一种低压低功耗SRAM/SOI单元设计

提出一种改进4管自体偏压结构SRAM/SOI单元.基于TSUPREM4和MEDICI软件的模拟和结构性能的分析,设计单元结构并选取结构参数.该结构采用nMOS栅下的含p+埋沟的衬底体电阻代替传统6管CMOSSRAM单元中的pMOS元件,具有面积小、工艺简单的优点.该结构可以在0.5V的电源电压下正常工作,与6管单元相比,该单元瞬态响应正常,功耗只有6管单元的1/10,满足低压低功耗的要求.     

PIC单片机在激光电源中的应用研究

论述了单片机控制激光电源的原理，提出了产生PWM控制的基本思想及整个控制系统的硬件组成和软件设计方法。     

Reducing Average and Peak Test Power Through Scan Chain Modification

Parallel test application helps reduce the otherwise considerable test times in SOCs; yet its applicability is limited by average and peak power considerations. The typical test vector loading techniques result in frequent transitions in the scan chain, which in turn reflect into significant levels of circuit switching unnecessarily. Judicious utilization of logic in the scan chain can help reduce transitions while loading the test vector needed. The transitions embedded in both test stimuli and the responses are handled through scan chain modifications consisting of logic gate insertion between scan cells as well as inversion of capture paths. No performance degradation ensues as these modifications have no impact on functional execution. To reduce average and peak power, we herein propose computationally efficient schemes that identify the location and the type of logic to be inserted. The experimental results confirm the significant reductions in test power possible under the proposed scheme.     

基于L298N芯片对离子渗氮中压强的控制

离子渗氮工艺对炉体内压强的控制要求比较高，本文设计了一种基于L298N芯片驱动直流电动机控制的气体流量控制器，可用于控制反应炉的抽气气体流量，提高了炉体压强控制精度，降低了生产成本。     

光纤喇曼放大器的功率转换效率分析

在定义光纤喇曼放大器(FRA)功率转换效率(PCE)的基础上,考察了不同工作条件下光纤喇曼放大器的功率转换效率,分析PCE与光纤喇曼放大器的输入信号功率、输入泵浦功率和光纤长度的关系,比较了分布式与集总式FRA的功率转换效率,给出提高FRA功率转换效率的途径。     

超Jaynes-Cummings模型中的原子置于热辐射场时的相干特性

超Jaynes一Cummings模型中的两能级原子置于热辐射场。通过求解原子与热辐射场相互作用过程中原子约化密度算符非对角元．精确得出子原子相干性的衰变规律。研究了在相互作用系统中外加驱动场时可保持原子的相干性，此时外加驱动场的时间演化与原子的跃迁频率、原子偶极矩、热库的温度和k模光子频率等因素有关。     

SMD在LED显示屏单元板中的应用

针对LED室内点阵显示屏单元板驱动电路采用通孔器件存在的一些问题，提出了采用SMD的解决方法，对两种封装形式的器件特点进行了比较，介绍了SMD在LED显示屏单元板中的具体应用；描述了SMD在LED显示屏领域中的发展趋势。     

PWM整流器高功率因数的实现

论述了交流斩波电路中控制部分的工作原理，并对该电路中电抗器的取值进行了计算。采用16位80C196KC单片机能使控制电路非常简单，并容易实现高频开关器件整流器的高功率因数。     

Call Admission Policies Based on Calculated Power Control Setpoints in SIR-Based Power-Controlled DS-CDMA Cellular Networks

In this paper, we develop call admission control algorithms for SIR-based power-controlled DS-CDMA cellular networks. We consider networks that handle both voice and data services. When a new call (or a handoff call) arrives at a base station requesting for admission, our algorithms will calculate the desired power control setpoints for the new call and all existing calls. We will provide necessary and sufficient conditions under which the power control algorithm will have a feasible solution. These conditions are obtained through deriving the inverse of the matrix used in the calculation of power control setpoints. If there is no feasible solution to power control or if the desired power levels to be received at the base station for some calls are larger than the maximum allowable power limits, the admission request will be rejected. Otherwise, the admission request will be granted. When higher priority is desired for handoff calls, we will allow different thresholds (i.e., different maximum allowable power limits) for new calls and handoff calls. We will develop an adaptive algorithm that adjusts these thresholds in real-time as environment changes. The performance of our algorithms will be shown through computer simulation and compared with existing algorithms.     

Effect of Additives on Magnetic Properties of High Frequency MnZn Power Ferrite

In keeping with the advance of more compact and more power-saving electronic equipment, the demand is increasing for smaller and more efficient switching power supply. Therefore, it is necessary to provide the adequate magnetic power ferrite materials to satisfy the demand. Such ferrite materials have to meet the following main requirement: 1) high initial permeability (μ i ); 2) high saturation magnetic induction (Bs); 3) high Curie temperature (Tc); 4) high electrical resistivity (ρ ); 5)…