Insight into industrial PLA aging process by complementary use of rheology,HPLC, and MALDI

Nowadays, there is a growing availability of biodegradable industrial materials intended to food contact applications whose service life behavior needs to be further investigated. This article is focused on the degradation of two materials based on polylactic acid. The correlation between the rate of degradation and the amount of trapped degradation products was investigated applying three characterization techniques in parallel, namely rheology, high‐performance liquid chromatography (HPLC), and matrix‐assisted laser desorption/ionization (MALDI). The rate of degradation was studied through the evaluation of their rheological properties and calculation of the number of average molecular weights, and weight‐average molecular weights. Water‐soluble oligomers and lactic acid were quantified by HPLC‐ultraviolet. Changes in cyclic and linear oligomers were monitored by MALDI‐time‐of‐flight mass spectrometry. Specimens of 4‐mm thickness of each biopolymer were subjected to hydrolysis in deionized water up to 6 months at two temperatures, simulating service conditions of food packaging. The diminution in viscosity and consequently in molecular weight distribution (20–60%) showed the degradation of the molecular structure of both polylactic acids. The chain scission was followed through the increasing values of lactic acid and hydrolyzed oligomers (twofold to eightfold), and the predominant signal of the linear oligomers over the cyclic ones with aging. Rheology, HPLC, and MALDI showed to be complementary tools to better understand the changes in the molecular structure. The obtained results showed the necessity of adding suitable stabilizers for each particular food packaging application. Copyright © 2013 John Wiley & Sons, Ltd.     

Photocatalytic degradation of trichloroethylene over BiOCl under UV irradiation

In this study, BiOCl samples were synthesized under different pH values and characterized by XRD, SEM, UV‐vis DRS, BET, photoelectrochemical measurement and PL. The photocatalytic performances of the as‐prepared samples were evaluated through the decomposition of trichloroethylene (TCE) under UV irradiation. The influences of several parameters such as solution pH and common inorganic anions on TCE removal were investigated. Results indicated that BiOCl‐0.6 exhibited better photocatalytic performance than BiOCl‐6.0 because of its higher migration ability of photo‐induced carrier. The photocatalytic degradation of TCE over BiOCl‐0.6 followed pseudo first‐order kinetics and appeared to be more efficient in acidic solution than in alkaline. TCE was almost completely dechlorinated in 120 minutes. The inhibiting effect of naturally occurring anions was in the order of HCO₃^‐ >SO₄^2‐ >NO₃^‐, while Cl^‐ exhibited a dual effect. Moreover, BiOCl‐0.6 exhibited superior reusability after three cycles of repetition tests.     

Influence of multiwall carbon nanotubes on morphological and structural changes during UV irradiation of syndiotactic polypropylene films

The effect of UV irradiation on the morphology and structure of syndiotactic polypropylene (sPP) is investigated both for pure films and those filled with multiwall carbon nanotubes (MWCNTs). UV treatment causes a structural reorganization of pure sPP films. It seems that the incorporation of MWCNTs has a strong stabilizing effect, with nanotubes acting as a limiter of the UV‐induced chain breakage, especially when a good dispersion of carbon nanotubes in the polymer is achieved. The incorporation of MWCNTs introduces a high concentration of defects in the crystal structure of sPP, which limits the UV‐induced growth of crystallites, and prevents the development and propagation of cracks caused by UV irradiation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Unusual synthesis of azines and their oxidative degradation to carboxylic acid using iodobenzene diacetate

Reaction of 3-hydrazonobutan-2-one oxime with aromatic aldehydes resulted in the formation of 1,2-bis(arylidene)hydrazine commonly referred as azine as an unexpected product, instead of expected product 3-(aryl)methylenehydrazonobutan-2-one oxime, which were subsequently oxidized to corresponding aromatic acids with an ecofriendly oxidizing agent iodobenzene diacetate. Azines and carboxylic acids were characterized by IR and NMR (¹H, ¹³C, HMBC, and HMQC) studies.     

Thermal and acid labile polyurethanes as a new class of responsive materials in polymeric nanoparticles and nanocapsules

A new class of polyurethanes has been designed, containing tertiary carbamate groups in the main chain of the polymer, which enable the resulting polymer to degrade completely under acid and thermal treatment. The decomposition temperatures of the polymers were determined by measuring the evolution of carbon dioxide and other decomposition products using TGA‐MS. Until decomposition of the polymer, no glass transition was found. The polymers exhibit excellent solubility in common organic solvents like chloroform and tetrahydrofuran, making them to suitable materials for film formation. From the obtained polymers, nanoparticles were synthesized by the solvent evaporation method combined with the miniemulsion technique. The resulting nanoparticles can be used as intelligent fillers in films and sensors, since they degrade at temperatures of above 180 °C, which can be detected by a color change reaction with ninhydrin. Polymeric nanocapsules were prepared by an interfacial polyaddition reaction from 2,4‐toluene diisocyanate and tertiary diols performed at the droplet's interface in inverse (water‐in‐oil) miniemulsions. These nanocapsules with an encapsulated photoacid generator can act as a release system, whereby an acidic release through irradiation with ultraviolet light can be triggered. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Photocatalytic activity of divalent ion (copper,zinc and magnesium) doped NiAl2O4

