A novel iterative scheme for parallel inter-symbol interference channels

In this paper, we propose a novel iterative scheme for exploiting transmit diversity using parallel independent Inter-Symbol Interference （ISI） channels. In this adaptive iterative scheme, we use EXtrinsic Information Transfer （EXIT） chart tool to choose appropriate iterative method from Iterative Combining （IC）, used as parallel concatenation turbo-like scheme, and Turbo Equalization （TE）, used as serial concatenation turbo-like scheme. It is show that the proposed iterative scheme provides excellent performance both analytically and through simulations without any compute complexity increase comparable to IC.     

Driving behavior recognition and prediction based on Bayesian model

Since the existing intelligent driving systems are lack of efficiency and accuracy when processing huge number of driving data,a brand new approach of processing driving data was developed to identify and predicate human driving behavior based on Bayesian model.The approach was proposed to take two steps to deduce the specific driving behavior from driving data correspondingly without any supervision,the first step being using Bayesian model segmentation algorithm to divide driving data that inertial sensor collected into near-linear segments with the help of Bayesian model segmentation algorithm,and the second step being using extended LDA model to aggregate those linear segments into specific driving behavior (such as braking,turning,acceleration and coasting).Both offline and online experiments are conducted to verify this approach and it turns out that approach has higher efficiency and recognition accuracy when dealing with numerous driving data.     

驱动复杂RLC互连树的逻辑门延时

提出了一个用于估计RL C互连树驱动点导纳的闭端等效π模型,并将其用于驱动复杂RL C互连树的逻辑门延时的估计中.与其他方法相比,它具有结构简单、精度较高的特点     

相控阵用收发(T/R)组件

本文简要评逆相控阵用收发(T/R)组件的特点及发展概况,介绍了几种收发组件的电路,即混合微波集成电路(HMIC)、微型混合微波集成电路(MHMIC)以及单片微波集成电路(MMIC),并讨论了收发组件的制造工艺、电路组成、封装测试和成品价格。     

健康测试仪中液晶显示的设计和实现

介绍健康测试仪中的液晶显示技术。给出了该测试仪中液晶显示器的设计、液晶驱动芯片的选择、与控制器的硬件接口和部分驱动子程序。     

384×288非制冷红外探测器驱动电路设计

介绍了384×288非制冷红外焦平面探测器UL03191及其工作原理,分析了非制冷红外焦平面阵列驱动电路组成原理、设计方法,重点是偏置电压电路、脉冲电压信号驱动电路、温度检测及控制电路的设计等关键技术,并对主要驱动信号进行了仿真。     

非制冷红外焦平面阵列信号处理系统设计

介绍了320-240非制冷红外焦平面阵列（UFPA）的信号处理系统;采用复杂可编程逻辑器件（FPGA）产生红外焦平面阵列的驱动时序,应用数字信号处理（DSP）技术实现红外焦平面阵列的非均匀校正。实验及仿真结果表明：FPGA可产生焦平面阵列所需时序。DSP对焦平面阵列的非均匀校正效果较好。     

一种抑制同步开关噪声的改进总线翻转编码方法

提出了一种改进总线翻转编码方法,用于抑制高速集成电路系统中的同步开关噪声.该方法可以显著减少总线平均翻转比特位数,同时尽可能使总线相邻位保持奇模传输,有利于改善信号完整性.利用FPGA实现了提出的改进总线翻转编码模块.物理实验表明,相对总线翻转编码,该方法以功耗稍有增加的代价,可取得平均翻转数量减少15.17%、电源波动噪声减小22.34%的编码增益.     

场发射平板显示高低压电平转换电路

提出适用于场发射高压驱动的高低压电平转换电路设计及性能分析。通过模拟,此电路可以在100V的驱动工作电压以及10mA的驱动电流条件下安全工作,最高工作频率可达20MH_z。在50pF输出负载下上升时间和下降时间分别为14,25ns。同时分析了高压CMOS器件与0.8μm标准CMOS工艺兼容过程中的厚栅氧化对于低压器件及高压N管的阈值特性影响。     

激光电源中基于EXB841的IGBT驱动电路设计

根据IGBT对驱动电路的各项要求,在采用专用驱动模块EXB841及带有过流保护功能的驱动电路的基础上,设计了简化的IGBT驱动电路,并提出了构建实际驱动电路的注意事项。通过对PWM信号、IGBT动态驱动信号、IGBT开通时驱动信号上升沿、IGBT关断时驱动信号下降沿等波形的实际观测,表明此驱动电路工作正常。该驱动电路已用于某型脉冲固体激光电源中,运行良好,可靠性较高。