Speciation of Arsenic in Drinking Water by Dispersive Liquid–Liquid Microextraction,Graphite Furnace Atomic Absorption Spectrometry,and Orthogonal Array Design

Orthogonal array design was used to optimize arsenic speciation in drinking water in contact with materials by dispersive liquid–liquid microextraction followed by graphite furnace atomic absorption spectrometry. Arsenic speciation was achieved by the formation of an arsenic(III) hydrophobic complex with a new chelating agent, 1,2,6-hexanetriol trithioglycolate, at neutral pH. The complex was extracted into the organic phase, while arsenic(V) remained in aqueous solution. The concentration of As(V) was determined by subtracting As(III) from the total arsenic following the reduction of As(V) to As(III) by L-cysteine. Orthogonal array design with OA₁₆ (44) and OA₉ (33) matrices was used to optimize the efficiency of dispersive liquid–liquid microextraction and the reduction of As(V) to As(III), respectively. Under the optimal conditions, the detection limit was 0.03?µg?L^?1 for As(III) and the relative standard deviation was 5.9% with an enhancement factor of 87. The calibration curve was linear from 0.19 to 3.0?µg?L^?1 with a correlation coefficient of 0.9996. The developed method was used for arsenic speciation in solutions of drinking water that contacted materials. The recoveries of fortified samples were in an acceptable range from 92.0 to 113.3%.     

Characterization of Sixteenth to Nineteenth Century Ottoman Silk Brocades by Scanning Electron Microscopy–Energy Dispersive X-Ray Spectroscopy and High-Performance Liquid Chromatography

Historical textiles in the Topkap? Museum, which are called silk kaftans and brocades by art historians from the sixteenth and nineteenth were characterized by scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM–EDX) and high-performance liquid chromatography with diode array detection for identification of metal threads and dyestuffs. In the most Ottoman textiles, metal threads, especially belonging to the sultans, were used as the gold gild. Although the chemical composition of the samples on the surface may easily be obtained by SEM–EDX, the thickness of the thin gold layer on metal threads cannot be obtained directly. Hence, the goal of this project is to describe whether metal threads are gilded or not and to measure coating thickness. A new method was developed for measuring the thickness of gold layer, and the modeling was reformed. The SEM–EDX results were interpreted in accordance with the theoretical models. The coating thickness of metal threads was subsequently measured in ancient textiles. The thickness, depth, and valuable metal composition in the threads of the artistic objects were obtained by this approach. Dye analysis was used to characterize the presence of indigotin, carminic acid, ellagic acid, and luteolin in the historical textiles.     

Determination of Aristocularine Enantiomers by Dispersive Liquid–Liquid Microextraction and Chiral High-performance Liquid Chromatography

Here is reported a novel analytical approach for the extractive separation and determination of enantiomeric ratios of aristocularine in bovine serum albumin. The results demonstrate suitable analytical performances. The separation was performed by chiral high-performance liquid chromatography with a 5-µm column using a mobile phase of 1:1 n-hexane:ethanol at a flow rate of 0.7?mL?min^?1 with ultraviolet–visible absorption, circular dichroism, and polarimetric detection. The enantiomers were eluted at 13.2 and 15.6?min for (+) and (?)-aristocularine, with a resolution of 1.58 and a separation factor of 1.27. The analytical parameters for the dispersive liquid–liquid microextraction were optimized; under these conditions, the extraction recoveries were from 88.6% to 93.9% for a two-step extraction. The precision, reported as the percent relative standard deviation, had values from 2.9% to 3.2% for 0.5?µg?mL^?1 of analyte for five replicate measurements using ultraviolet–visible absorption and circular dichroism detection. The limits of detection were between 0.05 and 0.08?µg?mL^?1 with enrichment ratios up to a value of 12.     

The performance of a fast testing system for illicit materials detection based on energy-dispersive X-ray diffraction technique

A prototype setup for detecting illicit materials by energy-dispersive X-ray diffraction (EDXRD) has been developed. The obtained results of NaCl by the equipment suggest that the total measurement system is reliable and can be used to detect different kinds of materials. The tests of TNT, methamphetamine and heroin are also performed on this equipment and the related EDXRD spectra are obviously influenced by the detecting angle and the X-ray sources. The detecting angle of 10° is more suitable for detecting TNT and methamphetamine, while 12° is better for heroin. Moreover, the curves of TNT, methamphetamine and heroin emitted by W target have more diffraction peaks than those emitted by Cu or Mo target, while the peak intensities of TNT and methamphetamine emitted by Mo are stronger than those emitted by Cu or W target. The curve of methamphetamine emitted by Mo target shows a special characteristic and exhibits a super strong diffraction peak located at 1.62 Å^{− 1}, which can be attributed to the effect arising from Mo kα and kβ.     

