Benchmarking and validation of a Geant4–SHADOW Monte Carlo simulation for dose calculations in microbeam radiation therapy

Microbeam radiation therapy (MRT) is a synchrotron‐based radiotherapy modality that uses high‐intensity beams of spatially fractionated radiation to treat tumours. The rapid evolution of MRT towards clinical trials demands accurate treatment planning systems (TPS), as well as independent tools for the verification of TPS calculated dose distributions in order to ensure patient safety and treatment efficacy. Monte Carlo computer simulation represents the most accurate method of dose calculation in patient geometries and is best suited for the purpose of TPS verification. A Monte Carlo model of the ID17 biomedical beamline at the European Synchrotron Radiation Facility has been developed, including recent modifications, using the Geant4 Monte Carlo toolkit interfaced with the SHADOW X‐ray optics and ray‐tracing libraries. The code was benchmarked by simulating dose profiles in water‐equivalent phantoms subject to irradiation by broad‐beam (without spatial fractionation) and microbeam (with spatial fractionation) fields, and comparing against those calculated with a previous model of the beamline developed using the PENELOPE code. Validation against additional experimental dose profiles in water‐equivalent phantoms subject to broad‐beam irradiation was also performed. Good agreement between codes was observed, with the exception of out‐of‐field doses and toward the field edge for larger field sizes. Microbeam results showed good agreement between both codes and experimental results within uncertainties. Results of the experimental validation showed agreement for different beamline configurations. The asymmetry in the out‐of‐field dose profiles due to polarization effects was also investigated, yielding important information for the treatment planning process in MRT. This work represents an important step in the development of a Monte Carlo‐based independent verification tool for treatment planning in MRT.     

Clarification of regimes determining sonochemical reactions in solid particle suspensions

Although there has been extensive research on the factors that influence sonochemical reactions in solid particle suspensions, the role that solid particles play in the process remains unclear. Herein, the effect of monodisperse silica particles (10–100 μm, 0.05–10 vol%) on the sonochemical activity (20 kHz) was investigated using triiodide formation monitoring and luminol tests. The results demonstrate that, in the particle size range considered, the sonochemical yields were enhanced in dilute suspensions (0.05–1 vol%), while further particle addition in semi-dilute suspensions (1–10 vol%) decreased the yields. Two regimes, namely the site-increasing regime and sound-damping regime, are identified in respect of the enhancing and inhibiting effects of the particles, respectively, and their dependence on particle characteristics is analyzed. Both regimes are confirmed based on the cavitation erosion test results or cavitation noise analysis. The clarification of the two regimes provides a better understanding of the dominant factors controlling sonochemistry in the presence of solid particles, as well as a guide for sonochemical efficiency prediction.     

Reduction in etching time for fission tracks in diallyl phthalate resin

Diallyl phthalate (DAP) resin plates were irradiated with fission fragments, and then etched in a conventional aqueous solution of KOH or a PEW solution containing ethanol, water and KOH. Etched tracks were observed and counted by using an optical microscope. The PEW solution made the fission tracks etch-pits clearer in an incomparably shorter etching time. The large and round etch-pits developed on a smooth surface were convenient for optical automatic counting. These etching characteristics of DAP in a PEW solution are suitable for quantitative analysis of fissionable materials and neutron dosimetry.     

Personal dosimetry and area monitoring for neutrons and radon in workplaces

The first successful applications of damage track detectors in radiation protection have been made in the early 1970s in personal dosimetry of neutrons, radon and its progenies. Most of the scientists actively engaged in the solution of the complex problem of personal neutron dosimetry by damage track detectors—SSNTD, have attempted to develop individual radon monitoring for exposure in mines by using the same SSNTDs. In late 1970s and the early 1980s, new radon monitoring devices based on SSNTDs have been developed to measure radon in soil, mainly for applications in uranium prospecting or more generally in earth sciences. Most of the radon monitors, developed since then for completely different applications in mind, have been used later for large scale survey of indoor radon. With the current implementation within Europe of the European Union Directive 96/29, applications of damage track detectors will increase drastically, specially for the assessment of the exposure of the workers to natural sources of radiation. In this case, the early work on personal neutron/radon dosimetry, is highly valuable to tackle these new problems of individual monitoring.     

Radiochromic gel dosemeter for three-dimensional dosimetry

A gel dosemeter in which ionising radiation causes a colour change was produced by modifying an existing Fricke gel system. This allows a more convenient preparation procedure and gives a better quality dosimetric system for three-dimensional (3-D) dose measurements. The role of three active components of the Ferrous sulphate Xylenol orange Gelatin (FXG) gel dosemeter is quantified with special consideration of their effect on system sensitivity and stability. The optimal composition was found to be 0.5 mM ferrous sulphate, 0.1 mM xylenol orange and 25 mM sulphuric acid. The dose response is linear in the range 0.1–30 Gy. The FXG sensitivity, derived from the gradient of the dose response curve, was found to be ΔA=0.084 cm⁻¹ Gy⁻¹, where A is the optical absorption coefficient at a wavelength of 585 nm, with reproducibility and 24 h stability of better than 5%.     

