Influence of imide functionalized organo‐modified Mg‐Al layered double hydroxide on the thermal and mechanical properties of new aliphatic‐aromatic poly (amide‐imide)

A new dicarboxylic acid modified Mg‐Al LDH (DLDH) containing imide groups was prepared and its effects on the thermal and mechanical properties of the new synthesized aliphatic‐aromatic poly (amide‐imide) (PAI) were investigated via preparation of PAI/nanocomposite films by solution casting method. The results of X‐ray diffraction (XRD), field emission‐scanning electron microscopy (FE‐SEM) and transmission electron microscopy (TEM) showed a uniform dispersion for LDH layers into the PAI matrix. For comparison, the effects of polyacrylic acid‐co‐poly‐2‐acrylamido‐ 2‐methylpropanesulfonic acid (PAMPS‐co‐PAA) modified Mg‐Al LDH (ALDH) on the PAI properties were also studied. The thermogravimetric analysis (TGA) results exhibited that the temperature at 5 mass% loss (T₅) increased from 277 °C to 310 °C for nanocomposite containing 2 mass% of DLDH, while T₅ for nanocomposite containing 2 mass% of ALDH increased to 320 °C, along with the more enhancement of char residue compared to the neat PAI. According to the tensile test results, with 5 mass% DLDH loading in the PAI matrix, the tensile strength increased from 51.6 to 70.8 MPa along with an increase in Young's modulus. Also the Young's modulus of PAI nanocomposite containing 5 mass% ALDH reduced from 1.95 to 0.81 GPa.     

Ultrasound-aided rapid and enhanced adsorption of anionic dyes from binary dye matrix onto novel hematite/polyaniline nanocomposite: Response surface methodology optimization

In recent times, polyaniline (PANI), a conducting polymer, has been studied widely for environmental remediation application due to its controllable electric conductivity with high surface area, which makes it a suitable adsorbent material. But lower mechanical stability of PANI is considered to be a serious drawback for its large-scale industrial application. To improve the mechanical strength of PANI, in this study, hematite nanoparticles were impregnated onto PANI by oxidative polymerization method in order to fabricate a novel organometallic nanocomposite (hematite-PANI-NC). The hematite-PANI-NC was used as adsorbent for removal of methyl orange (MO) and eosin yellow (EY) dye from binary dye matrix under ultrasonic-assisted adsorption. Excellent MO and EY dye removal (more than 98%) was observed from binary matrix at a wide solution pH from 2.0 to 6.0, and under ultrasound wave the adsorption equilibrium was achieved within 15 min only. Both MO and EY dyes adsorption experimental data strictly followed Langmuir isotherm, and maximum monolayer adsorption capacity of 126.58 mg/g and 112.36 mg/g was observed for MO and EY dye, respectively. The uptake mechanism of MO and EY dyes onto hematite-PANI-NC is governed by electrostatic interaction, π-π bonding and hydrogen bonding between dye molecules and nanocomposite. Response surface methodology analysis reveals maximum MO and EY removal of 98.43% and 99.35% at optimum experimental conditions. This study implies that the hybrid organometallic material hematite-PANI-NC has high potential for quick and enhanced sono-assisted uptake of anionic dyes from water near neutral solution pH.     

A hybrid approach for the sensitivity analysis of integrated inductors

This paper proposes a hybrid methodology for the evaluation of integrated inductors sensitivity against technological/geometrical parameters variation. The obtained results are used in an optimization-based design environment for integrated inductors, as a way of guaranteeing that obtained solutions are robust against parameter variation. For the inductor characterization, a lumped element model is used, where each element value is evaluated through physics based equations. The sensitivity of the inductor characterization to parameter variations is evaluated at two levels. At the physical level, the sensitivity of the model element values to technological/geometrical parameters variations is computed through an equation-based strategy. Then, the sensitivity of the inductor characterization to the model parameter variations is obtained through a simulation-based approach, where the Richardson extrapolation technique is used for the calculation of the partial derivatives. Several examples considering the evaluation of sensitivity of both inductance and quality factor of two inductors in UMC130 technology are presented. Obtained results are compared against Monte-Carlo simulations.     

