent, centrifugal speed, extraction time, and salt effect that affect the extraction efficiencies of the target fungicides were studied and optimized. Under the optimized conditions, the LOD for the target analytes were in the range of 0.1–0.5 μg/g. Satisfactory recoveries of the target analytes in the sediment samples were 81.00–99.00%, with RSDs (n = 5) that ranged from 1.8 to 6.5%. Finally, the simple, sensitive, and environmentally friendly method was successfully applied to determine the target fungicides in actual sediment samples.