The effective ionization coefficients and electron drift velocities in gas mixtures of CF3I with N2 and CO2 obtained from Boltzmann equation analysis

The electron swarm parameters including the density-normalized effective ionization coefficients(α-η)/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend(SST) experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td(1 Td = 10-17V·cm2),while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of(αη)/N with the CF3I mixture ratio k,the limiting field strength(E/N) lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of(E/N) lim are essentially the same as that for pure SF 6.Additionally,the global warming potential(GWP) and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.     

Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.     

Recent advances of ultrasonic testing of cement based materials at early ages

To summarize some of the most important findings in the field of ultrasonic (US) testing of early age hydration and formation of structure of different cement based materials (CBMs), a review of literature with focus on US P-wave transmission and S-wave reflection methods is presented in this paper. The review shows a great ability of both US techniques to observe setting phenomena and to determine different milestones during the early age formation of CBM’s microstructure. Clear physical basis, high accuracy, and non-destructive nature of the method indicate that US methods could become standardized in the near future.     

Droplets Manipulated on Photothermal Organogel Surfaces

A photoresponsive organogel surface (POS), which integrates characteristics of the photothermal property of Fe₃O₄ nanoparticles and the low hysteresis feature of lubricant‐infused organogels, is shown. A photothermally induced dynamic temperature gradient can be formed rapidly at the location of near‐infrared‐light irradiation (NIR) on POS with suitable Fe₃O₄ nanoparticles content. Thus, various droplets (e.g., water, glycerol, ethylene glycol, propylene glycol, and ethanol) can be transported effectively and nimbly (e.g., along desired trajectories with controllable velocity and direction, even run uphill and deliver solid particles). This work reveals a synergistic effect between the asymmetrical droplet deformation and the inside Marangoni flows, which forms a unique driving force for droplet transport with high efficiency. This finding offers insight into the design of novel responsive interface materials for droplet transportation, which would be significant for laboratory‐on‐a‐chip contexts, mass transportation, and microengines.     

An analysis of peak overpressures in vented gaseous explosions

Experimental data from vented explosion tests using stoichiometric methane–air and 18% hydrogen–air mixtures in a 63.7 m³ chamber with a 2.7 or 5.4 m² vent are presented. Results from experiments conducted using stoichiometric propane–air in 2.42 m³ vessel with a 0.26 m² vent are also reported. The tests were focused on the effect of fuel, enclosure size, ignition location, vent size, and obstacles on the pressure development of a propagating flame in a vented enclosure. The dependence of the maximum pressure generated on the experimental parameters was analyzed. It was found that the pressure maxima may be caused by pressure transients controlled by the interplay of the maximum-flame area, the burning velocity, and the overpressure generated by an external explosion. A simple model was proposed to estimate the maximum pressure for each of the main pressure transients. The model was found to agree with the experimental data within the experimental uncertainty.     

Combining GPS carrier phase and Doppler observations for precise velocity determination

The truncation error and propagation error are analyzed for velocity determination through differential GPS carrier phase observations,and an approach for the choice of the best number of points for the central difference method is developed.In order to overcome the disadvantages of existing GPS velocity determination methods,a new velocity determination algorithm is presented,based on combining carrier phase and Doppler observations.The basic idea is that two types of observation are combined by adding the...     

Variations of the elastic constants of InSb near the covalent-metallic transition

Abstract

The pulse-echo-overlap method was used to measure the longitudinal and transverse wave velocities in single-crystal (100) and (111) samples of InSb up to 3 GPa at room temperature. The peculiar variations of the elastic constants were observed near the covalent-metallic transition.     

Eulerian spatial and temporal autocorrelations: assessment of Taylor's hypothesis and a model

We present measurements of Eulerian longitudinal velocity autocorrelations in homogeneous, isotropic, high-intensity (～9%) free-stream turbulence behind an active grid. Spatial correlations are measured using particle image velocimetry as well as with two-point hot-wire anemometry (HWA), while temporal correlations are measured using HWA. The temporal correlations are transformed into spatial correlations by using Taylor's ‘frozen’ hypothesis with both the mean as well as instantaneous velocities. A model relating Eulerian spatial and temporal autocorrelations is also used for this purpose. The differences from the measured spatial correlation resulting from the use of Taylor's hypothesis on the temporal correlation is quantified; even at this moderately high level of turbulent intensity, the result from the use of the instantaneous velocity as convection velocity is practically indistinguishable from that obtained using the mean velocity. Use of the model produces a good agreement between the estimates of the spatial correlation function. A relation between Eulerian spatial and temporal integral scales is also derived.     

SCM/WDM系统中抑制载波的光学单边带调制技术

为了有效抑制SCM/WDM光纤通信系统中的群速度色散和非线性效应,利用SCM/WDM光纤通信系统中信号经过两次调制这一特性,提出了一种在SCM/WDM系统中容易实现的抑制载波的光学单边带调制技术。抑制载波的光学单边带调制信号具有很大的调制深度,即通过抑制载波可以有效的增大了调制深度,进而可以减小调制器的外加电压升高而激发的一系列有害的非线性效应。实测的调制信号的频谱只剩下了半个边频,有效地减小了光信号的频带宽度,从而可以有效地减小群速度色散对信号的劣化。接收机灵敏度的实测图表明,利用文中所述的抑制载波的光学单边带调制技术可以有效地提高接收机的灵敏度达3-5dB。