Modified Wave Particle Duality and Black Hole Physics

de Broglie relation is revisited, in consideration of a generalization of canonical commuting relation. The possible effects on particle's localization and black hole physics are also discussed, in a heuristic manner.     

基于LSDANet的手机芯片屏蔽壳表面缺陷检测方法

为了解决手机芯片屏蔽壳表面白印缺陷微小、尺度各异等因素影响检测快速性和准确性的问题,本文提出一种基于长短连接通路和双注意力网络(long short link and double attention network, LSDANet)的手机芯片屏蔽壳表面缺陷检测方法。首先,通过构建基于编码和解码的语义分割模型和利用长短距离连接通路,提高网络模型对尺度各异缺陷的特征提取能力。其次,分别设计基于通道和空间的注意力机制,增大5—10 pixel尺寸的白印缺陷在空间和通道上的特征权重。最后,融合双注意力机制和长短距离连接通路分割模型,构建LSDANet缺陷检测网络,应用于手机芯片屏蔽壳表面缺陷检测。实验数据表明,LSDANet网络能够达到96.21%的平均像素精度、66.13%的平均交并比和39.03的每秒检测帧数,相比多种语义分割算法均具有更高的检测精度和速度。     

基于改进VGG网络的单体热电池X光图像无损检测方法研究

为解决单体热电池生产中出现的安装错误、人工检测耗时耗力的问题,提出一个结合迁移学习和卷积 神 经网络(convolutional neural network,CNN) 的单体热电池缺陷检测模型。首先,对数据集图像进行裁剪、加噪等预处理,以VGG16(visual geometry group 16) 网络作为 模型的骨干架构,在瓶颈层后增添选择性核(selective kernel,SK) 卷积;然后,增添全局平均池化(global average pooling,GAP) 层, 增加Dropout层及添加 L2 正则化等微调操作,得到单体热电池缺陷检测模型Q-VGGNet;最后,在大型公开数据集ImageNet上进 行预训练学习,将获得的权重参数迁移到单体热电池图像识别模型Q-VGGNet上。测试实验表明:6种 网络模型对数据集缺陷图像的总体识别准确率分别达到了98.39%、94.44%、97.27%、96.34%、93.71%、 95.61%,Q-VGGNet网 络模型 对合格图像和 漏装负极、极耳断裂、漏装集流片3种缺陷图像 识别准确率 分别达到了99.6%,95.9%,99.6%和98.4%。检测结果表明:该方法能够更准确、快速地检测热电池缺陷, 拥有良好的缺陷诊断能力,较传统方法提高近3%,为人工检测单体热电池缺陷提供了良好的解决途径。     

基于双通道注意力的轻量化PCB缺陷检测研究

印刷电路板 (printed circuit board,PCB)在实际生产过程中存在缺陷样式多种多样、缺陷小、缺陷位置难以定位的问题,而一个巨大的模型难以实现实时检测的要求,且大量的深度可分离卷积层建立的轻量级模型也不能达到足够的精度,为此提出一种基于YOLOv5s的PCB缺陷检测算法。 将原始Backbone的Conv模块跟C3模块用GhostConv替换,在Neck部分则引入了一种新的轻量级卷积技术GSConv,减轻模型大小的同时保持精度,GSConv在模型的准确性和速度之间完成了一个极好的权衡,针对许多注意力模块无法关注全局信息同时模型大的问题,提出了多尺度的轻量化双通道注意力模块(double channel depthwise attention module,DWAM),进一步提高模型精度。通过多组实验, 结果表明,改进算法所有类别的平均mAP为99.14%,且模型的GFLOPs为7.194 G,Params为7.175,原始的YOLOv5s平均mAP为96.86%,GFLOPs为6.89 G,Params为6.596,虽然Params以及GFLOPs有所增大,但是还是满足轻量网络的要求,并且精度相对于YOLOv5s提高了2.25%,且对于每个类别的缺陷识别准确率都有改善,大幅减少计算量和模型参数的同时保证了准确率,满足工业检测生产需求的同时便于移动端部署。     

金红石TiO_2中本征缺陷扩散性质的第一性原理计算

基于密度泛函理论的爬坡弹性带方法,对金红石相二氧化钛晶体中钛间隙、钛空位、氧间隙、氧空位4种本征缺陷的扩散特征进行了研究.对比4种本征缺陷在晶格内部沿不同扩散路径的过渡态势垒后发现,缺陷扩散过程呈现出明显的各向异性.其中,钛间隙和氧间隙沿[001]方向具有最小的扩散势垒路径,激活能分别为0.505 eV和0.859 eV;氧空位和钛空位的势垒最小的扩散路径分别沿[110]方向和[111]方向,激活能分别为0.735 eV和2.375 eV.     

