同轴周期慢波结构色散特性的通用数值解法

 运用场匹配法和傅里叶级数理论,提出一种原则上可数值求解任意同轴周期慢波结构色散特性的方法,给出了同轴慢波结构TM_0n模的色散方程。基于该方法,编制了Matlab程序,给出了同轴波纹波导和同轴双波纹波导色散特性,以算例形式分析计算了同轴盘荷波导的色散特性。数值计算结果与多维全电磁模拟软件结果进行比较,证明了该数值算法的准确性和可靠性。     

光孤子对的振幅比与相位差对传输的影响

利用分步傅里叶变换法分别求解含三阶色散效应和不考虑三阶色散情况下的光孤子非线性薛定谔（NLS）方程,通过数值求解发现三阶色散效应会使孤子对脉冲发生单边振荡,并在振荡侧逐级产生次脉冲。讨论孤子对的两束孤子脉冲之间的振幅比与相位差对传输的影响,发现在不考虑三阶色散的情况下,振幅比与相位差均对孤子对的传输有显著影响,在考虑三阶色散效应时,只有相位差对孤子对的传输产生影响,并可以导致脉冲能量转移。     

双轴晶体中平面波解在主轴坐标系下的表达

在双轴晶体中,除光轴方向外,沿任一方向只存在2个具有不同偏振方向的平面波解,每个解有各自的传播常数。运用拉格朗日乘数法并借助双轴晶体的折射率椭球的概念,在主轴坐标系下求出双轴晶体的平面波解,得到每个解的空间色散关系,并从所得平面波解出发讨论平面波沿光轴方向传输的情况。最后将所得的结果运用到单轴晶体中检验其正确性。     

偏振效应损伤的光通信系统失效概率估算

采用多重重要抽样方法,研究了受偏振模式色散和偏振相关损耗损伤的10 Gbit/s光通信系统的功率代价和失效概率.仿真结果表明,光滤波器对功率代价有重要影响.采用法布里-珀罗滤波器的系统比采用四阶高斯型滤波器的系统有更好的性能表现;发现功率代价通常随着啁啾因子的增大而增大,但当啁啾因子为0.5左右时,系统性能达到最好.仿真结果也表明,即使偏振模式色散和偏振相关损耗同时存在,DPSK系统比OOK系统有更强的PMD和PDL耐受性.     

光学相干层析术提取色散信息的初步研究

为了提取生物组织的色散信息,提出了一种基于Fourier变换以及多项式拟合的方法.该方法通过对光学相干层析术的干涉包络进行Fourier变换,再将得到的相位谱进行多项式拟合以实现色散信息的提取.通过数值模拟及相关实验验证了该方法的可行性.本文的分析结果不但有助于实现动态的色散补偿,而且可以用于区分不同的生物组织,以及同一生物组织的不同生理状态.     

SiO_2单层膜的反常色散研究

利用等效折射率概念分析了SiO2单层膜反常色散出现的原因,并在1.1 m镀膜机上证明了理论分析的合理性.结果表明,理论分析与实验结果一致,沿薄膜厚度方向折射率的对称周期变化使薄膜的等效折射率变化在可见光波段与致密膜层的变化不一致,表现出反常色散的现象.膜厚方向折射率变化周期越大,等效折射率随波长增加的趋势就越大,薄膜表现出的反常色散特性越明显.沿膜厚方向折射率变化幅度的对色散特性影响次之.     

高架污染绕建筑对流扩散风洞实验与数值仿真

采用激光衍射瞬时浓度场测量系统和图像处理系统,对不同高架与周围建筑高度比下污染点源绕建筑对流扩散进行了风洞实验.Fluent双相耦合模型与实验进行了相互校核,得到了建筑的各个高度层面污染分布、不同高度比下的污染扩散及污染分布随时间变化的规律.不同高度比对污染对流扩散具有明显的影响,建筑各高度层面污染浓度分布也存在明显差别.当高度比较小时,污染将堆积在建筑物底层.污染分布随时间变化有助于了解污染对流扩散的时间效应.结果可以为高架与周围建筑规划提供参考与依据.     

Stripping extraction calculation and simulation for CYCIAE-100

A 100 MeV H- compact cyclotron is under construction at China Institute of Atomic Energy (CYCIAE-100). The proton beams of 75 MeV-100 MeV at an intensity of 200 μA will be extracted in dual opposite directions by charge exchange stripping devices. The crossing point at the switching magnet center is fixed inside the magnet yoke and the stripping points for various extraction energies are calculated by the code CYCTRS. With the code GOBLIN, we can calculate the transfer matrix including the dispersion effects from the stripping point to the switch magnet. The beam distribution just after stripping foil can be obtained from the multi-particle tracking code COMA and the extracted beam parameters after the switch magnet such as emittance, envelope, dispersion, energy spread, bunch length, etc. are given by the extraction orbit simulations.     

Measurement of optics for the SSRF storage ring in commissioning

The Shanghai Synchrotron Radiation Facility (SSRF) is a low emittance third-generation synchrotron radiation light source. Some optics parameters of the storage ring were measured when commissioning. This report presents the common methods for measuring some optics parameters of the storage ring, including the betatron tune, beta function, chromaticity, natural chromaticity and dispersion. The results and analysis of measurement for the optics parameters are given here, which are indispensable for the orbit correction of the accelerator and the nonlinear optimization.     

High-frequency behavior of magnetic composites

The paper reviews recent progress in the field of microwave magnetic properties of composites. The problem under discussion is developing composites with high microwave permeability that are needed in many applications. The theory of magnetic composites is briefly sketched with the attention paid to the laws governing the magnetic frequency dispersion in magnetic materials and basic mixing rules for composites. Recent experimental reports on the microwave performance of magnetic composites, as well as data on the agreement of the mixing rules with the measured permeability of composites that are available from the literature are discussed. From the data, a conclusion is made that the validity of a mixing rule is determined by the permeability contrast in the composite, i.e., the difference between permeability of inclusions and that of the host matrix. When the contrast is low, the Maxwell Garnet mixing rule is frequently valid. When the contrast is high, which is of the most interest for obtaining high microwave permeability of a composite, no conventionally accepted theory is capable of accurately predicting the permeability of the composites. Therefore, the mixing rules do not allow the microwave properties of magnetic composites to be predicted when the permeability of inclusions is high, that is the case of the most interest. Because of that, general limitations to the microwave performance of composites are of importance. In particular, an important relation constraining the microwave permeability of composites follows from Kittel's theory of ferromagnetic resonance and analytical properties of frequency dependence of permeability. Another constraint concerning the bandwidth of electromagnetic wave absorbers follows from the Kramers-Kronig relations for the reflection coefficient. The constraints are of importance in design and analysis of electromagnetic wave absorbers and other devices that employ the microwave magnetic properties of composites, such as magnetic substrates for microwave antennas, microwave inductors, etc.