Ultrasound‐assisted dispersive liquid–liquid microextraction coupled with capillary gas chromatography for simultaneous analysis of nine pyrethroids in domestic wastewaters

A simple and rapid ultrasound‐assisted dispersive liquid–liquid microextraction method coupled with GC‐flame ionization detection was developed for simultaneous determination of nine pyrethroids in domestic wastewater samples. An ultrasound‐assisted process was applied to accelerate the formation of the fine cloudy solution using small volume of disperser solvent, which markedly increased the extraction efficiency and reduced the equilibrium time. Various parameters affecting the extraction efficiency were investigated, including the type and volume of extraction solvent and disperser solvent, extraction and ultrasonic time. Good linearity was obtained for all analytes in the range of 0.8–100 μg/L with the correlation coefficient (r²)≥0.998. The recoveries at three spiking levels ranged from 75.3 to 101.2% with the RSD less than 8.7% (n=5). Under the optimum condition, the enrichment factors for the nine pyrethroids ranged from 728‐ to 1725‐fold. This method offered a good alternative for routine analysis due to its simplicity and reliability.     

SO2气体激光诱导色散荧光时间断层扫描研究

以纳秒Nd:YAG激光器的四倍频（266 nm）为激发源,利用门选通增强光学多通道光谱分析仪 (OMA),研究了SO2分子第一激发带粒子的荧光辐射与碰撞弛豫相结合的复杂退激发过程。通过对SO2分子第一激发带的激发及碰撞弛豫过程的时间断层扫描分析,可以将激光诱导色散荧光谱中以305.6 nm、337.2 nm为中心的荧光包络和以424.7 nm为中心的规则序列分别归属于B1B1、A1A2低振动能级和a3B1基振动能级到基电子态X1A1不同振动能级的荧光跃迁,由此可以确定大气污染气体SO2的诱导荧光的灵敏检测波长为425 nm;由规则序列的实验数据可以计算出SO2分子基电子态X1A1的对称振动和弯曲振动模式的基振动角频率分别为ω1= 1151.8±0.6 cm-1和ω2= 517.8±0.6 cm-1,两振动模式的非谐性常数分别为 = 8±0.6 cm-1和 = 9.2±0.6 cm-1。     

Motion of a vortex filament with axial flow in the half space

We consider a nonlinear third order dispersive equation which models the motion of a vortex filament immersed in an incompressible and inviscid fluid occupying the three dimensional half space. We prove the unique solvability of initial–boundary value problems as an attempt to analyze the motion of a tornado.     

Dark solitonic excitations and collisions from a fourth-order dispersive nonlinear Schrödinger model for the alpha helical protein

Recent protein observations motivate the dark-soliton study to explain the energy transfer in the proteins. In this paper we will investigate a fourth-order dispersive nonlinear Schrödinger equation, which governs the Davydov solitons in the alpha helical protein with higher-order effects. Painlevé analysis is performed to prove the equation is integrable. Through the introduction of an auxiliary function, bilinear forms and dark N-soliton solutions are constructed with the Hirota method and symbolic computation. Asymptotic analysis on the two-soliton solutions indicates that the soliton collisions are elastic. Decrease of the coefficient of higher-order effects can increase the soliton velocities. Graphical analysis on the two-soliton solutions indicates that the head-on collision between the two solitons, overtaking collision between the two solitons and collision between a moving soliton and a stationary one are all elastic. Collisions among the three solitons are all pairwise elastic.     

Chemometric methods in energy dispersive X-ray fluorescence

Chemometric methods like principal component regression (PCR) are an excellent tool for the determination of matrix parameters from scattered radiation. PCR is used for the determination of carbon, hydrogen and oxygen from water and oil-based samples. This information is used in combination with fundamental parameters to determine zink in liquid samples. The method allows an accurate prediction of element concentrations in strong varying matrices.