Highly Conductive PEDOT:PSS Films with 1,3‐Dimethyl‐2‐Imidazolidinone as Transparent Electrodes for Organic Light‐Emitting Diodes

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as transparent electrodes for organic light‐emitting diodes (OLEDs) are doped with a new solvent 1,3‐dimethyl‐2‐imidazolidinone (DMI) and are optimized using solvent post‐treatment. The DMI doped PEDOT:PSS films show significantly enhanced conductivities up to 812.1 S cm⁻¹. The sheet resistance of the PEDOT:PSS films doped with DMI is further reduced by various solvent post‐treatment. The effect of solvent post‐treatment on DMI doped PEDOT:PSS films is investigated and is shown to reduce insulating PSS in the conductive films. The solvent posttreated PEDOT:PSS films are successfully employed as transparent electrodes in white OLEDs. It is shown that the efficiency of OLEDs with the optimized DMI doped PEDOT:PSS films is higher than that of reference OLEDs doped with a conventional solvent (ethylene glycol). The results present that the optimized PEDOT:PSS films with the new solvent of DMI can be a promising transparent electrode for low‐cost, efficient ITO‐free white OLEDs.

     

Hierarchical PEG‐Based 3D Patterns Grafting from Polymer Substrate by Surface Initiated Visible Light Photolithography

The precise construction of a hierarchical complex pattern on substrates is required for numerous applications. Here, a strategy to fabricate well‐defined hierarchical three dimensional (3D) patterns on polymer substrate is developed. This technique, which combines photolithography and visible light‐induced surface initiated living graft crosslinking polymerization (VSLGCP), can effectively graft 3D patterns onto polymer substrate with high fidelity and controllable height. Owing to the living nature of VSLGCP, hierarchical 3D patterns can be prepared when a sequential living graft crosslinking process is performed on the first formed patterns. As a proof‐of‐concept, a reactive two layer 3D pattern with a morphology of lateral stripe on vertical stripe is prepared and employed to separately immobilize model biomolecules, e.g., biotin and IgG. This two component pattern can specifically interact with corresponding target proteins successfully, indicating that this strategy has potential applications in the fabrication of polymer‐based multicomponent biomolecule microarrays.

     

Polymerization of a Photocleavable Monomer Using Visible Light

The polymerization of the photocleavable monomer, o‐nitrobenzyl methacrylate (NBMA), is investigated using photoinduced electron/energy transfer reversible addition‐fragmentation chain transfer polymerization. The polymerizations under visible red (λ _max = 635 nm, 0.7 mW cm⁻²) and yellow (λ _max = 560 nm, 9.7 mW cm⁻²) light are performed and demonstrate rational evidence of a controlled/living radical polymerization process. Well‐defined poly(o‐nitrobenzyl methacrylate) (PNBMA) homopolymers with good control over the molecular weight and polymer dispersity are successfully synthesized by varying the irradiation time and/or targeted degree of polymerization. Chain extension of a poly(oligo(ethylene glycol) methyl ether methacrylate) macro‐chain transfer agent with NBMA is carried out to fabricate photocleavable amphiphilic block copolymers (BCP). Finally, these self‐assembled BCP rapidly dissemble under UV light suggesting the photoresponsive character of NBMA is not altered during the polymerization under yellow or red light. Such photoresponsive polymers can be potentially used for the remote‐controlled delivery of therapeutic compounds.

     

Gilch Synthesis of Poly(ortho‐Phenylene Vinylenes): A Powerful Access to High‐Molecular‐Weight Blue‐Emitting Polymers

For the first time, the successful Gilch synthesis of poly(ortho‐phenylene vinylenes) (ortho‐PPVs) is reported. The molar mass of the constitutionally homogeneous ortho‐PPVs reaches values as high as M_w ≈ 300 000 Da. The ortho‐connectivity of the repeating units forces the chains to assume closely packed conformations even in good solvents. Significant perturbation of the π–electron systems and considerable shortening of the conjugation lengths are the consequences. UV–vis absorption and photoluminescence maxima consequently are shifted clearly toward shorter wavelengths compared to, e.g., classic para‐PPVs.

