新型成膜电解液添加剂亚硫酸丁烯酯的电化学行为

合成制备了一种新的环状亚硫酸酯类有机溶剂——亚硫酸丁烯酯(BS). 量子化学计算结果表明, 亚硫酸丁烯酯有机溶剂分子的总能、LUMO值比碳酸丙烯酯有机溶剂的低, 具有较强的得电子能力, 不易被氧化. 其作为添加剂与碳酸丙烯酯(PC)混合应用于锂离子电池中, 可有效地抑制PC在石墨电极中的共插入, 能显著改善循环性能.     

ITO薄膜制备及RTA处理对发光器件特性的影响

采用射频反应磁控溅射生长铟锡氧化物(ITO)薄膜,通过X射线衍射(XRD)、透射光谱、四探针法及原子力显微镜(AFM)研究了生长条件、快速热退火(RTA)温度等对薄膜的晶化、透过率、电导率以及表面形貌的影响.以ITO/NPB/AlQ/Al结构的器件为例,讨论了不同的制备条件下ITO薄膜的表面效应对电致发光(EL)的影响,通过EL光谱表征发现,对ITO退火处理后,器件的相对发光强度明显增加,衰减速度减慢,器件的EL光谱有明显的变化.通过进一步分析认为,这是由于ITO薄膜表面的变化引起功函数的改变,从而引起电场重新分布造成的.     

基于数字散斑相关的封装热机械耦合效应测量

利用数字散斑相关方法(DSCM),对COB封装结构在热循环状态下的表面热机械耦合效应进行了测量.利用CCD摄像机采集封装芯片在不同温度场中的散斑图像,对比采集到的图像,获取封装芯片在温度场作用下的面内变形.根据三角法测量技术原理,将离面位移的测量转化为面内位移的测量,从而获得了芯片受热后的翘曲形变和弹性应变分布.将实验测量与有限元模拟以及理论计算的结果进行了对比,3种结果吻合得比较好,表明了实验方法的有效性和可行性.     

明胶膜的性能研究进展

明胶膜具有良好的生物相容性和可降解性,并且其物化性质能被调节,因而应用比较广泛.本文综述了不同添加剂和制备条件对明胶膜的机械性能、阻隔性能、生物可降解性等的影响.通常增塑剂可以改善明胶膜的脆性,减小其机械强度和热稳定性.交联能有效提高明胶膜的机械性能和热稳定性,减缓明胶的降解速率.交联包括化学交联、生物相容性交联和物理交联.明胶与蛋白质、糖类、脂类复合,其性能得以改进,并且将明胶与高聚物共混、共聚改性,可以改善明胶膜的性能以满足不同领域的应用.     

聚(二甲基硅氧烷-co-甲氧基十二烷基硅氧烷)在棉纤维及其他模型表面的膜形貌及定向排列方式

用场发射扫描电镜(FESEM)、原子力显微镜(AFM)、光电子能谱(XPS)等仪器研究了棉纤维以及再生纤维素表面聚(二甲基硅氧烷-co-甲氧基十二烷基硅氧烷)(DDPS)的膜形貌及其定向排列方式.结果发现,在天然棉纤维以及再生纤维素模型表面,DDPS均能形成宏观上平滑、而微观形态学实则非均一的疏水性硅膜,表明DDPS的定向排列成膜方式为疏水性硅甲基、硅十二烷基朝外伸向空气,硅氧偶极键指向基质界面.     

单点相位式TOF深度探测器研究与设计

设计了一种单点相位式TOF深度探测器,并提出了相应的深度数据校正模型和消除数据抖动的方法,有一定的实用价值.国内外非常关注单点TOF相机芯片研究,广泛应用于手机、生物医疗、构建三维场景等领域.本文设计完成了数字模块设计并对顶层状态机及时序驱动信号进行寄存器巧妙配置,与模拟部分结合提高系统集成度.设计对深度测量的系统误差...     

