Optical design of a toroidal grating monochromator based beam line on Indus-1

In this paper, we discuss the detailed optical design of a beam line that is under construction on the synchrotron radiation source, Indus-1. Toroidal mirrors are used as pre-and post- focusing elements and a toroidal grating monochromator as a dispersing element. Using three interchangeable gratings, this monochromator will give, at a moderate resolution, a good throughput on the sample in the wavelength range 40 to 1000 Å. Effect of various parameters and their optimization on the resolution and throughput characteristics have been studied by ray tracing calculations, and presented.     

汽车组合仪表板控制系统设计

介绍了以PIC16F873单片机为控制核心的汽车组合仪表板控制系统的设计,简述了汽车组合仪表板的基本构成,介绍了汽车组合仪表板控制系统的组成和各部分功能,给出了数据采集处理电路、电源电路等部分硬件电路设计方案,并阐述了一些软件设计算法,如分段插补法和用于平滑指针的软件设计算法等。     

Particle multiplicities in the fission-like reactions of 340 MeV Si on Th

Pre-scission and post-scission multiplicities of neutrons and alpha particles have been simultaneously measured for the fission-like reactions of 340 MeV ²⁸Si on ²³²Th. Dynamical model calculations using HICOL code predict that about 90% of the observed events are of quasi-fission type while the remaining 10% are from compound nucleus fission decay. Moving source fits were carried out to the observed neutron and alpha particle spectra, measured at different angles with respect to the fragment directions. The pre-scission and post-scission neutron multiplicities are deduced to be 8.7±2.0 and 9.4±2.0, respectively. The corresponding multiplicity values for alpha particles are found to be 0.22±0.08 and 0.1±0.03. From the measured post-scission neutron multiplicity, it is inferred that about 65±20 MeV of the initial excitation energy remains at scission. This may be compared to the value of 85±30 MeV estimated from PACE2 statistical model calculations, adjusted to reproduce the measured pre-scission neutron multiplicity. From a comparison of the Statistical Model predictions with the measured pre-scission neutron multiplicity, the fission delay is estimated to be of 5⁺⁷₋₃×10⁻²⁰ s which overlaps with the average duration of fission-like process from the contact to the scission point (2×10⁻²⁰ s) as determined from HICOL-based dynamical calculations. For the delay time deduced as above, the pre-scission alpha particle multiplicity calculated by the PACE2 code is about a factor two larger than the experimental one, demonstrating the difficulties in modelling the alpha particle emission from highly elongated shapes that characterize the fissioning system from the contact point to scission.     

A CLASS OF NEW NONCONFORMING FINITE ELEMENTS

A class of new nine-parameter nonconforming finite elements with convergent prop-erties are constructed in terms of the approach of interpolation methods in this paper. All of those finite elements can be viewed as the generalization of Zienkiewicz's finite element by dis-lurbing its parameters.     

一种新的抖动调制方法

本文在脉冲延迟发生的基础上提供了一种用调相方法实现抖动调制的方案。该采用数字电路，与传统的调频方法比较具有易实现，精度高等优点，并为进一步开发出抖动测试集资打下了基础。     

抗坏血酸同顺磁离子Mn~(2+)、Gd~(3+)络会的~(13)C NMR研究

该文用顺磁离子对其近邻~(13)C核的NMR吸收增宽效应,系统地研究了抗坏血酸在不同溶剂中对金属离子Mn~(2+)、Gd~(3+)的配合行为.在水溶液中,抗坏血酸可通过两种配合方式与Mn~(2+)作用,但与Gd~(3+)的作用只有一种稳定的结构.在水中抗坏血酸对金属的配位活性部位分别是1位羟基氧,3位离解的羟基氧和6位羟基氧.在DMSO中,3位羟基由于H~+对该基团的静电遮蔽而变得对金属离子Mn~(2+)表现为配位惰性,同时6位羟基配位活性较大增强.对Gd~(3+)来说,此时没有优势配位活性部位存在.文章还讨论了抗坏血酸在H_2O-DMSO混合溶剂中的~(13)C NMR谱及在DMSO中NaOH对其~(13)C NMR谱及其与金属络合结构的影响.     

基于Windows CE的线路巡检系统

首先讨论了现有线路巡检模式的不足，然后提出了利用windows CE来构建线路巡检系统。分析了该系统的硬件平台之后，提出了线路巡检系统的体系结构，阐述了该系统应具有的软件功能。在实际应用中表明，该系统在线路巡检中有较强的推广价值。     

用最小二乘法恢复逐行倒相副载波

介绍ＰＡＬ制彩色全电视信号中色同步信号编码原理及恢复逐行倒相副载波的过程中，两种计算色同步信号相位角的方法。并且在实验的基础上得出：最小二乘法在ＰＡＬ制电视信号的副载波相位角计算中不仅可以满足精度要求，而且简便灵活。     

声表面波脉冲编码调制振荡器

论述了一种直接式声表面波脉冲编码调制振荡器的工作原理及设计方法。实际制作了工作频率为３９４ＭＨｚ、调制频偏大于２００ｋＨｚ、调制信号码速率大于４００ｋｂｉｔ／ｓ、输出功率大于５０ｍＷ、温度稳定性优于±５０×１０－６（－２０°Ｃ～＋６０°Ｃ）的性能优良的声表面波脉冲编码调制振荡器     

声表面波可程序抽头延迟线研究

报道声表面波可程序抽头延迟线的研制情况。对该器件的总体结构，电路原理框图、声表面波可程序抽头延迟线结构作了一个扼要的概念。同时分别报道了我所研制的各类声表面波可程序抽头延迟线器件性能指标及相应的图片说明，最后对该器件仍存在的一些问题作了探讨。