标准圆筒试验技术与数据处理方法研究

 对标准圆筒试验技术与数据处理方法进行了深入研究,在狭缝扫描实验中建立了新型、高效的照明技术、底片判读方法以及数据处理方法,得到了精度高、信息丰富的圆筒壁质点上的位移、速度、加速度和比动能结果。同时,通过VISAR技术直接测量了圆筒外表面径向膨胀速度-时间曲线,进而积分得到位移-时间曲线,与狭缝扫描结果相互印证和补充,进一步提高了测试可靠性。     

Optical system and lens design for Blu-ray disc optical pick-up

During the design process of Blu-ray disc optical pick-up (BD OPU), the optical system and the collimator lens design is especially important. This paper designs an optical system and some lenses for the BD OPU, including collimator lens, beam shaping lens for laser beam shaping, and cylinder lens for signal detecting. In this OPU, we use a triplet lens to collimate the laser beam. At the same time, we build a series of assembly jigs to make sure that each lens can be put into the OPU basement properly. At last, we get the reading spot image and S-curve photo of OPU, which can be used to read Blu-ray disc (BD).     

三维轴对称折叠腔CO2激光器的位相锁定

在一新型三维轴对称腔CO2激光器的基础上提出了一种对此激光器位相锁定的方法。通过在输出镜后放置一具有反射和整形作用的凹凸镜,让作为输出注入光束的谐振腔优先起振。此腔输出的光束到达凹凸镜时被其反射。利用重新定义光斑半径的方法,证明此光束能够覆盖其他放电管输出的光束,根据几何光学,此光束能反射进入各个放电管。然后利用光子简并度的概念证明了反射光束能够控制腔内的本征模式,并且数值分析了注入锁定后腔内模式匹配。在反射注入锁定的情况下,给出了数值计算的光强输出及其模拟,结果证明经位相锁定后,激光器输出光束的质量有了很大的提高。     

Effect of the Parameters of Three-Mirror Resonators on the Spectral Characteristics of Single-Pulse Laser Generation with Self-Injection of Priming Radiation

Based on a semiclassical theory, investigations were made of the dynamics and spectral composition of pulsed generation with self-injection of priming radiation from the active part of a three-mirror linear resonator, the passive part of which contains an active loss modulator and serves as the output reflector of the laser. It is shown that there exists a range of resonator parameters at which pulsed lasing has virtually a single frequency irrespective of the detuning of the frequencies of the priming radiation and of the nearest eigenmode of the composite resonator. Considering graphically the phase conditions of generation, it is established that among pulsed lasers with self-injection of priming radiation which are constructed on the basis of three-mirror linear and branched resonators, the most efficient for creating single-frequency generation are those in which the length of the main resonator, where generation of the pulse occurs, is larger than the length of the additional one intended for forming the priming radiation. With an inverse ratio of the lengths of the resonators, the conditions of single-frequency pulsed generation becomes dependent on the priming radiation frequency.     

光纤放大器增益饱和对有源光纤环形腔滤波特性的影响

从理论和实验两个方面研究了有源光纤环形腔滤波器输入光功率对光纤放大器增益的影响及由此引起的对有源光纤环形腔滤波特性的影响。在考虑上述影响的情况下 ,对有源光纤环形腔滤波器参数的优化作了讨论     

Au-Au2S复合纳米球壳微粒的空腔谐振及参量讨论

Au-Au2S复合纳米球壳微粒（金纳米球壳），是一种新型复合结构的纳米微粒，其结构为纳米级的Au2S介质球外包裹了一层几个纳米厚的黄金球壳。这种复合纳米球壳微粒可以被抽象为球型谐振腔。报道了它的空腔谐振吸收的实验结果，并且运用经典理论结合介观结构特征，讨论了有关Au-Au2S复合纳米球壳微粒空腔谐振吸收的一些重要参量，其中包括谐振吸收波长、品质因数、谐振能量等。另外，还讨论了金球壳的厚度对这些重要参量的影响。     

半球封闭圆柱体表面绕射声场研究

基于一致性几何绕射理论,对半球封闭圆柱体上半球表面的高频绕射声场进行了数值计算与分析。获得了单个点声源作用下,半球表面声场的声压分布图,其中包括一些干涉条纹,干涉条纹的区域及形状与点声源的位置和频率有关;在多个点声源作用下,发现在接近半球顶点的附近,多个声波经多途传播后在该区域的叠加声压由衰减转为增强的现象。     

Thermal radiation effects on Williamson fluid flow due to an expanding/contracting cylinder with nanomaterials: Dual solutions

The phenomena of heat and mass transfer during the flow of non-Newtonian transfer are amongst the core subjects in mechanical sciences. Recently, the nanomaterials are among the eminent tools for improving the low thermal conductivity of working fluids. Therefore, in view of the existing contributions, this article presents a two-dimensional numerical simulation for the transient flow of a non-Newtonian nanofluid generated by an expanding/contracting circular cylinder. This critical review further explores the impacts of variable magnetic field, thermal radiation, velocity slip and convective boundary conditions. The basic governing equations for Williamson fluid flow are formulated with the assistance of boundary layer approximations. The non-dimensional form of partially coupled ordinary differential equations has been tackled numerically by utilizing versatile Runge–Kutta integration scheme. The momentum, thermal and concentration characteristics are investigated with respect to several critical parameters, like, Weissenberg number, unsteadiness parameter, viscosity ratio parameter, slip parameter, suction parameter, magnetic parameter, thermophoresis parameter, Brownian motion parameter, Prandtl number, Lewis number and Biot number. The outcomes of the systematic reviews of these parameters and forest plots are illustrated. The study reveals that multiple solutions for the considered problem occurs for diverse values of involved physical parameters. The computed results indicate that the friction and heat transfer coefficients are significantly raised by the magnetic parameter for upper branch solutions.     

嵌入到Fabry-Perot谐振腔的双晶约瑟夫森结阵列的阻抗匹配和相位锁定研究

在He等人所做的嵌入到Fabry-Perot谐振腔中约瑟夫森结阵列的微波辐照研究基础上,提出了同时实现约瑟夫森结阵列阻抗匹配和相位锁定的方法,进行了相关的电磁仿真和数值计算.双晶约瑟夫森结阵列被制作在YSZ双晶基片上,同时被嵌入到Fabry-Perot谐振腔内.通过在基片上制作与结阵列集成的串联馈电半波偶极天线阵,并对其结构进行优化实现了结与天线的匹配,数值计算表明结的辐射效率达到94%;利用天线阵辐射场的特征和对模型合理的设计,使Fabry-Perot谐振腔和基片同时谐振在合适的模式下,从而使结阵列与谐 关键词： 约瑟夫森结阵列 阻抗匹配 相位锁定 Fabry-Perot谐振腔     

约瑟夫森结(阵列)与谐振器的耦合效应研究

利用一种新的电路模型系统研究了约瑟夫森结(阵列)与谐振器的耦合效应.以结的电压自锁定台阶幅度ΔI为目标值,得到了谐振电路的电阻R、谐振频率fr对耦合的影响规律,并给出了合理解释;以结阵列的相位互锁定强度IL为目标,研究了IL对锁定电压VL的依赖关系,同时,通过相关计算将其与通常电路模型下得到的结果进行了比较.