A neuro-fuzzy system for X-ray spectra interpretation

A decision scheme for the interpretation of spectra from wavelength dispersive X-ray fluorescence spectrometry is described that encompasses elements from three areas of artificial intelligence: fuzzy logic, rule based expert systems and neural net technology.After transforming the recorded spectra to line spectra by appropriate background correction a reasoning scheme is applied that takes into account not only the observed spectra, but also the recording conditions and prior spectroscopic information regarding the relative emission probabilities and the usefulness of the different lines for the purpose of element identification. The latter is done on the basis of a previously described scheme to compute conditional a posteriori Bayes probabilities for a mean matrix. These different pieces of information are then assembled into a battery of fuzzy rules. The importance of the rules as well as the importance of the X-ray lines is determined in a training process, similar to the one in a feedforward back-propagation network.To further stabilize the results this network is pruned in a second training cycle. This, however, had little effect on the quality of interpretation.The advantages of this approach to the interpretation of X-ray spectra over older ones are numerous: the system adapts itself to better interpret spectra that are of greater importance to a laboratory as these are better represented in the training set; the fuzzy logic is capable of working with incomplete and uncertain knowledge, and the neural network results based on these fuzzy rules is readily interpretable by the X-ray spectroscopist as every rule can be expressed also in natural language as in any classical rule based system.On leave from Silesian University, Katowice, Poland     

分散固相萃取结合气相色谱-高分辨质谱快速筛查酱油中多种氯丙醇

建立了酱油中1，3-二氯-2-丙醇、2，3-二氯-1-丙醇、3-氯-1，2-丙二醇和2-氯-1，3-丙二醇的分散固相萃取-气相色谱-高分辨质谱快速筛查检测方法。样品采用乙酸乙酯提取，提取液浓缩后经N-丙基乙二胺净化，气相色谱-高分辨质谱测定，内标法定量。结果表明，该方法对于酱油中4种氯丙醇的定量限为0.5~10 μg/kg。在3个浓度水平下的加标回收率为78%~103%；相对标准偏差均不大于8.8%。该方法快速、简便、准确、灵敏，可作为酱油中4种氯丙醇的有效检测方法。     

Study of metal-loaded activated charcoals for the separation and determination of selenium species by energy dispersive X-ray fluorescence analysis

Conversion of adsorption properties of activated charcoal (C^∗) by metal modification towards selenite, selenate and seleno-dl-methionine (Se-Met) was studied. Several metals were included in modification studies and also a procedure was developed for the separation and independent determination of microgram quantities of these selenium species in aqueous solution. Selenium species were collected one by one from the same sample solution onto collector material by adsorbing them directly or after complex formation onto different metal-loaded activated charcoals (MgC^∗ and FeC^∗). The mass of selenium in these collectors was measured directly by energy dispersive X-ray fluorescence spectrometry (EDXRF). Detection limits for all three selenium species were better than 6 μg corresponding to concentration of 60 μg/l with 0.100 l of initial sample volume.     

Effect of the Measurement Temperature on the Dispersive Component of the Surface Free Energy of a Heat Treated SiO2 Xerogel

The surface free energy of a monolithic silica xerogel treated at 1000°C has been measured by inverse gas chromatography in the temperature range 25–150°C using n-alkanes. Values of the dispersive component, _S ^D, vary from 49.07 mJ·m^–2 at 25°C to 17.20 mJ·m^–2 at 150°C. The _S ^D value obtained at 25°C is lower than that found for amorphous and crystalline silicas but higher than that found for glass fibres meaning that the heat treatment at 1000°C changes drastically the structure of the silica xerogel showing a surface similar to a glass. However, the higher value of _S ^D in comparison to glass fibres can be attributed to the mesoporous structure present in the silica xerogel. In the temperature range of 60–90°C there exists an abrupt change of the _S ^D values as well as in the dispersive component of the surface enthalpy, h _S ^D. Such abrupt change can be attributed to an entropic contribution of the surface free energy.     