Nonlinear resonant tunneling diode (RTD) circuits for microwave A/D conversion

Short-duration electrical pulses play important roles in ultrafast time-domain metrology: they are used to sample rapidly varying signals or as probe signals in ranging radars, time-domain reflectometry and in communication. In this work, we design a nonlinear transmission, which is loaded with resonant tunneling diode to be suitable for microwave A/D conversion. A resonant tunneling diode (RTD) has a negative differential resistance that means when the voltage increases the current decreases. The equivalent circuit of monostable line is given. The simulation is performed by using OrCad program. Results show that a spike is produced and after a charging time constant, another switching occurs. Hence – similar to a relaxation oscillator – the spiking period is determined by the amplitude and frequency of the input current. The transmission line itself ensures the generation and propagation of identical spikes, such as solitons formed after few diodes.     

Atmospheric pressure chemical vapour deposition of fluorine‐doped tin(IV) oxide from fluoroalkyltin precursors

Perfluoroalkytin compounds R_(4−n)Sn(R_f)_n (R = Me, Et, Bu, R_f = C₄F₉, n = 1; R = Bu, R_f = C₄F₉, n = 2, 3; R = Bu, R_f = C₆F₁₃, n = 1) have been synthesized, characterized by ¹H, ¹³C, ¹⁹F and ¹¹⁹Sn NMR, and evaluated as precursors for the atmospheric pressure chemical vapour deposition of fluorine‐doped SnO₂ thin films. All precursors were sufficiently volatile in the range 84–136 °C and glass substrate temperatures of ca 550 °C to yield high‐quality films with ca 0.79–2.02% fluorine incorporation, save for Bu₃SnC₆F₁₃, which incorporated <0.05% fluorine. Films were characterized by X‐ray diffraction, scanning electron microscopy, thickness, haze, emissivity, and sheet resistance. The fastest growth rates and highest quality films were obtained from Et₃SnC₄F₉. An electron diffraction study of Me₃SnC₄F₉ revealed four conformations, of which only the two of lowest abundance showed close F Sn contacts that could plausibly be associated with halogen transfer to tin, and in each case it was fluorine attached to either the γ‐ or δ‐carbon atoms of the R_f chain. Copyright © 2005 John Wiley & Sons, Ltd.     

Molecular organization in MAPLE‐deposited conjugated polymer thin films and the implications for carrier transport characteristics

The morphological structure of poly(3‐hexylthiophene) (P3HT) thin films deposited by both Matrix Assisted Pulsed Laser Evaporation (MAPLE) and solution spin‐casting methods are investigated. The MAPLE samples possessed a higher degree of disorder, with random orientations of polymer crystallites along the side‐chain stacking, π–π stacking, and conjugated backbone directions. Moreover, the average molecular orientations and relative degrees of crystallinity of MAPLE‐deposited polymer films are insensitive to the chemistries of the substrates onto which they were deposited; this is in stark contrast to the films prepared by the conventional spin‐casting technique. Despite the seemingly unfavorable molecular orientations and the highly disordered morphologies, the in‐plane charge carrier transport characteristics of the MAPLE samples are comparable to those of spin‐cast samples, exhibiting similar transport activation energies (56 vs. 54 meV) to those reported in the literature for high mobility polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 39–48     

Pretilt study of double‐layer alignment film (DLAF)

A novel double‐layer alignment film (DLAF) was developed to obtain greater control of the alignment characteristics of the liquid crystal director. The DLAF consists of a thin fluorinated polymer layer on the top of a rubbed non‐fluorinated, non‐branched polyimide layer (PI 2555). Two types of fluorinated polymer with different chemical structures and wetting behaviour on PI 2555 were chosen, to provide either continuous or discontinuous top layers. The continuous top layer DLAF (DLAF‐1) exhibits an abrupt pretilt transition from planar to homeotropic as the top layer thickness increases. The discontinuous top layer DLAF (DLAF‐2) exhibits a gradual transition where the pretilt correlates with the coverage of fluorinated top layer. These two types of transitions fit with de Gennes' local Frederick's transition and Kwok's inhomogeneous alignment theories, respectively. The abrupt pretilt transition system may be promising for chemical/biosensor applications, whereas the gradual transition system is suitable for pretilt control in LCD devices.