Study of a magnetic alloy-loaded cavity for compact synchrotrons

Magnetic alloy(MA)-loaded cavities have been widely used in compact proton and heavy-ion synchrotrons,and the MA core is the key issue in their development.Chinese-produced MA has never yet been adopted as core material for an MA-loaded cavity.To use Chinese-produced MA as the core material,it is necessary to study its properties,and compare with MA material produced elsewhere.In this paper,the properties of several MA cores made of Chinese-produced material are measured.Based on the measured results,a schematic design is produced for a cavity which could obtain 1 kV gap voltage with less than 1.5 kW power dissipation in the frequency range of0.5-7 MHz.The difference between resonant frequencies obtained from simulation and analytical results is less than10%.     

斜置微穿孔板结构声学特性计算与试验研究

采用声电类比法计算斜置微穿孔板结构吸声性能存在误差.运用阻抗转移法计算斜置结构的吸声系数,用假想平面将斜置微穿孔板结构离散为若干个等宽定空腔的吸声单元,建立简化模型,采用阻抗转移计算每个吸声单元的吸声系数,综合各单元吸声系数,获得整个结构的吸声系数.设计相应的实验比较计算结果表明,采用阻抗转移法计算结果与实验结果吻合良好,声电类比法计算结果偏离实验结果较大.声电类比法采用集中参数分析,需将空腔声阻抗进行近似,造成误差;阻抗转移法不存在这一误差,计算更合理和准确.     

Methylazacalixpyridines: remarkable bridging nitrogen-tuned conformations and cavities with unique recognition properties

Methylazacalix[n]pyridines (n = 4, 8) and methylazacalix[m]arene[n]pyridines (m = n = 2, 4) have been synthesized by a convenient fragment coupling approach starting from 2,6-dibromopyridine, 2,6-diaminopyridine, and benzene-1,3-diamine. Thanks to the intrinsic electronic nature of nitrogen, which can adopt mainly sp(2) hybridization, allowing it variously to conjugate, partially conjugate, or not conjugate with the adjacent one or two pyridine rings, the resulting nitrogen-bridged calixpyridine derivatives act as a unique class of macrocyclic host molecules with intriguing conformational structures offering fine-tunable cavities and versatile recognition properties. Whilst in solution it is fluxional, in the solid state methylazacalix[4]pyridine adopts a 1,3-alternate conformation with a C(2v) symmetry in which every two bridging nitrogen atoms conjugate with one pyridine ring. After protonation, the methylazacalix[4]pyridinium species has a different conjugation system of its four bridging nitrogen atoms, yielding the similar twisted 1,3-alternate conformations with an approximate S(4) symmetry. The cavity of each protonated methylazacalix[4]pyridine, however, varies finely to accommodate guest species of different size and geometry, such as planar DMF or HO(2)CCO(2) (-) ion, a twisted HO(2)CCO(2) (-) ion, and a tetrahedral ClO(4) (-) ion. As giant macrocyclic hosts, both methylazacalix[8]pyridine and methylazacalix[4]arene[4]pyridine interact efficiently with fullerenes C(60) and C(70) through van der Waals forces. Their ease of preparation, versatile conformational structures, and recognition properties make these multinitrogen-containing calixarenes or cyclophanes unique and powerful macrocyclic hosts in supramolecular chemistry.     

Fluorescence sensing of Cu within a pseudo 18-crown-6 cavity

We report herein a pseudo-crown based fluorescent receptor (1) for the selective detection of Cu²⁺ cation. Receptor 1 can detect Cu²⁺ even in 5 μM level in acetonitrile-water (9:1 v/v). Compound 1 is very effective for the detection of Cu²⁺ amongst the series of metal ions studied (Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Pb²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Mn²⁺).     

Electrostatic contribution to the ion solvation energy: cavity effects

Ion solvation process has been analysed for the spherically symmetrical system where an ion is located inside a cavity surrounded by an isotropic nonlocal dielectric medium. It has been proven that for any dielectric properties of the medium, the electric field outside the cavity as well as the ion solvation energy depend only on the total ion charge but not of the particular distribution of the ion charge density inside the cavity. These characteristics remain unchanged if the charge is displaced from the external boundary of the cavity into it. Analytical formulas for them have been derived for a particular model of the nonlocal dielectric function. Comparison of results for the solvation energy on the basis of this new theory and of the conventional approach (disregarding the existence of the cavity) shows a significant difference between their predictions if the ion charge is displaced inside the ion cavity.     

