人工神经网络技术在板料激光弯曲中的应用

基于人工神经网络基本理论,建立在板料激光弯曲中预测材料表面最高温度、弯曲角度的BP网络模型。借助于MATLAB仿真软件中的神经网络工具箱作为开发平台,将试验样本数据和经过试验验证的数值计算结果作为补充的样本数据用于BP网络的训练,利用训练好的BP网络对非线性的样本数据规律进行拟合,实现激光加工工艺参数的优化,为实际生产和加工提供有效的依据。     

Fabrication of patterned gold electrodes with spin-coated-and-fired Au(1 1 1) film by the soft lithography

We prepared high quality Au(1 1 1) film on Si wafer through the spin coating and thermal decomposition of a gold ink, spin-coated-and-fired (SCAF) Au film. The X-ray measurements, XRD and pole-figure analysis, showed that the SCAF Au film has a (1 1 1) out-of-plane orientation with a random in-plane orientation. In order to confirm the chemical activity of the SCAF Au film, we demonstrate the formation of patterned structures with the film by using soft lithography technique. The chemical activities of this physically stable SCAF Au film to the alkanethiols were at least equivalent those of physically deposited the Au films. The possibility of the mass production of micro patterned structure with the SCAF Au film was also demonstrated over the wide region on Si wafer by the microcontact lithography. These suggest that the Au film will help the easy fabrication of various nanosized devices on Si wafer and other substrates.     

Novel methods and universal software for HRXRD, XRR and GISAXS data interpretation

Several novel methods for evaluation and interpretation of X-ray data from modern nanostructures are presented along with their applications. The background of methods and their relations to fundamental problems of X-ray analysis is shortly described. The key features of LEPTOS software, which is designed for the analysis of X-ray data measured with various geometries and setups and implements all discussed techniques, are discussed.     

Contact angle hysteresis of liquid drops as means to measure adhesive energy of zein on solid substrates

Adhesion of zein to solid substrates has been studied using surface energy profiles as indices and by adhesion mapping using atomic force microscopy (AFM). Different plasticizers like glycerol and sorbitol have been used to form mixed films with zein and properties of these films are studied using surface energy profiles. Comparison of the results from the different mixed samples with those from the pure zein films showed that force mapping could identify areas rich in protein. The adhesion maps produced were deconvoluted from sample topography and contrasted with the data obtained from contact angle measurements. A comparison of the two methods shows that the extent of contact angle hysteresis is indicative of both hydrophobicity of the surface as well as the force of adhesion. Mechanical properties and microstructure of zein films prepared by casting from solutions and using Langmuir-Blodgett film technique have been investigated. Pure zein seemed brittle and exhibited an essentially linear relationship between stress and strain. Films with plasticizer were tougher than these films. In general, mixed films showed better mechanical properties than pure films and had higher ultimate tensile strength and increased per cent elongation. Further, the mixed films of zein showed a higher force of adhesion compared to the pure films.     

薄膜偏振分光镜的研究

概述薄膜偏振分光镜的研究现状及其主要特点，重点分析薄膜偏振分光镜的设计原理,并利用等效折射率的方法计算中心波长的反射率．     

激光二极管线阵光束变换研究

推导出激光二极管线阵光束通过透镜系统的光强分布表达式，分析了出射光束的传输特性，设计一种凹柱透镜的光束变换系统得到一维均匀光强分布。此外，给出扩展角宽度的计算公式。     

新型AFM探针的制备及应用

采用熔拉 -腐蚀复合方法 ,将普通单模石英光纤制成直锥形光纤探针。利用自制工具将探针打弯 ,制成悬臂式光纤探针 ,在AFM上取得了较理想的测试结果。将自制光纤探针和商用硅材料探针获得的两种扫描图像进行了对比 ,分析了悬臂式光纤探针的特点     

多夹层板壳的非线性理论及应用（Ⅲ）：扁壳的弯曲和稳定

本文根据文[1]获得的多夹层扁壳非线性基本方程，求解了各种载荷及边界条件下矩形底面多夹层扁壳的非线性弯曲问题，多夹层板、扁柱亮在轴向压力作用下的稳定问题，以及一般形状的扁壳在边界作用力下的变形．     

Molecular Orbital Calculations on 2, 4, 6-Trinitrotoluene

Three ab initio calculations (HF/6-3IG, HF/6-3IG*, and HF/6-3IG**) on 2,4,6-trinitrotoluene were made, The results compare well with xray data, except dihedral angles of NO₂ relative to the plane of the benzene ring. The deviations are attributed to packing forces and steric effects in the crystal. The most stable structure was a torsional angle 10° of the methyl top with the benzene ring, unlike toluene. The rotational barriers of the methyl top and the 4-nitro group are small. Hydrogen bonding, dipole moments and total atomic charges arc calculated.     

斜孔气膜冷却数值模拟分析

本文通过数值模拟分析圆柱孔和扩散孔的单斜孔气膜冷却特性,考察复合角、孔型和吹风比对流场和气膜冷却效果的影响。结果表明,复合角的引入使气膜侧向分布更宽,但冷却效果沿主流方向衰减更快。适中吹风比得到的气膜能更有效的保护壁面。在相同吹风比和复合角条件下,扩散孔的气膜冷却效率比圆柱孔更好,且冷却更为均匀持久。