Radiation chemistry of tris(acetylacetonato) cobalt(iii) in aqueous solutions

Abstract

On radiolysis tris(acetylacetonato) cobalt(III) in aqueous solutions is found to get reduced by reaction with (1) hydrated electrons, (2) H atoms, (3) OH radicals and (4) C₂H₂OH radicals. The bimolecular rate constants for the first three reactions, determined by competition kinetics are: 4 × 10¹⁰, 2.3 × 10⁹ and 4.7 × 10⁹ M^?1sec^?1 respectively. Absorption spectra of the irradiated solutions indicate the formation of bis(acetylacetonato) cobalt(II) from reaction (1), but not from (3). The total cobaltous yield in air-free solutions is given byG(Co⁺⁺) = 5.6 and 6.5 at pH 6.5 and 1 respectively. It appears that G_eaq- ∽ _H ⁺ G_oH ∽ 2.8 in neutral solutions. Considerations of material balance for the primary yields of radiolysis of water suggest the possibility that the so-called independent H-atoms in neutral solutions are probably excited water molecules or ion-pairs.     

Face and eyes localization algorithm in thermal images for temperature measurement of the inner canthus of the eyes

In this paper, a novel algorithm for the detection and localization of the face and eyes in thermal images is presented, particularly the temperature measurement of the human body by measuring the eye corner (inner canthus) temperature. The algorithm uses a combination of the template-matching, knowledge-based and morphological methods, particularly the modified Randomized Hough Transform (RHT) in the localization process, also growing segmentation to increase accuracy of the localization algorithm. In many solutions, the localization of the face and/or eyes is made by manual selection of the regions of the face and eyes and then the average temperature in the region is measured. The paper also discusses experimental studies and the results, which allowed the evaluation of the effectiveness of the developed algorithm. The standardization of measurement, necessary for proper temperature measurement with the use of infrared thermal imaging, are also presented.     

Effect of Vacancy Defects on the Young's Modulus and Fracture Strength of Graphene: A Molecular Dynamics Study

The Young's modulus of graphene with various rectangular and circular vacancy defects is investigated by molecular dynamics simulation. By comparing with the results calculated from an effective spring model, it is demonstrated that the Young's modulus of graphene is largely correlated to the size of vacancy defects perpendicular to the stretching direction. And a linear reduction of Young's modulus with the increasing concentration of mono‐atomic‐vacancy defects (i.e., the slope of ?0.03) is also observed. The fracture behavior of graphene, including the fracture strength, crack initiation and propagation are then studied by the molecular dynamics simulation, the effective spring model, and the quantized fracture mechanics. The blunting effect of vacancy edges is demonstrated, and the characterized crack tip radius of 4.44 Å is observed.     

Selective etching of ZnTe in HF:H2O2:H2O solution: Interpretation of extended defect‐related etch figures

HF:H₂O₂:H₂O solution (40%wt.HF: 30wt.%H₂O₂: H₂O, 3:2:1 by volume) was used to reveal extended defects (line, face and volume defects) in bulk ZnTe crystals grown from Te solution. The etch patterns were analyzed based on their size, shape and distribution. The etch figures, both in the shape of pits and hillocks with high resolution, show forms controlled by the symmetries of the respective faces were produced. Two different sizes of pits were observed, the larger‐size pits correspond to dislocations penetrating the surface, however, the smaller‐size texture pits are produced on the defect‐free region, which serve as standard pits on respect faces. The face defects, such as grain boundaries, sub‐grain boundaries, dislocation walls, twins and stacking faults, can be all displayed clearly. Another essential feature of the etchant is that, it can effectively dissolve Te‐rich phase (Te inclusion/precipitates), which makes it promising to reveal the shape of this volume defect.