Evaluation of the pole expressions of nano-scale multistage amplifiers based on equivalent output impedance

Several frequency compensation schemes have been proposed to stabilize multistage amplifiers with negative feedback. The performance of these amplifiers can be analyzed by inspecting their input-output transfer function as representation of their frequency response. With many circuit elements affecting the output response, it is relatively difficult to obtain the real transfer function of multistage amplifiers based on only the original small-signal expressions. Instead, certain techniques such as Miller’s theorem are used to approximate important parameters such as DC gain and dominant pole. These methods are not generally helpful for approximating the nondominant poles which have a critical role on the loop stability of nano-scale amplifiers. With this issue in mind, this work proposes a systematic methodology to achieve the pole expressions of multistage amplifiers with frequency compensation. The key in the proposed technique is to model the equivalent impedance of the compensation loop at the output. The effectiveness of the proposed approach has been verified through comparison between the transfer functions obtained from theory and those transfer functions found in the literature.     

补偿强反光体表面红外测温误差的算法研究

针对运动强反光体表面温度实时测量困难、精度低这一难点,本文从红外测温原理入手,分析并揭示了红外测温精度易受到被测物体反射率、测量距离、测量环境、红外入射角等因素的影响。根据铝板材加工设备轧辊表面测温实际需要设计了一种利用红外传感器实现对强反光体表面温度点对点测量的方案。通过对测量数据的研究分析建立了一种基于斯忒藩定律的红外入射角度补偿算法,以此减小因红外入射角度变化产生的测温误差。实验结果证明本方法能较好地弥补红外入射角度变化产生的测温误差,提高测温精度。该补偿算法运算简单,适应性强,为改善入射角度变化对测温精度影响提供了新的方法。     

采用一维物理光学法的天线罩瞄准误差补偿

针对雷达天线罩瞄准误差的补偿问题，提出了一种适用于各向同性的天线罩瞄准误差修正方法。构建了基于一维物理光学法的天线罩瞄准误差的数学模型，推导了雷达导引头测量目标角度和角速度的误差修正公式。试验结果表明，该方法有效降低了天线罩瞄准误差对目标角速度性能的影响。     

A picosecond widely tunable deep-ultraviolet laser for angle-resolved photoemission spectroscopy

We develop a picosecond widely tunable laser in a deep-ultraviolet region from 175 nm to 210 nm,generated by two stages of frequency doubling of a 80-MHz mode-locked picosecond Ti:sapphire laser.A β-BaB2O4 walk-off compensation configuration and a KBe2BO3F2 prism-coupled device are adopted for the generation of second harmonic and fourth harmonics,respectively.The highest power is 3.72 mW at 193 nm,and the fluctuation at 2.85 mW in 130 min is less than ±2%.     

Enhanced luminescence of CaSb2O6:Bi3+ blue phosphors by efficient charge compensation

This paper reported an enhanced photoluminescence of CaSb₂O₆:Bi³⁺ by efficient charge compensation. Charge compensated CaSb₂O₆:Bi³⁺,M⁺ (M=Li, Na and K) phosphors were prepared using a co-precipitation technique followed by heat-treatment. The structure and morphology of the as-prepared CaSb₂O₆:Bi³⁺,M⁺ samples were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The results revealed that the obtained CaSb₂O₆:Bi³⁺,M⁺ samples are hexagonal crystal structure and this structure was retained regardless of co-doping by Li⁺, Na⁺ or K⁺. All samples showed sphere-like shape with particle size of 40–80 nm. The optical properties of products were studied by UV–vis diffuse reflectivity, photoluminescence spectra and luminescence decay measurements. Under the excitation of 336 nm light, all of the samples exhibited a strong blue emission peaking around 437 nm, which is attributed to the ³P₁–¹S₀ transition of the Bi³⁺ ion. It was found that the charge compensation has significant effect on the photoluminescence properties of CaSb₂O₆:Bi³⁺ and the best luminescence properties have been achieved for CaSb₂O₆:0.75Bi³⁺,0.75 Na⁺. The mechanism for the enhancement of the blue emission has also been studied in detail. Our results suggested that the optical properties of oxide nanostructures can be tailored through co-doping with aliovalent ions and the favorable luminescence properties of CaSb₂O₆:Bi³⁺,Na⁺ make it potential for lighting and display applications.     

厚度自动控制功能在TCS系统中的实现

本项目主要针对TCS系统中的厚度自动调整功能进行了仔细研究，主要介绍了微张力控制功能、刚度补偿技术以及自动校准过程的实现等，具有良好的推广价值。     

Error evaluation for Zernike polynomials fitting based phase compensation of digital holographic microscopy

Combining the experimental research with the simulation calculation, the error evaluation for Zernike polynomials fitting (ZPF) based phase compensation of digital holographic microscopy (DHM) is performed. The obtained results show that the reconstructed phase with high precision can be obtained by ZPF phase compensation algorithm. Moreover, the phase error for ZPF based phase compensation algorithm increases with both the variation of object height and object transverse area, the larger variation of object height, the larger of phase error, and the larger of object transverse area, the faster increase of RMS phase error. To decrease the error of ZPF phase compensation algorithm, it is required to ensure one of the variations of object height and object transverse area to be a small value. Importantly, the proposed method supplies a useful tool for the error evaluation of phase compensation algorithm.     

相位波带片型时间透镜研究

基于Opti-System软件,对相位波带片型时间透镜进行了深入研究。明确了中心波长对相位波带片型时间透镜焦距色散补偿量的影响机理,建立了中心波长、色散补偿量与输出光脉冲消光比及脉冲宽度间的关系。研究结果表明,相位波带片型时间透镜的焦距色散补偿量,在1 310~1 550 nm波长范围与光信号中心波长呈近似线性关系。通过线性拟合,得出焦距色散补偿量与中心波长的线性关系公式。对于不同波长的输入光波,可通过公式确定最佳焦距色散补偿量,实现最窄脉宽和最优消光比的光脉冲输出。研究结果可为优化相位波带片型时间透镜设计提供理论指导,进而拓宽相位波带片型时间透镜的应用范围。