Bifurcation analysis of visual angle model with anticipated time and stabilizing driving behavior

In the light of the visual angle model (VAM), an improved car-following model considering driver's visual angle, anticipated time and stabilizing driving behavior is proposed so as to investigate how the driver's behavior factors affect the stability of the traffic flow. Based on the model, linear stability analysis is performed together with bifurcation analysis, whose corresponding stability condition is highly fit to the results of the linear analysis. Furthermore, the time-dependent Ginzburg-Landau (TDGL) equation and the modified Korteweg-de Vries (mKdV) equation are derived by nonlinear analysis, and we obtain the relationship of the two equations through the comparison. Finally, parameter calibration and numerical simulation are conducted to verify the validity of the theoretical analysis, whose results are highly consistent with the theoretical analysis.     

基于MODBUS协议的激光雕刻切割系统HMI人机交互设备

近年来,国内激光雕刻切割控制器技术发展迅速,基于PC的传统控制器已相当成熟.为了显著提高工业生产效率,适应工业生产规模扩张的需要以及工业对系统稳定性要求的提高,目前国内几家专业运动控制器厂家已经实现了激光雕刻切割控制器的完全脱机运行.本文针对脱机控制器的需要设计一款人机交互设备,该设备采用AT89C55WD单片机为主控制器,采用标准的MODBUS协议实现HMI与脱机控制器的可靠通讯.     

基于PMM8731和SI-7300的步进电机驱动电路

PMM8731是日本三洋电机公司生产的步进电机脉冲分配器。而SI-7300则是日本三青公司生产的高性能步进电机集成功率放大器。它们和单片机一起可构成一种高效电机控制驱动电路。文中介绍了PMM8713与SI-7300的功能 ,给出了由它们组成的功率驱动电路及其在步进电机上的应用方法     

In-Situ Intrinsic Interface Strength Measurement at Elevated Temperatures and its Relationship to Interfacial Structure

A previously developed laser spallation technique has been modified to measure the tensile strength of thin film interfaces in-situ at temperatures up to 1100°C. Tensile strengths of Nb/A-plane sapphire, FeCrAl/A-plane sapphire and FeCrAlY/A-plane sapphire were measured up to 950°C. The measured strengths at high temperatures were substantially lower compared with their corresponding strengths at ambient temperature. For example, at 850°C, the interface tensile strength for the Nb/sapphire (151 ± 17 MPa), FeCrAl/sapphire (62 ± 8 MPa) and FeCrAlY/sapphire (82 ± 11 MPa) interface systems were lower by factors of approximately, 3, 5, and 8, respectively, over their corresponding ambient values. These results underscore the importance of using such in-situ measured values under operating conditions as the failure criterion in any life prediction or reliability models of such coated systems where local interface temperature excursions are expected. The results on alloy film interfaces also demonstrate that the presence of Y increases the strength of FeCrAl/Al₂O₃ interfaces.     

双预脉冲驱动X射线激光实验研究

 在“星光-Ⅱ”激光装置上进行了双预脉冲驱动类氖铬X射线激光实验，介绍了实验方法和实验结果，并对结果进行了简短讨论。由于目前“星光”装置输出能量较低，所进行的双预脉冲驱动未能显著提高X射线激光强度，改变预脉冲幅度时X射线激光强度也未有显著变化。利用MED103程序进行了模拟计算，其结果与实验结果一致。     

红外焦平面器件脉冲驱动电路的小型化设计

代表着红外器件发展的主流方向的红外焦平面器件，其正常工作时需要驱动脉冲信号多达十几路，为了使红外焦平面阵列处于最佳工作状态，就必须设计出相应的驱动电路。提出了一种红外焦平面器件驱动电路的设计方法。该电路具有体积小、功率低及灵活性好等特点，为驱动电路以及成像系统的小型化提供了良好的技术基础。     

MOS功率驱动高速脉冲激光器的研究

运用经典电路理论,对MOS功率管的开关特性、驱动原理进行了分析,导出了应用MOS功率管实现高速大电流开关应遵从的原则和方法,并成功地实现了光脉冲上升时间小于5ns、下降时间小于10ns,驱动电流达10～50AP-P激光器电源的要求.     

基于L298N芯片对离子渗氮中压强的控制

离子渗氮工艺对炉体内压强的控制要求比较高，本文设计了一种基于L298N芯片驱动直流电动机控制的气体流量控制器，可用于控制反应炉的抽气气体流量，提高了炉体压强控制精度，降低了生产成本。     

超Jaynes-Cummings模型中的原子置于热辐射场时的相干特性

超Jaynes一Cummings模型中的两能级原子置于热辐射场。通过求解原子与热辐射场相互作用过程中原子约化密度算符非对角元．精确得出子原子相干性的衰变规律。研究了在相互作用系统中外加驱动场时可保持原子的相干性，此时外加驱动场的时间演化与原子的跃迁频率、原子偶极矩、热库的温度和k模光子频率等因素有关。     

SMD在LED显示屏单元板中的应用

针对LED室内点阵显示屏单元板驱动电路采用通孔器件存在的一些问题，提出了采用SMD的解决方法，对两种封装形式的器件特点进行了比较，介绍了SMD在LED显示屏单元板中的具体应用；描述了SMD在LED显示屏领域中的发展趋势。