Effect of Polymerizable Photoinitiators on the UV‐polymerization behaviors of photosensitive polysiloxane

In this contribution, three polymerizable benzophenone photoinitiators containing maleimide group including 4‐maleimidebenzophenone (MBP), 4‐chlorine‐4′‐maleimide benzophenone (CMBP), and 4‐maleimide‐4′‐[(4‐maleimide)thiophenyl]benzophenone (MMTBP) were designed and synthesized to enhance the polymerization degree of photosensitive polysiloxane containing methacryloxy active groups (MAPSO). The polymerization behaviors of the MAPSO cured by different photoinitiators were investigated using Fourier transform infrared (FTIR). It was noted that the MAPSO initiated by MMTBP showed a high carbon–carbon double bond conversion above 80% because of the existence of thiophenyl group which could generate more radicals from the photolysis reaction at the C? S bond. In addition, the thermal stability of the UV‐cured MAPSO were studied by thermogravimetric analysis (TGA), the result showed that the initial 5% mass loss (T _5%) and residual weight percent at 800 °C in nitrogen of the UV‐cured MAPSO initiated by MMTBP systems was 200 °C and 33.8%. Thus, this work provides a new perspective and efficient strategy to improve the polymerization degree of UV‐curable polysiloxanes with carbon–carbon double bonds. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1696–1705     

三维荧光光谱的特征区域选择方法

将数学中的二元凸函数判定和数据挖掘中的聚类分析方法结合,提出了针对三维荧光的光谱区域选择方法,并利用此种方法从光谱图中提取出含有丰富光谱信息的凸集区域。对水体中总有机碳的检测和白酒中黄曲霉素的检测进行了实验研究,实验结果表明,采用本文提出的三维荧光光谱区域选择方法提高了模型的精度,与利用全光谱所建立的回归模型相比,模型精度分别提高了6.17%和4.97%。     

Mechanochemical synthesis of PbS/Ni–Cr layered double hydroxide nanocomposite

1. Download : Download high-res image (140KB)
2. Download : Download full-size image

     

Binary collision simulations of ion transmission through silicon single crystal films

Abstract

Computer simulation studies of the energy distribution of transmitted ions such as alpha-particles, He-, and B-ions through crystalline silicon, using the enhanced binary-collision cascade simulator MARLOWE, will be reviewed. The enhancement includes an additional electronic-energy loss (EEL) model which takes into account explicitly both the target electron density variation via the structure factors and the electron density of the projectile. Investigations of the stopping power for He ions and protons in silicon, at intermediate- and high-energies, based on the adapted EEL model and a velocity-dependent effective charge will be presented. The overall agreement between the calculated and experimentally determined stopping power data and the simulated and measured transmission spectra will be demonstrated. Effects of energy-loss straggling, core-electron contribution to the energy loss at high-energies and charge-state effects at low energies on the transmission spectra will also be discussed.     

Viscosity Mixing Rules for Binary Systems Containing One Ionic Liquid

In this work the applicability of four of the most commonly used viscosity mixing rules to [ionic liquid (IL)+molecular solvent (MS)] systems is assessed. More than one hundred (IL+MS) binary mixtures were selected from the literature to test the viscosity mixing rules proposed by 1) Hind (Hi), 2) Grunberg and Nissan (G–N), 3) Herric (He) and 4) Katti and Chaudhri (K–C). The analyses were performed by estimating the average (absolute or relative) deviations, AADs and ARDs, between the available experimental data and the predicted ideal mixture viscosity values obtained by means of each rule. The interaction terms corresponding to the adjustable parameters inherent to each rule were also calculated and their trends discussed.     

Carbenes,related intermediates,and small-sized cycles: contribution from Professor Nefedov’s laboratory

The review summarizes some of the most prominent results obtained in the laboratory headed by Academician Oleg M. Nefedov at the N. D. Zelinsky Institute of Organic Chemistry of the Russian Academy of Sciences in the field of chemistry of carbenes, their heavy analogs, and related intermediates, as well as small-sized cycles. Those include elaboration of safe methodology of cyclopropanation using diazomethane, development and extension of synthetic applications of diazoesters and other diazo compounds in the preparation of valuable chemical products, design of functionalized alkynylcyclopropanes on the basis of alkynylcarbene reactions, creation of versatile synthetic approaches to preparation of various practically useful fluoroorganic compounds on the basis of reactions of fluorocarbenes, development of synthetic applications of heavy carbene analogs and synthesis of small-sized heterocycles containing silicon and germanium atoms, analysis of mechanisms of some important reactions of carbenes, their analogs and related intermediates on the basis of physicochemical studies, direct spectroscopic studies of various labile intermediates of chemical reactions.     

The solubility of bosentan in aqueous-2-propanol mixtures at several temperatures,measurement and data correlation

ABSTRACT

The solubilities of bosentan (BST) in binary aqueous mixtures of 2-propanol at temperatures ranging from 293.15 to 313.15 K were determined using a shake-flask method. The produced data were modelled with the Jouyban-Acree-van’t Hoff model and difference between the predicted data and experimental ones were illustrated by percent average relative deviations (%ARD). Moreover, the thermodynamic functions of dissolution for BST in the aqueous 2-propanol solutions were computed which suggest that the dissolution process is endothermic and not spontaneous.