高斯光束经波长级圆孔衍射的轴上光强特性

基于横截面上精确表述的光强和精确的衍射场公式 ,对高斯光束经波长级圆孔衍射的轴上光强特性进行了研究。结果表明 ,高斯衍射光束的轴上光强特性取决于初始高斯半宽度w0 和波长级圆孔的孔径R。对于w0 /R≥ 1的高斯衍射光束 ,轴上光强存在的极值个数和出现的位置仅由比值m=2R/λ决定 ,最大的轴上光强均出现在N =R2 / (λz) =1的地方 ;至于轴上光强极值的峰和谷明显与否 ,取决于w0 /R的比值 ,比值越大 ,轴上光强极值的峰和谷就越明显。当w0 /R的比值足够大时 ,就趋向于平面波入射时的情形。而对于w0 /R<1的这一类高斯衍射光束 ,轴上光强存在特定的演化规律 :随着初始高斯半宽度的减小 ,轴上光强极值个数逐步减少直至全部消失。     

单边凹槽电极结构MSM型蓝光探测器的研究

为提升InGaN基可见光探测器性能,制作并测试了基于GaN/InGaN MQWs外延材料的单边凹槽叉指电极MSM结构蓝光光电二极管。凹槽电极器件的I-V特性测试结果显示,相较于传统平面电极器件,随着偏压增加,器件暗电流越小且越趋于平缓,而光电流越大;光谱响应率测试显示,器件截止带边都位于490nm附近,凹槽电极器件带边处拒绝比高于平面电极器件1个量级。当偏压为5V时,凹槽电极器件响应率为0.0346A/W@480nm,对应外量子效率为8.94%,高于平面电极器件。器件性能提升的原因是单边凹槽电极结构有效改善了内建电场的分布,从而抑制了表面传导漏电流,使得器件暗电流更小且更有利于电极收集光生载流子,提升了响应率。     

共振光散射法测定丁胺卡那霉素

研究了以达旦黄（TY）作为共振光散射探针测定市售药品中丁胺卡那霉素（AMK）的测定方法．该方法基于在pH=5．5的Britton—Robinson缓冲溶液中,达旦黄和丁胺卡那霉素结合后有强烈的共振光散射作用．在λ=482nm处,共振光散射强度（△IRLS）最大且光散射的强度与AMK的浓度在0．4～2．4mg·L^-1范围内成正比（相关系数r=0．9986）,检出限为8．6×10^-3mg·L^-1．该方法简便、快速、灵敏,对1．0mg·L^-1的AMK溶液平行测定11次,RSD=2．57％．用于市售样品的分析测定,结果满意。     

聚N-异丙基丙烯酰胺接枝聚苯乙烯高分子刷的构象

当长链高分子高密度接枝到一个表面上时,由于分子链间的相互作用使得接枝的高分子链扩张而形成伸直链的构象,这种形态被称为高分子刷.     

Enhanced Visible-Light-Driven Photocatalytic Activity by Fe(Ш)-Doped Graphitic C3N4

Fe(Ш)-doped graphitic carbon nitride (Fe(Ш)-CN) photocatalysts with various Fe(Ш) ions content were prepared via ultrasonic method. Detailed physical characterization indicated that Fe(Ш) ions had been successfully doped into the frame of g-C₃N₄. The photocatalytic activities were investigated, and methyl orange (MO) and tetracycline hydrochloride (TC) were used as the targeted pollutants. The as-prepared Fe(Ш)-CN materials exhibited higher photocatalytic activities than those of the pure g-C₃N₄. Specifically, the degradation rate of 2Fe(Ш)-CN under visible light was 2.06 times higher for MO and 2.65 times higher for TC than that of g-C₃N₄. The increased photocatalytic activities of Fe(Ш)-CN were mainly attributed to the enhanced light absorption ability and the rapid separation of photogenerated carriers. Moreover, the importance of active species during the reaction process was also explored, and the results indicated that •O₂⁻ is the main active species.     

