卤氧化铋复合物光催化剂

利用半导体光催化降解有机污染物与分解水制氢对于解决能源短缺与环境污染这一世界性难题具有重要意义,引起了人们的重视.传统的光催化剂TiO2存在可见光利用率低与光生载流子的复合率高等问题[1-3],因此寻找新型高效光催化剂的工作迫     

Facile ion-exchange synthesis of Gd-doped K2Ta2O6 photocatalysts with enhanced visible light activity

One of the well-known ways of increasing the visible light absorption capability of semiconducting materials is cation doping. This study aims to use Gd doping to tailor the bandgap energy of K₂Ta₂O₆ (KTO) for photocatalytic degradation of organic pollutants under visible light irradiation. Accordingly, the parent KTO and Gd-doped KTO with different Gd concentrations (K_2-3xGd_xTa₂O₆; x = 0.025, 0.05, 0.075 and 0.1 mol%) were synthesized by hydrothermal and facile ion-exchange methods, respectively. The powder XRD, FT-IR, SEM-EDS, TEM-SAED, N₂ adsorption-desorption, XPS, UV–Vis DRS, PL and ESR techniques were used to investigate the effect of Gd dopant concentration on the structural and photocatalytic properties of KTO. The photocatalytic activity of these samples was investigated for the photocatalytic degradation of methylene blue (MB) dye in an aqueous solution at room temperature under visible light irradiation. The experimental results show that all Gd-doped KTO samples exhibit enhanced photocatalytic activity compared with parent KTO toward MB degradation. In particular, Gd-KTO obtained by doping of 0.075 mol% shows the highest photocatalytic activity among the Gd-doped samples and the degradation efficiency of MB was 79% after 180 min of visible light irradiation, which is approximately 1.5 times as high as that by parent KTO (53%). In addition, trapping experiments and electron spin resonance (ESR) analysis demonstrated that the hydroxyl radicals (^?OH) have played a crucial role in the photocatalytic degradation of MB. The reusability and stability of Gd doped-KTO with a Gd content of 0.075 mol% against MB degradation were examined for five cycles. Based on the present study results, a visible light induced photocatalytic mechanism has been proposed for Gd0075-KTO sample.     

Isometric artifacts from polymerase chain reaction-massively parallel sequencing analysis of short tandem repeat loci: An emerging issue from a new technology?

The recent introduction of polymerase chain reaction (PCR)-massively parallel sequencing (MPS) technologies in forensics has changed the approach to allelic short tandem repeat (STR) typing because sequencing cloned PCR fragments enables alleles with identical molecular weights to be distinguished based on their nucleotide sequences. Therefore, because PCR fidelity mainly depends on template integrity, new technical issues could arise in the interpretation of the results obtained from the degraded samples. In this work, a set of DNA samples degraded in vitro was used to investigate whether PCR-MPS could generate “isometric drop-ins” (IDIs; i.e., molecular products having the same length as the original allele but with a different nucleotide sequence within the repeated units). The Precision ID GlobalFiler NGS STR panel kit was used to analyze 0.5 and 1 ng of mock samples in duplicate tests (for a total of 16 PCR-MPS analyses). As expected, several well-known PCR artifacts (such as allelic dropout, stutters above the threshold) were scored; 95 IDIs with an average occurrence of 5.9 IDIs per test (min: 1, max: 11) were scored as well. In total, IDIs represented one of the most frequent artifacts. The coverage of these IDIs reached up to 981 reads (median: 239 reads), and the ratios with the coverage of the original allele ranged from 0.069 to 7.285 (median: 0.221). In addition, approximately 5.2% of the IDIs showed coverage higher than that of the original allele. Molecular analysis of these artifacts showed that they were generated in 96.8% of cases through a single nucleotide change event, with the C > T transition being the most frequent (85.7%). Thus, in a forensic evaluation of evidence, IDIs may represent an actual issue, particularly when DNA mixtures need to be interpreted because they could mislead the operator regarding the number of contributors. Overall, the molecular features of the IDIs described in this work, as well as the performance of duplicate tests, may be useful tools for managing this new class of artifacts otherwise not detected by capillary electrophoresis technology.     