On the Development of the VIPAR Polymer Gel Dosimeter for Three-Dimensional Dose Measurements

Summary: The new polymer gel dosimeter, based on the modification of the VIPAR gel composition, is described for the purpose of radiation dose distribution measurement in radiotherapy. It features increased concentration of the two VIPAR substrates: N-vinylpyrrolidone (8%) and gelatine (7.5%) (N,N′-methylenebisacrylamide was maintained at 4%), and the addition of copper sulphate (0.0008%) and ascorbic acid (0.007%) in order to facilitate the preparation through elimination of the need for deoxygenation of the gel. Following the exposure to ionizing radiation, polymerisation and cross-linking of the new gel monomers occurs retaining the spatial distribution of absorbed dose and causing opacity of the gel. Quantitative parameters of the new gel dose response were studied using magnetic resonance imaging to relate polymerisation induced physicochemical changes of the gel to dose. The dose threshold is found significantly lower than that of the original VIPAR gel. The linear part of measured spin-spin relaxation rate R₂(D) ( = 1/T₂(D)) reaches up to 35 Gy. Its slope and an intercept are slightly higher relative to the original VIPAR. The efficiency of the new polymer gel-magnetic resonance imaging dosimeter was also tested for dose verification of a 3D dose distribution planned by a commercially available treatment planning software (Eclipse External Beam v.6.5) and delivered by a 6 MV medical linear accelerator. The new polymer gel is proposed to be called, VIPAR^nd (after VIPAR-normoxic-double).     

碟形超声变幅杆的设计

优化超声变幅杆的形状结构可有效地提高水域声场分布和空化区域,提升对水域超声空化效果。通过模拟分析发现传统超声变幅杆在水域中具有声场分布均匀性差、变幅杆端部声压高等特征,不利于声波在水域中传播。基于此,提出并优化设计了一种具有碟形结构的变幅杆,位于变幅杆的最大振幅处的碟形结构,有更大的振动位移;模拟表明其水域声场和声压均衡度显著优于传统变幅杆,铝箔空化腐蚀实验进一步证实了其水域中的声压分布均匀性。同时,实验通过铝箔的空化腐蚀、KI剂量测定及工件表面油渍去除对比了传统变幅杆和碟形变幅杆,分析表明碟形变幅杆所在水域中有较大的空化腐蚀区域,腐蚀速率明显提升,声化学反应速率提高,油渍去除程度增强,说明了设计的碟形变幅杆能够促进空化泡的产生,增加水域空化区域。     

A study on the real-time radiation dosimetry measurement system based on optically stimulated luminescence

The optically stimulated luminescent (OSL) radiation dosimeter technically surveys a wide dynamic measurement range and a high sensitivity.Optical fiber dosimeters provide capability for remote monitoring of the radiation in the locations which are difficult-to-acoess and hazardous.In addition.optical fiber dosimeters are immune to electrical and radio-frequency interference.In this paper,a novel remote optical fiber radiation dosimeter is described.The optical fiber dosimeter takes advantage of the charge trapping materials CaS:Ce, Sm that exhibit OSL.The measuring range of the dosimeter is from 0.1 to 100 Gy.The equipment is relatively simple and small in size,and has low power consumption.This device is suitable for measuring the space radiation dose and also can be used in high radiation dose condition and other dangerous radiation occasions.     

Gafchromic HD-V2 investigations using MeV ion beams in vacuum

ABSTRACT

Gafchromic HD-V2 films are employed to study the response to light ions useful in radiotherapy, such as protons, helium and carbon beams. The effects induced by the ions at an energy within about 300 keV and 16?MeV were investigated in terms of optical absorbance measurements in the irradiated active region of the film. The employed ion doses range between 0.4 Gy and 12?kGy. The results show that the net optical density increases almost exponentially with the absorbed dose and that it becomes saturated after prolonged dose higher than 1?kGy. The optical density produced in the film was measured by light transmission measurements at 700?nm wavelength, at which is observed the highest gafchromic sensitivity. Calibration curves of optical density versus exposure dose and type of ion are given. The dependence on the ion stopping power was presented and discussed.     

Infrared (IR) stimulated luminescence from αAl2O3:C

Infrared (IR) stimulated luminescence from α---Al₂O₃:C single crystals was investigated. The data show that the IR-stimulated luminescence curve contains at least two overlapping signals. One of the components was found to be both thermally and optically unstable whereas the second component was thermally stable and slowly decaying under constant stimulation. The slow decaying component was found to be very sensitive to radiation dose. It was found that doses smaller than 1 mGy could be measured and the luminescence could be read several times without significant depletion of the signal.