基本参数法在能量色散X射线荧光分析金属样品中的应用

在X射线荧光分析中,基本参数法是校正元素间吸收增强效应的数学方法之一。我们使用带有不锈钢窗的~(241)Am59.6keVγ射线作为激发源,用Si(Li)半导体探测器和多道脉冲幅度分析器作为实验手段。采用无标样法,即绝对测量法,因而具有更大的广泛性和实用性。实验中,我们除了考虑元素间的二次、三次荧光吸收增强作用外,对样品中元素     

分散固相萃取净化-超高效液相色谱-串联质谱法同时测定鱼和虾中抗生素及三苯甲烷类兽药残留

建立了分散固相萃取净化-超高效液相色谱-串联质谱法快速测定鱼和虾中3类（磺胺类、喹诺酮类、氯霉素类）18种抗生素及2种三苯甲烷类（孔雀石绿、隐色孔雀石绿）兽药残留。样品经磷酸氢二钾溶液水解分散，乙腈提取，提取液经氯化钠脱水、盐析后取乙腈层，经旋转蒸发仪浓缩至近干，残留物用甲醇定容至1.0 mL，C18和PSA（N-丙基乙二胺）填料分散固相萃取净化，过滤膜后经ZORBAX C18色谱柱（50 mm×2.1 mm，1.8 μm）分离，正、负离子多反应监测模式采集数据，同位素内标法定量。实验结果表明，20种兽药在0.2~300 μg/L范围内具有良好的线性关系，检出限为0.1~0.6 μg/kg，定量限为0.3~1.8 μg/kg，相关系数均大于0.99。在1、5和20倍定量限加标浓度水平下，平均回收率为72.5%~118%，相对标准偏差（RSD）为1.9%~9.8%。该方法具有前处理简单、检测效率高、成本低等优点，适用于鱼和虾中多类兽药残留的同时测定。     

Novel anti-inflammatory and wound healing controlled released LDH-Curcumin nanocomposite via intramuscular implantation,in-vivo study

One of the most common problems in wounds is delayed healing and complications such as infection. Therefore, the need for novel materials accelerates the healing of wounds especially abdominal wounds after surgery besides high efficiency and safety is mandatory. The rate of wound healing, anti-inflammatory and biocompatibility of Zn-Al LDH (Zn-Al layer double hydroxide) alone and loaded with Curcumin (Zn-Al LDH/Curcumin) was screened via in-vivo assays through intramuscular implantation in rat abdominal wall with intact peritoneum cavity. The implanted drugs were formed through Curcumin loaded into LDH of Zn-Al with drug release of 56.78 ± 1.51% within 24 h. The synthesized nanocomposite was characterized by (TGA/DTA) thermal analysis, (XRD) X-ray diffraction, (FESEM) Field emission scanning electron microscopy, (HRTEM) high resolution transmission electron microscope, energy dispersive X-ray (EDX) and low-temperature N₂ adsorption, pore volume and average pore size distribution. The integrity of blood circulation, inflammatory signs, wound healing rate, capacity of tissue integration, antigenicity and composite biocompatibility, auto fluorescence ability of collagen bundles and the tensile strength of the muscle were assessed histopathologically after 7 and 30 days’ post-implantation. Excellent wound healing ability was achieved with shortest length between the wound gap edges and higher tensile strength of the muscle. Besides emit florescence very well followed by good healing and tensile muscles strength in Curcumin while very low strength with scar formation in Zn-Al LDH/Curcumin in both acute and chronic wound. No signs of inflammation in Curcumin & Zn-Al LDH. No vessels obstruction or bleeding observed in both Zn-Al LDH and Curcumin more than Zn-Al LDH/Curcumin and control which examined through candling. Good healing & infiltrated immune cells in same groups through histopathological examination. This work supports the anti-inflammatory, wound healing and biocompatibility of both LDH and Curcumin with living matter, increasing their biomedical applications in this era with safety and increasing efficacy with prolonged drug release.     

