Reactions of mercury salts with benzo- and tetrafluorobenzobarrelenes

Regiochemistry and stereochemistry of the addition of mercury salts to benzobarrelene and tetrafluorobenzobarrelene have been studied in acetic acid and methanol. The effect of the substrate structure on the regiochemistry of the reaction is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1105–1108, June, 1994.     

Thermoanalytical procedures to identify the morphology of polycrystalline materials

Polypropylenes of differing morphologies were examined by differential thermal analysis. The problems of reordering during the programmed heating are discussed. Four potential procedures by which the reordering could be inhibited are considered, and three of these are experimentally assessed. Their advantages and deficiencies are identified. Two pretreatments, an etching and a crosslinking, are recognised as able to qualitatively characterise the initial morphology, with a preference for the former. A test to identify the occurrence of reordering is identified. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

高抗冲聚丙烯序列结构的综合表征

用高分辨＾１３Ｃ ＮＭＲ、ＦＴＩＲ等手段获得了高抗冲聚丙烯的组成和序列分布等链结构方面的信息。用ＤＳＣ、ＷＡＸＤ等方法研究了它们的结晶行为、熔融转变及晶体结构，多种方法相结合有效地表征了高抗冲聚丙烯的序列结构。     

K0.9Li0.1（Ta0.5Nb0.5）O3晶体压电应变系数的测量

用准静态ｄ＿（３３）测量仪和干涉法相结合。测量了Ｋ＿（０．９）Ｌｉ＿（０．１）（Ｔａ＿（０．５）Ｎｂ＿（０．５）Ｎｂ＿（０．５））Ｏ＿３晶体的压电应变系数。结果为：ｄ＿（３３）＝８６．０，ｄ＿（３３）＝一２９．５，ｄ＿（１５）＝１１２．９×１０￣（－１２）Ｃ／Ｎ．     

交流变频调速技术在二辊轧机压下系统中的应用

介绍一种采用变频调速技术控制的二辊轧机压下系统。该系统可控制轧机压下系统的速度在工艺要求的范围内无级可调，压下量以数字动态显示，控制准确、操作方便。文中对系统的组成及工作原理作了较详细的介绍。     

Crystal and Molecular Structure of OMPCTF

ＣｒｙｓｔａｌａｎｄＭｏｌｅｃｕｌａｒＳｔｒｕｃｔｕｒｅｏｆＯＭＰＣＴＦＷａｎｇＲｕｉ－Ｙａｏ；ＪｉｎＺｈｏｎｇ－Ｓｈｅｎｇ（ＬａｂｏｒａｔｏｒｙｏｆＲａｒｅＥａｒｔｈＣｈｅｍｉｓｔｒｙａｎｄＰｈｙｓｉｃｓ，ＣｈａｎｇｃｈｕｎＩｎｓｔｉｔｕｔｅｏｆＡ...     

非均匀有耗媒质部分参数的重建

在高频部分，通过用Ｗｅｎｔｚｅｌ—Ｋｒａｍｅｒｓ—Ｂｒｉｌｌｏｕｉｎ—Ｊｅｆｆｅｒｙｓ（ＷＫＢＪ）解作为内场近似，本文证明了有耗非均匀媒质的反射系数在复平面上的轨迹是个圆。根据不同入射角度、不同极化的高频反射系数圆的圆心与半径，可以重建出有耗媒质的部分关键参数。本文方法同时适用于已知复反射系数谱和仅知反射系数振幅情况。文中给出具体重建实例。     

脉冲激光LGA法钛表面氮化及其XRD和SEM微观分析

用调Ｑ－ＹＡＧ和ＸｅＣｌ脉冲激光在钛表面以激光气体合金化方法生成氮化钛层，用Ｘ射线衍射仪分析了不同激光能量、不同Ｎ２气压不同作用脉冲数等条件下ＴｉＮ的结晶取向、结晶形态、氮化程度，用扫描电镜观察了它们的微观结构，对脉冲激光的ＬＧＡ法机理进行了探讨，也发现了用ＬＧＡ法对Ｍｏ的氮化生成Ｍｏ２Ｎ．     

Nd：MgO：LiNbO3晶体的荧光光谱及其双晶体腔内互倍频实验

采用激光感生荧光技术测量了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３晶体的偏振荧光光谱，简要地说明了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３双晶体腔内互倍频的基本原理，并在实验中用染料激光作泵浦源实现了其双晶体腔内互倍频运转；得到５４３ｎｍ横模倍频绿光单端输出约ＹＭＷ，腔前泵浦阈值约３８ＭＷ，总转换效率约为１．３％。     

Trade-off analysis on cost and manufacturing technology of an electronic product: Case study

A trade-off analysis on the cost and system packaging metrics of an electronic product aimed at the commercial/retail industry has been carried out. By comparing the system cost and packaging metrics with those of comparable consumer products, we have determined that there is opportunity for significant cost, size, and weight reduction of the overall electronics packaging system. These include the use of fine pitch IC packages, smaller discrete components, denser PCB wiring technology, double sided IC package surface mount, surface mount connectors, and improved plastics for the product housing. The analysis concluded that PCB area reduction of 40%, using a single PCB instead of three boards, reduction in board cost of over 50% and product weight reduction of over 28% are possible using available technologies.