A Two-Stage Culture Strategy for Scenedesmus sp. FSP3 for CO2 Fixation and the Simultaneous Production of Lutein under Light and Salt Stress

In this study, Scenedesmus sp. FSP3 was cultured using a two-stage culture strategy for CO₂ fixation and lutein production. During the first stage, propylene carbonate was added to the medium, with 5% CO₂ introduced to promote the rapid growth and CO₂ fixation of the microalgae. During the second stage of cultivation, a NaCl concentration of 156 mmol L⁻¹ and a light intensity of 160 μmol m⁻² s⁻¹ were used to stimulate the accumulation of lutein in the microalgal cells. By using this culture method, high lutein production and CO₂ fixation were simultaneously achieved. The biomass productivity and carbon fixation rate of Scenedesmus sp. FSP3 reached 0.58 g L⁻¹ d⁻¹ and 1.09 g L⁻¹ d⁻¹, with a lutein content and yield as high as 6.45 mg g⁻¹ and 2.30 mg L⁻¹ d⁻¹, respectively. The results reveal a commercially feasible way to integrate microalgal lutein production with CO₂ fixation processes.     

Supramolecular Protein-Polyelectrolyte Assembly at Near Physiological Conditions—Water Proton NMR,ITC, and DLS Study

The in vivo potency of polyphosphazene immunoadjuvants is inherently linked to the ability of these ionic macromolecules to assemble with antigenic proteins in aqueous solutions and form physiologically stable supramolecular complexes. Therefore, in-depth knowledge of interactions in this biologically relevant system is a prerequisite for a better understanding of mechanism of immunoadjuvant activity. Present study explores a self-assembly of polyphosphazene immunoadjuvant—PCPP and a model antigen—lysozyme in a physiologically relevant environment—saline solution and neutral pH. Three analytical techniques were employed to characterize reaction thermodynamics, water-solute structural organization, and supramolecular dimensions: isothermal titration calorimetry (ITC), water proton nuclear magnetic resonance (wNMR), and dynamic light scattering (DLS). The formation of lysozyme–PCPP complexes at near physiological conditions was detected by all methods and the avidity was modulated by a physical state and dimensions of the assemblies. Thermodynamic analysis revealed the dissociation constant in micromolar range and the dominance of enthalpy factor in interactions, which is in line with previously suggested model of protein charge anisotropy and small persistence length of the polymer favoring the formation of high affinity complexes. The paper reports advantageous use of wNMR method for studying protein-polymer interactions, especially for low protein-load complexes.     

可见光响应纳米TiO2光催化薄膜的研究进展

综述了近几年国内外可见光响应纳米TiO₂薄膜制备的研究现状,阐述了TiO₂薄膜光催化降解有机物的催化机理,系统地介绍了提高纳米TiO₂吸收波长的方法、常用载体、可见光响应纳米TiO₂薄膜制备方法和在降解有机物方面的应用,并概述了其以后的发展趋势.     

ZnS薄膜生长温度对ZnS/PS体系结构和发光的影响

用电化学阳极氧化法制备了一定孔隙率的多孔硅(PS,Porous Silicon)样品,然后以PS为衬底用脉冲激光沉积(PLD)的方法在100℃、200℃和300℃下生长ZnS薄膜.X射线衍射(XRD)结果表明,样品都在28.5°附近有一个较强的衍射峰,对应于β-ZnS(111)晶向,说明薄膜沿该方向择优取向生长,但由于衬底PS粗糙的表面结构,衍射峰的半高全宽(FWHM)较大.随着ZnS薄膜生长温度的升高,薄膜的衍射峰强度逐渐增强.扫描电子显微镜(SEM)像显示,随着薄膜生长温度的升高,构成薄膜的纳米晶粒生长变大.室温下的光致发光(PL)谱表明,随着薄膜生长温度的升高,ZnS的发光强度增强而PS的发光强度减弱,把ZnS的蓝绿光与PS的红光叠加,在可见光区450～700 nm形成了一个较宽的光致发光谱带,呈现较强的白光发射.     

N型TOPCon晶硅太阳能电池光注入退火增效的研究

N型隧穿氧化层钝化接触(Tunnel Oxide Passivating Contacts,TOPCon)太阳能电池完成印刷烧结后,再经过光注入,效率有明显提升,主要表现在Voc(开路电压)及FF(填充因子)的提升.其机理在于通过温度和光照强度调节费米能级变化,控制H总量及价态来提高钝化性能.钝化膜层的质量、硅基体掺杂...