An MAS Framework for Speculative Trading Research in Stock Index Futures Market

In this paper, we develop a futures trading simulation system to determine how speculative behavior affects the futures mar ket. A eonfigurable client is designed to simulate traders, and users can define trade strategies using different programming languages. A lightweight server is designed to handle large scale and highly eoncmTent access requests from clients. HBase is chosen as the database to grantee sealability of the system. As HBase only supports single row transaction, a transaction support mechanism is developed to improve data consistency for HBase. The HBase transaction support mecha nism supports multirow and multitaMe by using two phase commit protocol. The experiments indicate that our system shows high efficiency in the face of the large scale and high concurrency access request, and the read/write performance loss of HBase introduced by the transaction support mecha nisms is also acceptable.     

可程控核能谱信号放大器设计

为了提高能谱测量系统中放大成形部分的灵活性,采用单片机控制DAC与一级放大结合的方法,研制一种放大倍数可程控的核能谱信号放大器,使其能同时适用于X荧光仪,伽玛谱仪等核能谱测量仪器,实现0～100倍程控放大。试验测试结果表明,设计电路完全达到设计指标要求。     

可用于高功率脉冲激光的面阵CCD模式测量装置

本文介绍了一种用面阵ＣＣＤ摄像机作探测器的激光光束测量装置。整个装置包括光束衰减器、单脉冲选取及脉冲同步、光束直径匹配、ＣＣＤ摄像机、图像卡、计算机及监示器以及系统软件。软件根据激光混合模的二阶矩阵理论［１］编制，可测量高功率、高重复频率脉冲激光的空间能量分布，并可对所测结果进行模拟。由软件给出所测的光束参数，可对光束质量作出正确评价。     

超级计算机系统实时节能控制技术的理论与实践分析

计算机的能耗总和数量非常大,如何做到计算机的“省电、节能、环保”这对社会的节能减排非常重要。本文阐述分析了超级计算机系统实时节能控制技术的基本理论,并对共享计算机资源实时任务执行概率的充要条件和概率的确定进行了阐述,最后分析了切点机的切入和切出的安全问题。     

激光-感应复合熔覆Ni基WC复合层的工艺研究

为了提高熔覆效率与消除熔覆层的裂纹,采用激光-感应复合熔覆的方法在A3表面获得了无气孔与裂纹的Ni基WC复合层。研究了不同的加工参量对复合层质量的影响,结果表明,随着激光比能的增加,粉末面密度增加;在相同的激光比能条件下,随着粉末面密度增加,熔覆层的高度增加,稀释率减小;在相同的粉末面密度条件下,随着激光比能的增加,熔覆层的宽度略有增加。此外,相对于单纯的激光熔覆技术,激光-感应复合熔覆的效率约可以提高5倍。在激光-感应复合熔覆过程中,熔覆层与基材间的温度梯度大大降低,这是Ni基WC复合层无裂纹的关键原因。     

Feature of Low-Lying States of a Planar Three-Boson System

The energy spectrum of the low-lying states of a system of three charged bosons confined in a two-dimensional harmonic trap is investigated as a function of the confinement strength ω₀ by means of the exact diagonalization of the Hamiltonian. The important feature of the low-lying states of three charged bosons in two-dimensional space is obtained via an analysis of the energy spectrum.     