Dispersive liquid–liquid microextraction and spectrophotometric determination of cobalt in water samples

A new simple and rapid dispersive liquid–liquid microextraction has been applied to preconcentrate trace levels of cobalt as a prior step to its determination by spectrophotometric detection. In this method a small amount of chloroform as the extraction solvent was dissolved in pure ethanol as the disperser solvent, then the binary solution was rapidly injected by a syringe into the water sample containing cobalt ions complexed by 1-(2-pyridylazo)-2-naphthol (PAN). This forms a cloudy solution. The cloudy state was the result of chloroform fine droplets formation, which has been dispersed in bulk aqueous sample. Therefore, Co-PAN complex was extracted into the fine chloroform droplets. After centrifugation (2 min at 5000 rpm) these droplets were sedimented at the bottom of conical test tube (about 100 µL) and then the whole of complex enriched extracted phase was determined by a spectrophotometer at 577 nm. Complex formation and extraction are usually affected by some parameters, such as the types and volumes of extraction solvent and disperser solvent, salt effect, pH and the concentration of chelating agent, which have been optimised for the presented method. Under optimum conditions, the enhancement factor (as the ratio of slope of preconcentrated sample to that obtained without preconcentration) of 125 was obtained from 50 mL of water sample, and the limit of detection (LOD) of the method was 0.5 µg L^?1and the relative standard deviation (RSD, n = 5) for 50 µg L^?1 of cobalt was 2.5%. The method was applied to the determination of cobalt in tap and river water samples.     

Optimization of solid phase dispersive field‐assisted ultrasonication for the extraction of auramine O and crystal violet dyes using central composite design

Simultaneous preconcentration and determination of auramine o (AO) and crystal violet (CV) dyes from aqueous solution was conducted by ultrasound assisted (dispersive) solid phase microextraction (UASPME) based on SnO₂/SnS composite loaded activated carbon (SnO₂/SnS‐NCs‐AC). The prepared of SnO₂/SnS‐NCs‐AC was characterized by FESEM and XRD analysis. Main and interaction influences of operational parameters such as pH, sonication time, amounts of sorbent, and type of eluent on extraction efficiency were investigated by central composite design and optimized with desirability function approach (DFA). ANOVA was conducted and shows that optimized values were found at 15.33 min sonication time, 0.019 g SnO₂/SnS‐NCs‐AC mass, pH 5.46 and among different solvents, dimethyl formamide was selected as an efficient eluent. Under this conditions recoverees percentage were obtained 82.85% and 86.70% for AO and CV, respectively. Based on F‐test under ANOVA all main effect and interaction effect of understudy parameters has the significant effect on the responses. At optimum conditions, limit of detection (0.0015 and 0.001 mg/l), limit of quantitation (0.4 and 0.4 mg/l), limit of linearity (9.0 and 9.0 mg/l), enrichment factor (33.48 and 83.71) and percent relative standard deviation (3.44 and 4.20) were found to be for auramine o and crystal violet dyes, respectively. Finally, the method was successfully applied for the preconcentration and determination of AO and CV in water samples and ER% of 89.0‐97.0 and 96.2–98.0% as acceptable range were found to be for AO and CV samples, respectively.     

Characterization of an Algerian diatomite by inverse gas chromatography: Specific and non-specific contribution and Lewis acid–base parameters

The fundamental understanding of the behavior of a solid is intimately related to the understanding of the interactions on the surface of the latter, a major challenge in particular if the material is natural and ecological. The infinite dilution-inverse gas chromatography was used to evaluate the surface thermodynamic properties of several phases (grafted and/or coated) diatomite. A series of non- or polar-solute probes were injected at temperatures of 45?°C and 90?°C. The dispersive surface free energies values of the supports decrease with increasing temperature and their active surface is amphoteric with predominantly acidic character.