溶剂热合成可调控氧空位的Bi2MoO6纳米晶及其光催化氧化制喹啉和抗生素降解

近年来,半导体光催化在环境净化和有机合成领域的研究引起了广泛的重视.其中,在有机合成领域中,光催化技术已经应用在醇类、环己烷以及芳香族化合物的选择性氧化研究.而另一类具有特殊结构的有机物——N-杂环芳烃,在药物化学和材料科学中具有重要意义.而传统用于合成N-杂化芳烃的脱氢催化氧化反应通常需要高温高压的苛刻环境,传统方法通常还需要使用贵金属催化剂,这也增加了N-杂化芳烃的合成成本;另外,如果合成是均相催化过程,则催化剂难以实现回收利用.因此,开发室温常压条件下的非贵金属多相光催化技术具有巨大的应用前景.本文以能够被可见光驱动的钼酸铋半导体为催化剂,利用氧缺陷策略来提升钼酸铋的光催化氧化性能.不同于传统氧缺陷制备方法(氢气还原热处理、离子掺杂等),本文采用一种低成本的乙二醛辅助溶剂热的方法合成具有可调控的含氧空位Bi₂MoO₆催化剂(OVBMO).通过X射线粉末衍射(XRD)、扫描电镜、透射电镜、紫外可见漫反射吸收光谱、氮气物理吸附脱附、X射线光电子能谱(XPS)、电子自旋共振光谱、光致发光光谱及电化学测试等技术对制备的OVBMO材料进行了物理化学性质及能带研究.XPS,XRD,Raman和FT-IR结果表明,氧空位存在于[Bi₂O₂]²⁺和MoO₆八面体的层间.紫外可见漫反射结果表明,随着氧空位的引入,Bi₂MoO₆的光吸收范围扩大,带隙变窄.结合莫特肖特基和VBXPS分析获得OVBMO的能带位置,发现氧空位的存在不仅会导致禁带中出现缺陷带能级,还会导致价带顶位置上移,促进光生空穴的迁移.PL和电化学结果表明,氧空位的存在使得载流子浓度、载流子的分离能力与界面电荷迁移能力都有较大提升,这是因为氧空位引入的缺陷能级可以浅势捕获电子,抑制光催化剂中的电子与空穴的复合,改变化学反应的速率.同时,氧空位有助于捕获分子氧,分子氧与捕获的光生电子发生反应,产生更多的超氧自由基(·O₂)和空穴(h⁺),从而极大地提升光催化剂的氧化性能.因此,OVBMO在1,2,3,4-四氢喹啉脱氢氧化产生喹啉及系列抗生素(环丙沙星、四环素、盐酸土霉素)的降解反应中,表现出较好的光催化氧化性能.结合多种表征分析,本文还进一步阐明了OVBMO催化剂将1,2,3,4-四氢喹啉脱氢氧化为喹啉的自由基参与的多相催化反应机理.     

Favipiravir (SARS-CoV-2) degradation impurities: Identification and route of degradation mechanism in the finished solid dosage form using LC/LC–MS method

Favipiravir finished dosage was approved for emergency use in many countries to treat SARS-CoV-2 patients. A specific, accurate, linear, robust, simple, and stability-indicating HPLC method was developed and validated for the determination of degradation impurities present in favipiravir film-coated tablets. The separation of all impurities was achieved from the stationary phase (Inert sustain AQ-C18, 250 × 4.6 mm, 5-μm particle) and mobile phase. Mobile phase A contained KH₂PO₄ buffer (pH 2.5 ± 0.05) and acetonitrile in the ratio of 98:2 (v/v), and mobile phase B contained water and acetonitrile in the ratio of 50:50 (v/v). The chromatographic conditions were optimized as follows: flow rate, 0.7 mL/min; UV detection, 210 nm; injection volume, 20 μL; and column temperature, 33°C. The proposed method was validated per the current International Conference on Harmonization Q2 (R1) guidelines. The recovery study and linearity ranges were established from the limit of quantification to 150% optimal concentrations. The method validation results were found to be between 98.6 and 106.2% for recovery and r² = 0.9995–0.9999 for linearity of all identified impurities. The method precision results were achieved below 5% of relative standard deviation. Forced degradation studies were performed in chemical and physical stress conditions. The compound was sensitive to chemical stress conditions. During the study, the analyte degraded and converted to unknown degradation impurities, and its molecular mass was found using the LC–MS technique and established degradation pathways supported by reaction of mechanism. The developed method was found to be suitable for routine analysis of research and development and quality control.     

还原-氧化协同降解全/多卤代有机污染物

全/多卤代有机污染物大多具有生态毒性、生物蓄积性、环境持久性及长距离迁移性,不仅危害环境与生态安全,而且可经食物链传递威胁人类健康。由于卤原子是吸电子基团且取代数目多,这类物质的最高占据分子轨道能较低,难于被氧化降解,相反较易被还原法脱卤降解。随卤原子取代数减少,脱卤产物难被进一步还原,而其毒性甚至高于母体污染物。注意到低卤代有机物更容易发生氧化降解,一些研究构建了还原-氧化接力降解体系,即先利用还原法将全/多卤代有机污染物还原为低卤代产物,再利用氧化法降解这些中间产物,从而实现深度/完全脱卤和矿化。本文根据催化反应类型对还原-氧化联用法进行了归纳,分类介绍了基于传统化学催化、光催化、电化学、光电化学及机械化学等构建还原-氧化协同降解体系的原理及应用,以期为开发高效的处置技术提供思路和建议。     

Facile synthesis of ZnO and Co3O4 nanoparticles by thermal decomposition of novel Schiff base complexes: Studying biological and catalytic properties