Te溶剂Bridgman法CdMnTe晶体核辐射探测器的制备和表征

碲锰镉(CdMnTe)作为性能优异的室温核辐射探测器材料,可用于环境监测和工业无损检测领域。本文中采用Te溶剂Bridgman法生长In掺杂Cd_0.9Mn_0.1Te晶体,制备成10 mm×10 mm×2 mm大小的室温单平面探测器,研究了该探测器对²⁴¹Am@59.5 keV γ射线源的能谱响应。通过表征红外透过率、电阻率以及探测器能谱响应等参数,综合评定了探测器用CdMnTe晶体的质量、电学和探测器性能。结果表明,晶片的红外透过率均在55%以上,最好可达到60%。采用湿法钝化,100 V偏压下的漏电流由钝化前的9.48 nA降为钝化后的7.90 nA,钝化后的电阻率为2.832×10¹⁰ Ω·cm。在-400 V反向偏压下,CdMnTe探测器对²⁴¹Am@59.5 keV γ射线源的能量分辨率在钝化前后分别为13.53%和12.51%,钝化后的电子迁移率寿命积为1.049×10^-3 cm²/V。研究了探测器的能量分辨率随电压的变化特性,当偏压≤400 V时,探测器的能量分辨率主要由载流子的收集效率决定,而当偏压>400 V时,能量分辨率由漏电流决定。本文研究结果表明,Te溶剂Bridgman法生长的CdMnTe晶体质量较好,电阻率和电子迁移率寿命积满足探测器制备需求。     

纳米氧化镱对熔融石英析晶动力学机制的影响

本文研究引入纳米氧化镱对熔融石英析晶机制及动力学过程的影响.通过X射线衍射仪(XRD)测试结果分析了纳米氧化镱的引入对熔融石英陶瓷析晶率的影响,采用动力学方法分析了纳米氧化镱的引入对熔融石英陶瓷析晶机制的影响,同时探讨了其等温析晶动力学过程.研究表明,熔融石英陶瓷的晶粒向二维兼有一维及三维的方式生长,引入纳米氧化镱的熔...     

Dielectric Properties Investigation of Metal–Insulator–Metal (MIM) Capacitors

This study presents the construction and dielectric properties investigation of atomic-layer-deposition Al₂O₃/TiO₂/HfO₂ dielectric-film-based metal–insulator–metal (MIM) capacitors. The influence of the dielectric layer material and thickness on the performance of MIM capacitors are also systematically investigated. The morphology and surface roughness of dielectric films for different materials and thicknesses are analyzed via atomic force microscopy (AFM). Among them, the 25 nm Al₂O₃-based dielectric capacitor exhibits superior comprehensive electrical performance, including a high capacitance density of 7.89 fF·µm⁻², desirable breakdown voltage and leakage current of about 12 V and 1.4 × 10⁻¹⁰ A·cm⁻², and quadratic voltage coefficient of 303.6 ppm·V⁻². Simultaneously, the fabricated capacitor indicates desirable stability in terms of frequency and bias voltage (at 1 MHz), with the corresponding slight capacitance density variation of about 0.52 fF·µm⁻² and 0.25 fF·µm⁻². Furthermore, the mechanism of the variation in capacitance density and leakage current might be attributed to the Poole–Frenkel emission and charge-trapping effect of the high-k materials. All these results indicate potential applications in integrated passive devices.     

Precise Quantification of Molybdate In Vitro by the FRET-Based Nanosensor ‘MolyProbe’

Molybdenum (Mo) is an essential trace element in all kingdoms of life. Mo is bioavailable as the oxyanion molybdate and gains biological activity in eukaryotes when bound to molybdopterin, forming the molybdenum cofactor. The imbalance of molybdate homeostasis results in growth deficiencies or toxic symptoms within plants, fungi and animals. Recently, fluorescence resonance energy transfer (FRET) methods have emerged, monitoring cellular and subcellular molybdate distribution dynamics using a genetically encoded molybdate-specific FRET nanosensor, named MolyProbe. Here, we show that the MolyProbe system is a fast and reliable in vitro assay for quantitative molybdate determination. We added a Strep-TagII affinity tag to the MolyProbe protein for quick and easy purification. This MolyProbe is highly stable, resistant to freezing and can be stored for several weeks at 4 °C. Furthermore, the molybdate sensitivity of the assay peaked at low nM levels. Additionally, The MolyProbe was applied in vitro for quantitative molybdate determination in cell extracts of the plant Arabidopsis thaliana, the fungus Neurospora crassa and the yeast Saccharomyces cerevisiae. Our results show the functionality of the Arabidopsis thaliana molybdate transporter MOT1.1 and indicate that FRET-based molybdate detection is an excellent tool for measuring bioavailable Mo.