晶化时间对ZSM-5分子筛物化性质及催化性能的影响

 考察了ZSM－5分子筛在晶化过程中的变化规律及其在苯与乙烯气相烷基化制乙苯反应中的催化性能．结果表明,当晶化时间为70h时,分子筛晶体开始出现;晶化90h时无定形物相基本消失．晶化时间从90h再延长至150h,ZSM－5分子筛晶粒的大小、形貌和体相硅铝比都基本不变,但分子筛表面的硅铝比逐渐降低．以晶化时间为90h的ZSM－5分子筛原粉为活性组元制备的催化剂,对苯与乙烯气相烷基化制乙苯反应表现出最佳的催化性能．     

Isoindole Cycloadditions. Part III: The Synthesis of "Windscreen Wiper" and Other N-Bridged Cavity Systems

The thermal addition of N-carbobenzyloxyisoindole (N-Z isoindole) 11a, generated by the reaction of 3,6-di(2-pyridyl)-s-tetrazine 9 with N-Z 7-azabenzonorbornadiene 8a, onto dimethyl tricyclo[4.2.1.0^2.5]nona-3,7-diene-3,4-dicarboxylate 17 occurred site selectively at the cyclobutene -bond to form a stereoisomeric mixture of 1 : 1-adducts 18 and 19, in which the bent-frame isomer 19 was dominant (ratio 5 : 1). In contrast, N-benzyl tetrafluoroisoindole 11c reacted with 17 only under high-pressure conditions (14 kbar, RT, 4 days) to afford 1 : 1-adducts at the cyclobutene site, in which the extended-frame isomer 18c was dominant and the accompanying bent-frame product 19c reverted to starting materials soon after isolation. These same stereoselectivities were used to prepare "windscreen wiper" compound 28c having two mobile N-benzyl substituents attached to a rigid scaffold by the reaction of N-benzyl tetrafluoroisoindole 11c with tetramethyl tetracyclo[4.4.1.0.^2,5.0^7.10]undeca-3,8-diene-3,4,7,8-tetracarboxylate 23. Cavity bis-(cyclobutene-1,2-diester) 6 reacted with N-benzyl tetrafluoroisoindole 11c twice over to produce cavity structure 36 with two O- and two N-benzyl bridges on the inner face, whereas the narrower cavity bis-alkene 32 stopped at the 1 : 1-addition stage. The dynamics of the Z-group in the dual adducts 26a–28a are discussed briefly and key adducts and cavity systems have been structurally evaluated by X-ray crystallography, VT NMR, and molecular modeling.     

1，3—Diphenyl—5—（9—phenanthry1）—2—pyrazoline（DPPhP）：An Excellent Ho1e—Transport Material for Use in Organic Light—Emitting Diodes

An excellent hole-transport material,1,3-diphenyl-5-(9-phenanthryl)-2-pyrazoline(DPPhP)for OLEDs was studied.This compound not only offers hlgh glass transition temperature(Tg=96℃）,good film forming ability,and high HOMO energy level,but also displays excellent hole-transport property.The electrlumlnescent device with a simple structure of ITO/DPPhP(60nm)/AIQ(60mm)/LiF(0.8nm)/Al shows an external quantom efficiency as high as 1.6?     

Raman and FTIR spectroscopic characterization of electrochemically synthesized poly(triphenylamine), PTPA

Triphenylamine was electrochemically polymerized in a mixture of toluene and acetonitrile with different electrolyte salts. The poly(triphenylamine) (PTPA) films are insoluble in polar solvents and show high stability and no degradation or loss in electrochemical properties when stored in a laboratory atmosphere. The PTPA films were characterized in situ by FTIR external reflection spectroscopy and by Raman spectroscopy. Electronic Publication     

On the cavitation energy of water

Free-energy-perturbation theory from molecular dynamics calculations has been used to obtain the DeltaG of adjoining cavities' formation in water. The DeltaGs for systems with three, five and seven cavities are compared with that of a single cavity of the same volume, and found to be in good agreement. The conditions under which the analytical formulation of the energy of cavity formation proposed by Pierotti holds are discussed. The data for a single cavity have been tabulated and can lend themselves to a simple numerical implementation in standard quantum chemical packages, which can be used when high accuracy for DeltaG(cav) is required.