In this paper, a novel Zn(II) and Co(II) Schiff base complexes were synthesized by template method via refluxing 2,3-Naphthalenedicarboxaldehyde, Metal(II) chloride (Metal = Zn or Co), and L-phenylalanine. ZnO and Co₃O₄ nanoparticles were synthesized by thermal decomposition of Zn(II) and Co(II) complexes, respectively. The products were characterized using different instruments such as CHN, Conductivity, FT-IR, XRD, HR-TEM, and UV–Vis spectrophotometer. The experimental results of elemental analysis for Zn(II) and Co(II) complexes, agree with the calculated results, indicating that the Zn(II) and Co(II) complexes have 1:1 ligand/metal ratios. The molar conductance of the Zn(II) and Co(II) complexes, is less than 5 Ω^?1cm^?1mol^?1, confirming the non-electrolytic nature of the synthesized complexes. The average crystallite diameter of the ZnO and Co₃O₄ samples is 39.64 and 30.38 nm, respectively. The optical energy gap of the ZnO and Co₃O₄ samples are 2.75 and 3.25 eV, respectively. Methylene blue dye was utilized to examine the photocatalytic properties of the synthesized nanoparticles using UV irradiations in the absence and presence of hydrogen peroxide. The % degradation of the methylene blue dye in the presence of hydrogen peroxide using ZnO and Co₃O₄ samples after 40 min is 94.55 and 98.98, respectively. Six pathogenic microbes were utilized to examine the antimicrobial properties of the synthesized Schiff base complexes and their nanoparticles: Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Streptococcus species, Aspergillus species, and Candida species. Zn(II) and Co(II) complexes display inhibition towards all the studied microbes. Besides, ZnO and Co₃O₄ nanoparticles exhibit less inhibition towards Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Streptococcus species. Moreover, ZnO and Co₃O₄ nanoparticles have no activity towards Aspergillus and Candida species.     

Development and validation of high-performance liquid chromatography method for analysis of β-CCT and its related substances

Compound 2β-carbomethoxy-3β-(4-chlorophenyl)tropane (β-CCT) is a key intermediate for the synthesis of some clinical dopamine transporter (DAT) imaging agents. Potential impurities from synthesis process of β-CCT and degradation during storage might have detrimental effect on the final imaging agents. Thus, it is necessary to guarantee the quality of β-CCT. In this study, a rapid, sensitive and accurate high-performance liquid chromatography (HPLC) method was developed and validated for the analysis of β-CCT and its related substances. The chromatographic separation was achieved on a reverse-phase phenomenex? Gemini C18 column with an isocratic mobile phase consisted of methanol, water and TFA (30:70:0.1 v/v/v). The flow rate was 1.0 mL/min at 30 °C and samples were monitored at 220 nm. The method was validated concerning system suitability, linearity, accuracy, precision, specificity, robustness and stability. The limit of detection (LOD) and the limit of quantification (LOQ) of β-CCT were 0.5 and 1.5 μg/mL, respectively. The linearity range of β-CCT was 1.5–450 μg/mL with a good linear correlation coefficient (R² = 0.9999) between the peak response and concentration. Specificity investigation through forced degradation experiments displayed that β-CCT was stable in acidic, thermal and photolytic degradation conditions, but significantly unstable in alkaline and oxidative conditions. With the developed chromatographic method, possible impurity α-CCT from synthetic process and potential degradation products could be well separated from β-CCT. Good recovery and precision were manifested in the assay method. These results indicated that the present method would be suitable for not only the quality assurance of β-CCT in regular production sample assays but also the monitoring and determination of its related substances.     

Jute stick extract assisted hydrothermal synthesis of zinc oxide nanoflakes and their enhanced photocatalytic and antibacterial efficacy

In this paper, we used green and hydrothermal methodology to prepare zinc oxide (ZnO) nanoflakes (NFs) with jute stick extract (J–ZnO NFs) as growth substrate. The prepared materials were characterized using different analytical techniques including ultraviolet–visible spectroscopy (UV–vis), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The characteristic absorption peak for ZnO NFs and J–ZnO NFs were observed from the UV–vis spectrum at 373 and 368 nm respectively. The hexagonal wurtzite crystal structure of ZnO NFs and J–ZnO NFs was confirmed by XRD analysis. FESEM and TEM analyses of synthesized J–ZnO NFs confirmed their NFs shape and collectively flower-like structure formation by the assembly of NFs of J–ZnO on cellulose of jute stick extract substrate. The FTIR analysis revealed the functional groups of jute stick extract biomolecules, mainly cellulose, are responsible for the formation of collectivel flower like J–ZnO NFs structure. The XPS analysis revealed the surface and chemical compositions (Zn, C, and O) of J–ZnO NFs. The photocatalytic performance of ZnO NFs and J–ZnO NFs samples was carried out by the degradation of methylene blue (MB) dye solution under UV light irradiation. The degradation efficiency of ZnO NFs and J–ZnO NFs was obtained 79 % and 89 %, respectively, for 5 h. Notably, the degradation efficiency of the J–ZnO NFs was 98 % after 8 h of irradiation, which is very inspiring. The both NFs exhibited first-order kinetics with MB photodegradation. We also examined the possible antibacterial activity of both samples against Escherichia coli (E. coli) pathogens, which demonstrated a significant result with a 17 mm and 19 mm zone of inhibition by ZnO NFs and J–ZnO NFs respectively.