感应耦合等离子刻蚀技术研究

依据感应耦合等离子体的刻蚀机理，对影响刻蚀的两个重要参数及先进的硅刻蚀技术进行了较深入的研究，并对影响刻蚀效果的参数进行了实验研究，刻蚀出了20μm深，2μm宽的谐振器结构，得到了最佳的工艺参数。     

圆柱绕流尾迹中相干结构对湍流特性的影响

实验研究了圆柱尾迹中相干结构对湍流平均量的影响.用一个X热线在距离圆柱体y/d=4测量参考信号,用X热线和冷线相结合的三线探头测量从x/d=10～40的圆柱绕流尾迹中的速度和温度脉动,用条件平均的方法研充圆柱绕流近尾迹中的相干结构,并对相干结构对动量和热量的湍流输运过程的影响进行初步分析.结果表明:相干结构对尾迹中速度的横向脉动影响最大;相干结构对湍流参数的影响随x/d的变化明显.该工作还对相干结构引起的湍动能产生率变成负和逆温度梯度输运现象做了定性的解释.     

应用增量理论考虑应变硬化效应包辛格效应和温度对机械性质影响的自增强厚壁圆筒分析

本文提出的采用增量理论的分析模型和方法可以定量分析应变硬化、包辛格效应和材料机械性质随温度变化等因素对自增强厚壁圆筒中残余应力和操作应力分布的影响.厚壁圆筒看成由N个同轴薄壁圆筒套在一起组成的构件;采用包括弹性、塑性和温度应变的增量型本构关系和相容条件导出了自增强圆筒的基本方程;设计了计算机程序并给出了分析实例。分析结果表明,应变硬化会减小塑性区并降低残余应力;包辛格效应使反向屈服容易出现;温度升高将使残余应力和热应力松驰.     

厚壁圆筒自紧问题的弹粘塑性有限元分析

在双剪应力强度理论的基础上，应用弹粘塑性模型求解厚壁圆筒自紧问题，算例表明，这一算法是可行有效的。     

Influence of corrugation frequency and amplitude on the stress state of hollow elliptic cylinders

The influence of corrugation frequency and amplitude on the displacement and stress fields is analyzed based on an approach to solving stress problems for corrugated elliptical cylinders with certain end conditions.Translated from Prikladnaya Mekhanika, Vol. 40, No. 9, pp. 87–93, September 2004.     

轴压作用下充液圆柱壳屈曲的实验研究

本文从实验及理论两个方面对充满液体的圆柱壳在轴向压力作用下液体内压的变化进行了实际测试及理论定性分析．采用薄壳理论分析了屈曲前液体内压随轴向压力的变化规律，讨论了壳材料、几何参数及边界约束对内压的影响．通过实验实际测定了内压随轴向压力的变化规律．通过实验手段测定了充满液体的圆柱壳临界载荷、屈曲模态，讨论了充满液体的圆柱壳的承载能力等问题．     

绕旋转圆柱流动涡尾流结构和临界状态特性

采用作者提出的基于区域分解，有限差分法与涡法杂交的数值方法，结合高阶隐式差分格式，和以修正的不完全ＬＵ分解为预处理器的共轭梯度法作求解器，系统地研究了雷诺数Ｒｅ＝１０００，旋转速度比α∈（０．５，３．２５）范围内，绕旋转圆柱从突然起到充分发展，长时间内尾流旋涡结构和阻力，升力系数的变化规律，计算所得流动图案与实验流场显示符合很好。数值试验证帝了临界状态的存在，并首次给出了临界状态时的旋涡结构特性。     

Spatial Estimates for the Constrained Anisotropic Elastic Cylinder

This paper establishes spatial estimates in a prismatic (semi-infinite) cylinder occupied by an anisotropic homogeneous linear elastic material, whose elasticity tensor is strongly elliptic. The cylinder is maintained in equilibrium under zero body force, zero displacement on the lateral boundary and pointwise specified displacement over the base. The other plane end is subject to zero displacement (when the cylinder is finite, say). The limiting case of a semi-infinite cylinder is also considered and zero displacement on the remote end (at large distance) is not assumed in this case. A first approach is developed by considering two mean-square cross-sectional measures of the displacement vector whose spatial evolution with respect to the axial variable is studied by means of a technique based on a second-order differential inequality. Conditions on the elastic constants are derived that show the cross-sectional measures exhibit alternative behaviour and in particular for the semi-infinite cylinder that there is either at least exponential growth or at most exponential decay. A second approach considers cross-sectional integrals involving the displacement and its gradient and furnishes information upon the spatial evolution, without restricting the range of strongly elliptic elastic constants. Such models are principally based upon a first-order differential inequality as well as on one of second order. The general results are explicitly presented for transversely isotropic materials and graphically illustrated for a cortical bone.     

亚临界雷诺数下圆柱绕流的大涡模拟

本文应用Smagorinsky涡粘性模式和二阶精度的有限体积法对圆柱绕流的流场进行大涡模拟．求解了非正交曲线坐标系下的N-S方程,对雷诺数为100和20000的工况进行了计算．计算结果与实验及动力涡粘性模式的结果进行了比较,表明计算对于层流及高亚临界雷诺数的湍流流动是合理的