Nickel aluminate (NiAl₂O₄) and doped nickel aluminate (Ni_1-xM_xAl₂O₄; M = Mg, Zn, Cu; x = 0.1) were prepared by sol-gel method using citric acid. The synthesized compounds were analyzed by various techniques such as powder XRD, FTIR, SEM-EDAX and UV-DRS. The lattice parameter was found to increase with the copper, zinc and magnesium doping in nickel aluminate. The band gap was decreased from 3.0 eV (NiAl₂O₄) to 2.9 (zinc doped), 2.7 eV (magnesium doped) and increased to 3.1 eV in the case of copper doping. The catalytic study was carried out for a cationic (methylene blue) and an anionic dye (methyl orange). The percentage degradation of methyl orange using Zn_0.1Ni_0.9Al₂O₄ and Mg_0.1Ni_0.9Al₂O₄ was found to be 92% (180 min) and 96% (90 min). 93% (120 min) and 97% (120 min) degradation of methylene blue was observed using zinc doped and magnesium doped nickel aluminate respectively. These results are comparatively higher than its parent analogue (94% (180 min) degradation against methyl orange and 91% (120 min) against methylene blue). Whereas the percentage degradation was found to be less in the case of Cu_0.1Ni_0.9Al₂O₄ (83% (180 min) against methyl orange and 90% (120 min) against methylene blue).     

Simultaneous formation of platinum‐based nanocatalysts and degradation of dyes at oil/water interface: Comparative morphological and kinetic studies

To decrease the water pollution of textile industries with a large amount of toxic and non‐biodegradable colored dye effluents, an efficient technique is required to safely remove harmful pollutants. In this paper, the reaction between azo dyes and NaBH₄ catalyzed by nanoparticles (NPs) thin films has been studied. We report insitu degradation of methyl orange (MO) and methyl red (MR) by using Pt‐based thin films monitored by UV–Vis spectroscopy. We have synthesized different thin films such as Pt, PtPd, PtFeFe₂O₃, PtNi and PtAu films from Pt organometallic precursor in the MO and MR medium (dye degradation and NPs formation is happened simultaneously) and activity of these films were compared in the complete degradation of MO and MR dyes. Rate constants for the catalyzed reactions have been determined. PtPd NPs thin film has shown the highest rate constant for the degradation of MO and MR within only a few seconds due to its well‐ordered structure. Furthermore, the effect of presence of MO on the morphology of NPs was investigated.     

透明导电氧化物的原理、问题与研究分析

现代光电子产品和能源技术都大量使用透明导电氧化物(TCO)薄膜.由于太阳能电池、平板显示器、发光二极管、短波长激光器、节能玻璃窗等应用领域日益增长的需求,TCO薄膜获得了越来越广泛的应用.文章总结了TCO薄膜的功能原理、应用需求和当前的研究方向,重点分析了p型TCO薄膜研究所要解决的关键问题(其中包括掺杂非对称性,性能退化与缺陷的生成,结构和变化的关系),指出了p型TCO薄膜制备的关键因素,研究的热点问题和蕴藏的研究机会.     

基于聚丙交酯的光固化型可生物降解聚氨酯丙烯酸酯的合成和表征

基于聚醚酯的聚氨酯丙烯酸酯具有应用于组织工程支架材料及相关生物医用材料的潜力,研究其可生物降解性及影响因素非常重要.聚醚酯是由PEG(Mw=400)引发L-丙交酯开环聚合而得到的PLLA-PEGPLLA(PLEL)嵌段共聚物.它与二异氰酸酯(异佛尔酮二异氰酸酯和六亚甲基二异氰酸酯)反应,并用甲基丙烯酸羟乙酯封端,得到聚氨酯丙烯酸酯低聚物,然后通过紫外固化得到聚氨酯丙烯酸酯材料(PUA).用NMR和GPC对PLEL二醇和预聚物进行了组成和分子量表征,用DSC和DMA对PUA进行了结构和物理性能表征以及用接触角、吸水率和质量分析方法对材料的亲水性和降解性能进行了表征.结果发现,随着PLLA疏水链段变长,PLEL软段分子量增大,材料的亲水性降低,交联度和降解速率变小.相同的软段,基于硬段HDIHEMA的PUA材料比IPDI-HEMA的PUA有较低的T_g,较高的亲水性和降解速率.因为IPDI有环状结构,降低了PUA与水的相互作用.在3种不同降解条件下,氧化降解速率最高,酶解的速率高于水解.PUA材料的氧化降解速率取决于软段中PEG的含量,PLEL1000-HDI中PEG含量最高,其氧化降解最快,13周内失重率达到82.6%.