     

Behavior of thermosensitive graft copolymer with aromatic polyester backbone and poly-2-ethyl-2-oxazoline side chains in aqueous solutions

Thermoresponsive graft copolymers with alkylene-aromatic polyester main chain and poly-2-ethyl-2-oxazoline side chains were synthesized. Two copolymer samples which differed in grafting density (0.5 and 0.7) were studied using dynamic and static light scattering and turbidimetry in aqueous solutions at concentration 0.0053?g?cm^?3. Hydrodynamic radii of scattering objects and their contribution to light scattering were obtained as a function of temperature in a wide temperature interval. Temperatures of phase separation were found out. Effect of grafting density on the copolymer behavior in aqueous solutions upon heating was determined. In particular, the phase separation temperature reduces with the decreasing grafting density.     

Simulating Light Scattering Behavior of Branched Molecules

Monte Carlo simulations reveal long chain branching (LCB) topology based on kinetics of systems like low‐density polyethylene (ldPE). Examining the topologies computed shows the majority of branch arms to be short as compared to backbone length, while also a significant branch‐on‐branch fine structure is observed. Until now, predicting scattering function P ⁻¹(θ) from LCB has only been successful for structures like simple combs or stars. Topologies in graph theoretical form are used to predict scattering function P ⁻¹(θ) and by summating intramolecular distances, accounting for branching and excluded volume. Experimental size exclusion chromatography with multiangle light scattering can be brought in line with the predicted branching character. Branching is less than predicted due to a different fine structure in ldPE leading to stronger size contraction.     

New evaporative light scattering detector for high temperature gel permeation chromatography

A new evaporative light scattering detector (ELSD) for the analysis of polyolefins by high temperature gel permeation chromatography (GPC) was recently introduced by Agilent Technologies. For the first time, we investigated the possibility to use this detector to measure the molecular weight distributions (MWD) of different type of polyolefines (polypropylene, linear, and low-density polyethylene). These samples were previously characterized by GPC with a differential refractive index (DRI) detector by several companies, in an interlaboratory study conducted by International Union of Pure and Applied Chemistry.^[1 Luruli, N. 2010. PHASE 1: IUPAC SEC/GPC Round Robin Project Report: Repeatability and Reproducibility of Sample Preparation and Analysis in High-Temperature SEC, http://media.iupac.org/projects/2005/2005-011-3-400_rpt-phase1_110510.pdf [Google Scholar]^] The excellent baseline stability of ELSD as compared with DRI was reflected in a better reproducibility of the measured average molecular weights. More importantly, after applying required corrections to linearize the response of the ELSD as a function of concentration, we obtained similar results as previously obtained with DRI for the MWD of analyzed resins, covering typical applications of polyolefins.     

圆偏振光在手性聚合物合成与结构调控中的应用

手性是自然界中普遍存在的有趣现象之一,在生命体中手性大分子特有的不对称结构在维持生命过程、新陈代谢和进化等面均起着决定性作用.受此启发,合成具有新型结构的光学活性聚合物,研究其独特的物理化学性质和功能已成为当今高分子领域研究的热点.左旋和右旋的圆偏振光已被广泛应用于氨基酸衍生物的不对称光合成、光分解和去消旋化反应,以及诱导含有偶氮苯或三苯胺等特定功能基团的超分子组装体或无机纳米粒子形成稳定螺旋结构.本文详细地介绍了圆偏振光辐照在手性聚合物合成与螺旋结构调控中的应用,初步揭示了圆偏振光的作用机制以及优势,归纳总结了已取得的研究进展,并对圆偏振光在手性聚合物合成与结构调控中的应用及发展进行了简单的评述和展望.     

中空花状可见光响应催化剂g-C_3N_4@BiOCl的制备及其光催化活性

以g-C_3N_4/H_2SO_4溶液和硝酸铋为前驱体,采用自组装法制备了中空花状且具有可见光响应能力的异质结光催化剂gC_3N_4@BiOCl。利用X射线衍射、电子扫描显微镜、高分辨透射电镜、X射线能谱、紫外可见漫反射光谱及X射线光电子能谱等表征手段确证了催化剂的结构。该催化剂能够有效地实现光生电子-空穴的分离,表现出优异的可见光催化活性。通过对50 mg·L~(-1)罗丹明B的降解实验验证了g-C_3N_4@BiOCl的光催化活性,在可见光条件下(λ≥420 nm)的降解效率优良,12 min即可达到99%。